Determination of Ratio of Wood Deterioration Using NDT Technique

  • Lee, Jun-Jae (College of Agriculture & Life Science, Seoul National University) ;
  • Bae, Mun-Sung (College of Agriculture & Life Science, Seoul National University)
  • Received : 2003.09.15
  • Accepted : 2003.11.12
  • Published : 2004.05.25

Abstract

In ancient wooden structures, the mechanical properties of the structural members have been reduced by time-dependent degradations such as fatigue or creep. Also, the external and internal deterioration was caused by environmental condition, fungi, bacteria, or insect, and then reduced the quality of structural members. However, the previous methods for evaluating the deterioration have been mainly depended on the visual inspection. In this study, therefore, ultrasonic stress wave test, accelerometer stress wave test were used to evaluate the deterioration of structural wood members in ancient wooden structures. Based on the results, the quantitative criteria of stress wave transmitted velocity were proposed to evaluate the deterioration of structural member. The proposed criteria were related to the degree of deterioration. In accelerometer stress wave, the criteria of deterioration of wave reciprocal velocity was below 1800 ㎲/m at incipient deterioration (below 12% ratio of deterioration), between 1800 and 2200 ㎲/m at moderate deterioration (12~17%) and above 2200 ㎲/m at severe deterioration (above 17%). The ultrasonic stress wave, the criteria of deterioration were 800 and 950 ㎲/m at below 8% and above 15% of the degree of deterioration respectively.

Keywords

Acknowledgement

This work was financially supported by a grant No. R01-2002-1046 from the Basic Research Program of the Korea Science & Engineering Foundation and M. S. Bae is grateful for the graduate fellowship provided through the Ministry of Education through Brain Korea 21 Project.