• Journal of the Korean Wood Science and Technology
• /
• 제32권3호
• /
• pp.33-41
• /
• 2004

In ancient wooden structures, the mechanical properties of the structural members have been reduced by time-dependent degradations such as fatigue or creep. Also, the external and internal deterioration was caused by environmental condition, fungi, bacteria, or insect, and then reduced the quality of structural members. However, the previous methods for evaluating the deterioration have been mainly depended on the visual inspection. In this study, therefore, ultrasonic stress wave test, accelerometer stress wave test were used to evaluate the deterioration of structural wood members in ancient wooden structures. Based on the results, the quantitative criteria of stress wave transmitted velocity were proposed to evaluate the deterioration of structural member. The proposed criteria were related to the degree of deterioration. In accelerometer stress wave, the criteria of deterioration of wave reciprocal velocity was below 1800 ㎲/m at incipient deterioration (below 12% ratio of deterioration), between 1800 and 2200 ㎲/m at moderate deterioration (12~17%) and above 2200 ㎲/m at severe deterioration (above 17%). The ultrasonic stress wave, the criteria of deterioration were 800 and 950 ㎲/m at below 8% and above 15% of the degree of deterioration respectively.

• 한국안전학회지
• /
• 제17권2호
• /
• pp.58-62
• /
• 2002

Longitudinal wave tests with finite elastic medium were performed to investigate the difference between measured values and theoretical values of propagation velocity and elasticity modulus. Each accelerometer was attached on finite elastic medium with same phase and different positions to check the particle motion. The results show that measured values of elasticity moduli from both time domain and frequency domain were similiar to theoretical value. Polarity of signal depends entirely on the phase of accelerometer. It proved that the propagation velocity and the particle motion are in the same direction when a compressive stress is applied. And also the propagation velocity and the particle motion depend on the intensity of the stress and material properties respectively.

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.773-778
• /
• 2011

포신과 같은 충격하중을 받는 파이프 형태의 구조물 진동을 측정하기 위해 가속계가 널리 사용된다. 포약의 폭발로 인해 발생하는 응력파는 포신의 횡진동에 미미한 영향을 미치지만 매우 큰 가속도 성분을 가지고 있어 미세 진동의 계측을 어렵게 한다. 기계적 필터는 가속도계를 부착하는 기계적 구조물과 진동감쇠재료로 구성되어, 고주파의 응력파를 제거하고 횡진동에 관련된 가속도 성분만을 가속도계로 전달하는 역할을 한다. 진동감쇠재료는 비선형성이 강하여 수학적 모델링이나 수치적 해석에 어려움이 있다. 본 논문에서는 9 가지의 진동감쇠재료의 진동특성을 실험적으로 확인하여, 기계적 필터에 가장 적합한 재료를 선택하였다. 또한, 압착에 따른 진동특성의 변화를 통해, 기계적 필터의 설계 데이터를 얻을 수 있었다. 기계적 필터를 설계 제작하여, 필터의 성능을 확인하였다.