• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2024

Concrete, as a porous construction material, permits chloride penetration from outside, which yields corrosion in embedded steel. In the study, an accelerated corrosion technique (ICM: Impressed current method) was adopted for rapid corrosion formation with 10 Volt of potential, and corrosion amou nt was controlled u p to 10.0 %. Corrosion amou nt had a linear relationship with cumulative corrosion current and increased with a quadratic function of accelerating period due to cracking. Regarding bond strength test, OPC concrete showed rapid drop of bond strength over 3.0 % of corrosion weight ratio, however slag concrete with 30 % replacement ratio showed a level of 51.4~71.6 % of corrosion ratio to OPC concrete with keeping residual bond strength.

• Journal of Microbiology and Biotechnology
• /
• v.34 no.4
• /
• pp.846-853
• /
• 2024

Adzuki bean (Vigna angularis), which provides plant-based proteins and functional substances, requires a long soaking time during processing, which limits its usefulness to industries and consumers. To improve this, ultrasonic treatment using high pressure and shear force was judged to be an appropriate pretreatment method. This study aimed to determine the optimal conditions of ultrasound treatment for the improved hydration of adzuki beans using the response surface methodology (RSM). Independent variables chosen to regulate the hydration process of the adzuki beans were the soaking time (2-14 h, X₁), treatment intensity (150-750 W, X₂), and treatment time (1-10 min, X₃). Dependent variables chosen to assess the differences in the beans post-immersion were moisture content, water activity, and hardness. The optimal conditions for treatment deduced through RSM were a soaking time of 12.9 h, treatment intensity of 600 W, and treatment time of 8.65 min. In this optimal condition, the values predicted for the dependent variables were a moisture content of 58.32%, water activity of 0.9979 a_w, and hardness of 14.63 N. Upon experimentation, the results obtained were a moisture content of 58.28 ± 0.56%, water activity of 0.9885 ± 0.0040 a_w, and hardness of 13.01 ± 2.82 g, confirming results similar to the predicted values. Proper ultrasound treatment caused cracks in the hilum, which greatly affects the water absorption of adzuki beans, accelerating the rate of hydration. These results are expected to help determine economically efficient processing conditions for specific purposes, in addition to solving industrial problems associated with the low hydration rate of adzuki beans.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.2
• /
• pp.62-70
• /
• 2010

A feasibility test for accelerating composting of sewage sludge irradiated with electron beam(3kGy) was investigated. Dried wood chip and leaves were used as a bulking agent and carbon source, respectively. The test variables included changes in temperature, organics and nutrients, and bioactivities from experimental and control composters. Results indicates that the temperature rose up to $60^{\circ}C$ within 1 day and maintained high temperature above $50^{\circ}C$ for more than 5 days in the irradiated sludge cake composter. It resulted in the fast degradation of organics during the initial 5 days, showing that approximately 70% of total amount of carbon degraded within 20 days was destroyed. It is likely that the composting of electron beam irradiated sludge cake is able to reduce it's maturing period significantly.

• Korean Journal of Food Science and Technology
• /
• v.12 no.4
• /
• pp.254-262
• /
• 1980

A series of experiment were carried out to separate the factor accelerating the lysis of cell wall of $Saccharomyces\;sak{\acute{e}}$ from the preparation of crude zymolyase obtained from Arthrobacter luteus. An attempt was also made to purify the enzyme which is essential for the study on the separation of the factor. The results are summarized as follows: 1. Crude zymolyase was fractionated 5 peaks $(A{\sim}E)$ containing three peaks $(A{\sim}C)$ passed through the column by the chromatography on Biogel CM-30. 2. Among the five peaks, peak E (protease fraction) was found to contain the factor accelerating the lytic activity of the zymolyase. 3. L-c fraction purified in almost free form from the nonlytic ${\beta}-1$, 3-glucanase, protease and inert protein by the affinity adsorption chromatography with Sephadex G-75 gel was obtained from zymolyase fraction (peak D). When it was subjected to polyacrylamide gel disc electrophoresis, only one clear protein band was observed at pH 4. 5, but still detected two or more band at pH 8. 3.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1235-1237
• /
• 2002

Insulation system(200 class} for stator coil is designed for traction motor with VVVF inverter. Sample coils for stator of the traction motor were tested by accelerative thermal degradation which composed of heat, vibration, moisture, and overvoltage apply. Reliability and expected life were evaluated on the insulation system for 200 class traction motor. After aging of 10 cycles, tan ${\delta}$ increased with voltage. This result is due to increase of internal defects and change of insulation structure.

• Journal of Korea Foundry Society
• /
• v.24 no.4
• /
• pp.202-208
• /
• 2004

Effects of Co addition on sliding wear properties of multi-component white cast iron were investigated. The microstructures of multi-component white cast iron containing from 0%Co to 10%Co exhibited little difference. However, the hardness increased with an increase of the Co content. Increasing the Co content, wear properties were improved and the iron oxide on worn surface was increased in the low sliding speed range of the steady-state wear region. Hence, Co addition was effective to improve the wear properties of multi-component white cast iron by accelerating the corrosive wear as well as the enhancement effect of hardness.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1916-1919
• /
• 2007

We have been setting up experiments on propagation of shock waves generated by the pulsed laser ablation. One side of a thin metal foil is subjected to laser ablation as a shock wave propagates through the foil. The shock wave, which penetrates through the foil is reflected by an acoustic impedance which causes the metal foil to high-strain rate deform. This short time physics is captured on an ICCD camera. The focus of our research is applying shock wave and deformation of the thin foil from the ablation to accelerating micro-particles to a very high speed.

• Korean Journal of Materials Research
• /
• v.14 no.3
• /
• pp.186-190
• /
• 2004

An electron beam microcolumn composed of an electron emitter, micro lenses, scan deflector, and focus lenses have been fabricated and tested in the STEM mode. In this paper, we report a technique of precisely aligning the electron lenses by the laser diffraction patterns instead of the conventional alignment method based on aligner and STM. STEM images of a standard Cu-grid were observed using a fabricated microcolumn under both the retarding and accelerating modes.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1558-1560
• /
• 2004

Liquid-immersed pole transformers have utilized an insulation system consisting of natural cellulose-based materials and mineral oil for many years. If the transformers are installed with the abruptly changing load over limitation, its insulation materials are apt to unexpected aging with high temperature. Therefore we have been conscious of developing a transformer that is more thermally stable then conventional types. To measure temperature distribution in the winding of conventional and newly designed transformers, temperature sensors were installed fordirect reading of oil and conductor temperatures at transformers. And we conducted accelerating aging test for these transformers. The measuring data had made use of the design to hybrid insulation system. Also we could find the possibility of this insulation system to apply in pole mounted transformers.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1413-1416
• /
• 1995

Plasma Display(PDP) was successfully demonstrated on 30-60inch display panel. Research for mass production is also been accelerating. The basic study of PDP are mainly focused on understanding of micro discharge in each cell In this paper, DC PDP with Ag electrode is made and the discharge charcateristics in micro gap is studied with the variation of the distance of electrode gap and the pressure in discharge cell.