• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 추계학술발표논문집
• /
• pp.243-245
• /
• 2002

ABS(Acrylonitrile Butadiene Styrene) 수지는 낮은 비중과 전기전도도, 가공성 등 우수한 물리적 성질을 갖는다. ABS 수지 제조방법인 Conventional process와 이를 개선한 MmSH(Momentary mold Surface Heating) injection process로 제조하여 나타나는 도금의 최적 조건을 연구하였다. 탈지, 에칭, Neutralization, Catalyzing, Accelerating의 전처리 과정을 거쳐 pH 변화에 따른 무전해 Ni 도금을 실시한 결과 각 수지 모두 pH7 이상에서 도금속도와 밀착력이 증가하였으나 MmSH injection process로 제작된 ABS 수지보다 Coventional process에서 제작된 ABS 수지의 밀착력이 우수한 경향이 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.135-136
• /
• 2008

In the paper, we evaluated insulation evaluation of EPDM insulator used often in power distribution lines in Korea. The selected samples for our experiment were three EPDM insulators for 22.9[kV] operated for 10 years or less. Using these samples, we observed the discharge pattern through accelerating experimental and analyzed discharge quantity using fractal theory. The validity of our fractal method were discussed and life time. reliability and quantitative analysis of the insulator was conducted through the method.

• 한국조명전기설비학회지:조명전기설비
• /
• 제2권1호
• /
• pp.83-89
• /
• 1988

본 논문에서는 기존 고층주택단지를 대상으로 승강기가 전부하 상태로 상승할 때 실제로 전동기의 인입간선에 흐르는 최대전류, 즉 가속전류와 이로인해 생기는 전압강하를 실제분석했다. 이 결과에서 나타난 승강기의 가속전류 오용범위는 그 전동기의 규격전류에 대해 5.5㎾가 380%이하, 7.5㎾는 350%이하 11㎾는 330%이하이며, 간선의 전압강하는 5% 이내로 유지되고 있음을 알 수 있었다.

• 한국관개배수논문집
• /
• 제4권2호
• /
• pp.38-47
• /
• 1997

In the final stage of seadike closing, the flow in the tidal gap changes rapidly to high accelerating flow, causing losses of construction materials. As the tidal velocity through the gap of an end dump contraction is highly nonuniform, flow equations on

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.403-406
• /
• 2011

Here we report Airy beams coupled with waveguide modes. These waveguide Airy (WAiry) beams propagate through layered planar structures inheriting the characteristics of waveguide modes as well as those of Airy beams, such as diffraction-free and accelerating features. In particular, we focus on the WAiry beams associated with backward waveguide modes, showing that the backward feature can alter the trajectories of the WAiry beams significantly. Based on this, we propose a new scheme of waveguide-type polarization/power beam splitters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1058-1062
• /
• 1993

A fuzzy reasoning method is proposed for the implementation of control systems based on non-fuzzy microprocessors. The essence of the proposed method is to search the local active miles instead of the global rule base. Thus the reasoning is conveniently performed on a master cell as a fuzzy accelerating kernel, which is transformed from an active fuzzy cell. The interpolative reasoning is simplified via adopting the algebraic product of fulfillment for the conditional connective AND and the weighted average for the rule sentence connective ALSO.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.647-652
• /
• 1994

In the previous paper, we presented a new guidance law for a missile during boost phase. Thus, this paper deals with the guidance law for a missile after the thrust cutoff against an accelerating and turning target. It is essentially based on the concept of proportional navigation. Some simulation studies were performed using a three dimensional mathematical model of an air-to-air missile and the effectiveness of the guidance law presented was shown.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.39-42
• /
• 2003

We studied the vertical launch performance of the Laser-driven In-Tube Accelerator (LITA). This device is primarily characterized by accelerating a projectile in a tube. Owing to the confinement effect, the thrust performance is enhanced. The driver gas can be specified and its pressure be turned so that the impulse performance is optimized. In the experiments, a 3.0-gram projectile was vertically launched. The effects of the projectile exit condition, the laser beam incident direction and the driver gas species were experimentally studied.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.927-930
• /
• 2013

We developed an electroplating process of cobalt nanowires of which line-widths were between 70 and 200 nm. The plating electrolyte was made of $CoSO_4$ and an organic additive, dimethyldithiocarbamic acid ester sodium salt (DAESA). DAESA in plating electrolytes had an accelerating effect and reduced the surface roughness of plated cobalt thin films. We obtained void-free cobalt nanowires when the plating current density was 6.25 mA/$cm^2$ and DAESA concentration was 1 mL/L.

• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.889-894
• /
• 1996

This study was subjected to the stabilization of heavy metals using DSp cement. Heavy metal Cr and Pb ions were mixed with cement paste and hydration behavior and leaching property by heavy metal were exami-ned. It was found that, Cr ion accelerated the early hydration of the cement and has no accelerating effect in later hydration period. However Pb ion retarded the hydration of the cement for a early hydration periods. As a result of leaching test the quantity of leachant has a very low value and the influence of leached heavy metal effected on the environments is very weak.