• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.339-344
• /
• 1998

Since 1997, JAB (The Japan Accreditation Board for Conformity Assessment) had started the activity of accreditation for the laboratory based on U.S. PL101-592: the Fastener Quality Act that was signed by President Bush on 1990. The number of accredit laboratories are 69 in Japan, 21 in Taiwan, 2 in Korea and 189 in U. S. A, as of 09/10/1998. The JAB accreditation encompasses the requirements of the ISO/IEC Guide 25, and the relevant requirements of ISO 9002. The purpose of ISO/IEC Guide 25, also had been harmonized as JIS Z 9325 'General requirements for the competence of calibration and testing laboratories 'mainly facilitates and promotes acceptance of calibration and test results between countries to avoid barriers to trade through as 'one stop testing'. The features and differences between Guide 25 and ISO 9000 will be clarify in this report.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.317-325
• /
• 2011

Vehicle model validation for the static vehicle testing has been done by comparison of the simulation results and test results and the parameters of the vehicle model to be used in the simulation have been adjusted to reflect the measured behaviour. The vehicle model fort the simulation should be validated by suitable tests and/or practical experience. The static vehicle test used to validate the vehicle model are the weight measurement, the wheel offloading test, the bogie rotational resistance test and the sway test. Finally, the computer simulation model has been validated and using the validated vehicle model the acceptance of the vehicle safety of the resistance to flange climbing derailment at low speed can be examined.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.8 no.1
• /
• pp.6-11
• /
• 1988

The comparison and analysis of flaw detectability, flaw sizing methods and allowable criteria in accordance with the applicable codes, ASME and RCC-M Code, in ultrasonic examination of pressure vessel in nuclear power plants were studied. Accordding to the codes, calibration blocks were made. The artificial flaws such as disc and band types in test specimens were machined. They were detected and evaluated with etch code requirements and measured values were compared with the actual flaws.

• Journal of the Korean Statistical Society
• /
• v.35 no.2
• /
• pp.167-177
• /
• 2006

An important role of statistical analysis in science is interpreting observed data as evidence, that is 'what do the data say?'. Although standard statistical methods (hypothesis testing, estimation, confidence intervals) are routinely used for this purpose, the theory behind those methods contains no defined concept of evidence and no answer to the basic question 'when is it correct to say that a given body of data represent evidence supporting one statistical hypothesis against another?' (Royall, 1997). In this article, we use likelihood ratios to measure evidence provided by record values in favor of a hypothesis and against an alternative. This hypothesis is concerned on mean of an exponential model and prediction of future record values.

• The Journal of Society for e-Business Studies
• /
• v.9 no.1
• /
• pp.255-268
• /
• 2004

User authentication is indispensable in computer login and internet banking. Usability as well as security is needed in user authentication software. To develop the software systematically, development process must be defined, and it can result in the improvement of software maturity. In this paper, a process needed to develop user authentication software systematically is proposed from experience of developing visual password input software. This process is composed of 6 phases and 15 activities. It is able to improve usability with its requirement analysis, planning, integration testing, and acceptance testing activity.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.5
• /
• pp.581-585
• /
• 2010

As developers and testers today we all suffer from increasing project complexity, the risks of late defect discovery, repetitive manual processes, and the risk of release delays. In this paper, we introduce an effective framework for automated testing to help solve such problems. Those that are new to testing do not need to delve into complex automation tools or test scripts. This framework helps automate the distribution, execution and results analysis of test cases. It also aids communication among the various stakeholders, using tables for representing tests and for reporting the results of automatically checking those tests. This paper describes the practices and benefits of using the proposed framework.

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.1
• /
• pp.53-65
• /
• 2007

PACS has been run at the Kyung Hee University Medical Center(KHMC) since 2001, and the installation and operation of PACS have contributed to automation and quantification of KHMC's medical environment During these five years our greatest concern is how to make our own guiding principle of diagnostic monitor QA which is adapted to international standards. In accordance with the terms of 'KHMC QA Guideline', 'AAPM TG18', 'SMPTE RP133', 'DICOM Part14', 'DIN V 6868-57', 'JESRA X-0093', 'JIS Z4752-2-5' and 'KCARE', concern about quality assurance of medical images are on the increase. With the investigation of acceptance testing and quality control of international standards for medical display devices, and data collection and analysis for recommended guideline, it is reported that acceptance testing(quality control), including geometrical distortion, display reflection, luminance response, luminance uniformity, display resolution, display noise, veiling glare and color chromaticity being adequate and effective to domestic hospital environments for medical display devices and assessment methods according to each performance. Accordingly, KHMC classified the checkpoint items by period, at the time of monitor setting, monthly, quarterly, half-yearly and annually. Periodic classification of checkpoint items for monitor QA makes a good guideline for image QA/QC and useful guideline for persistent good quality of monitor.

• The Journal of the Korea Contents Association
• /
• v.7 no.7
• /
• pp.114-123
• /
• 2007

The increasing use of computed tomography (CT) as a diagnostic tool creates the need from and efficient means of evaluating the performance of the CT scanner now in use. Accordingly, acceptance testing and quality assurance of CT is of great importance. The aim of this study is to analyze of AAPM CT performance phantom in the CT accreditation program. The modular phantom offers the CT system with which to measure eight performance parameters. The parameters are listed of CT attenuation coefficient of water, noise, uniformity, spatial resolution, contrast resolution, slice thickness (5 and 10 mm), artifacts and alignment. The phantom evaluation was done by two radiologists. The acceptance testing protocol described here in demonstrates the successful of the guidelines for the quality assurance using AAPM CT performance phantom. We need to be upgraded for the CT image quality and make the standard reference of the quality assurance in the CT.

• Korean Journal of Digital Imaging in Medicine
• /
• v.10 no.1
• /
• pp.21-28
• /
• 2008

Diagnostic display monitor QA according to AAPM TG18 is usually performed by PACS administrator, product manager and reading doctor, and for acceptance testing and periodic quality control evaluation, a combination of visual and quantitative tests can be used, as outlined in sections 5 and 6 of 'assessment of display performance for medical imaging systems'. Although many display tests can be performed visually, a more objective and quantitative evaluation of display performance requires special test tools. The required instruments vary in their complexity and cost, depending on the context of the evaluation(research, acceptance testing, or quality control) and how thorough the evaluation needs to be. Objective and reliable assessment of many display characteristics can be performed with relatively inexpensive equipment, So, we made 'AAPM TG18 guiding instrument' to ues variable purpose of the evaluation of 'geometrical distortions(quantitative"', 'veiling glare(visual)' and 'sensor calibration'. The spatial measurements for the quantitative evaluation of geometric distortions, and the measurement of the veling-glare ring response function which provides information regarding the spatial extent of the luminance spread, can be performed using the TG18 guiding instrument can be used to sensor calibration to standardize the basic rate of 0% luminance when periodic calibration.

• Management & Information Systems Review
• /
• v.32 no.1
• /
• pp.19-41
• /
• 2013

The primary purpose of this study is to identify the influencing factors on the acceptance behavior of user in smartwork. For this purpose, a research model and hypotheses are developed based on relevant literature reviews. The data have been collected from 320 potential users and respondents were employee of Daejeon and Chungnam region. The results of hypotheses testing through covariance structural model analysis are summarized as follows. First, individual innovativeness has positive influence upon perceived ease of use and acceptance intention of smartwork, and self efficacy has positive influence upon perceived ease of use. Second, subjective norm of social influence has positive influence upon perceived ease of use and image has positive influence upon perceived ease of use and perceived usefulness. Third, number of exception of task characteristics has positive influence upon perceived ease of use and autonomy has positive influence upon perceived usefulness. Lastly, perceived ease of use has positive effect on the perceived usefulness and acceptance intention, and perceived usefulness positively related to acceptance intention in smartwork. Based on the findings, this study ends with theoretical and practical implications, as well as limitations and future research directions.