• Journal of Veterinary Clinics
• /
• v.35 no.5
• /
• pp.229-232
• /
• 2018

A 9-year-old intact female Poodle (weighing 3.6 kg) was presented for the treatment of a partial and full thickness burn that covering 45% of body including bilateral thigh and sacrolumbar region. Autologous platelet-rich plasma (PRP) stimulates angiogenesis, promoting vascular in-growth and fibroblast proliferation. On the unrecovered right thigh of the dog, autologous PRP was injected into the lesion after application of micro-needles. For macroscopic evaluation digital, photographs were taken from wounds at days 0, 3, 5, 13, 21, and 28. On the $3^{rd}$ day after PRP application, epithelialization was accelerated. Application of autologous PRP accelerated wound-healing rate and healing time in full thickness burns as well as secondary complications originating from unrecovered wounds. The delayed lesion was completely healed on the $28^{th}$ day by autologous PRP treatment. In human, PRP was increasingly used in the treatment of a variety of soft tissue in the management of chronic non-healing wounds. This study has shown that PRP treatment can be a valuable and effective aid on intractable wound healing in the dog with burns.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.56-62
• /
• 2006

This paper describes the MMIC product qualification of the Ka band satellite transponder for the COMS(Communication, Ocean and Meteorological Satellite). Ka-band active equipment for the COMS communications transponder are being developed by using 12 kinds of MMICs which include low noise amplifiers, medium power amplifiers, frequency mixers, frequency multipliers, RF switch, and HEMT attenuator MMIC, Those MMICs had been fabricated at the MMIC production foundry of northrop Grumman Space Technology (Velocium) which is qualified for space application, and experienced in various space programs during past decades. For the MMIC product qualification, Visual inspection and SEM inspection had been performed, and burn-in test for 240 hours and accelerated life-test for 1000 hours had been done on test fixtures of individual MMIC products at $125^{\circ}C$. Additionally, infrared temperature scanning and finite element simulation were performed to analyze and confirm the channel temperature of semiconductor devices on several representatives of those MMIC products that os one of the most important factors in performance degradation and life reduction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.1
• /
• pp.81-88
• /
• 1999

A fibrin adhesive have been widely used in oral and maxillofacial surgery for microvascular anastomosis, autogenous chip bone grafts, many kinds of soft tissue surgery (vestibuloplasty, bleeding control after extraction, primary healing by covering of suture of a gum after the extirpation of large cysts). There are two principal components in adhesive systems biologically: lyophilized human fibrinogen and bovine thrombin. The fibrinogen component contains coagulation factor XIII and enhance the initial wound healing, which polymerizes soluble fibrin monomers into an insoluble clot. The thrombin is dissolved in a solution of calcium chloride to provide the second component. We applied fibrin adhesive, Beriplast (Behring, Behringwerke AG, D-3350, Marburg, FRD), to 4 patients for fixation of free skin grafting donors who had facial scar around eye, nose, mouth corner which received from accidents, or burn. We have experienced initial accelerated graft fixation between donor and recipient sites with no additional fixation. And It's made easy bleeding control and easy manipulation during operation. But two cases showed partial hypertrophic scar engrowth in above 3 months follow up, but no significant. Histopathological reviews in general were showed similar scar findings such as abundant collagen bundles in H&E, M/T stain, but slight positive signs in elastic and collagen antibody immunopathologic findings in hypertrophic scar cases.

• Journal of Surface Science and Engineering
• /
• v.49 no.4
• /
• pp.389-394
• /
• 2016

The operation method of nuclear power plants is currently changing to high burn-up and long period that can enhance economics and efficiency of the plant. Since nuclear plant operation environment has been becoming severe, the amount of absorbed hydrogen also has increased. Absorbed hydrogen can be fatal securing safety of nuclear fuel cladding in case of Loss of Coolant Accidents(LOCA). In order to examine the impact of hydride on high-temperature oxidation, high-temperature oxidation experiment was performed on normal Zry-4 cladding and on Zry-4 cladding where hydrogen is charged in air pressure steam atmosphere under the $950^{\circ}C$ and $1000^{\circ}C$. According to the results, while oxidation acceleration due to charged hydrogen was not observed prior to breakaway oxidation creation, oxidation began to accelerate in cladding where hydrogens charged as soon as the breakaway oxidation started. If so much hydrogen are charged in the cladding, equiaxial monoclinic phase to unstable of stress is formed and it is presumed that oxidation is accelerated because nearby stress caused a crack in equiaxial phase, and that makes corrosion resistance decline sharply.

• Carbon letters
• /
• v.4 no.4
• /
• pp.168-174
• /
• 2003

Silver nitrate ($AgNO_3$) powder was mixed into a reformed pitch precursor. Then, the silver-containing pitch was melt spun to form round and "C" shape fibers. A wire mesh was inserted prior to the nozzle to improve the spinnability of the silvercontaining precursor pitch. Silver particles in the carbon fibers (CFs) were detected by XRD and TEM. These tests showed that silver particles were uniformly distributed and the total amount of silver remained constant during stabilization and carbonization. Next, the silver-containing CFs were activated by steam diluted in nitrogen gas. Silver particles accelerated the activation rate, but the specific surface areas of the silver-containing ACFs were similar to those of non-silver containing ACFs at the same burn-off levels. The specific surface area of the C-shaped activated carbon fibers was larger than that of the round activated carbon fibers. The likely reason is that the surface area of a C-shaped CF is about two times larger than that of a round CF when equivalent cross-sectional areas are compared. A small amount of silver particles in the periphery of the CFs was removed during the activation, but the remainder of silver was stayed within the ACFs.

• Journal of Environmental Science International
• /
• v.19 no.5
• /
• pp.543-548
• /
• 2010

This research was made to investigate the effects of burned, which is made in the early spring every year at Saebyeol-Oreum from 2003 to 2009, on changes in vegetation on the grassland. The results of analyzing the characteristics of the lay of the land showed that the proportion of the surface land that had the angle of azimuth and the angle of slope in the range of southeast $135^{\circ}{\sim}180^{\circ}$ accounting for 73.89% and $21^{\circ}{\sim}30^{\circ}$ accounting 58.33% of the entire surface land, respectively, was found to be highest. The results of the analysis showed that the relative importance value was found to be lowered from 27.07 in 2003 to 19.47 in 2009, and this can be attributable to the relative importance value of Artemisia japonica having been heightened from 7.07 in 2003 to 16.23 in 2009. The reason that the relative importance value of Artemisia japonica was found to be high is thought to be that vegetation on the surface land was removed by burned in the early spring and, due to this, the dry surface of soil and the high slope accelerated the soil erosion and could not provide proper environment of the growth and development for Imperata cylindrical and Miscanthus sinensis, so Imperata cylindrical and Miscanthus sinensis were excluded and Artemisia japonica whose importance value had been highest have flourished. Researches to maintain the current vegetation on the burned location of Saebyeol-Oreum and to adjust physical characteristics of soil to restore vegetation and the proper time and cycle of burned should be conducted.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.4
• /
• pp.192-205
• /
• 2009

The unexpected wind over the Mt. Hwawang on 9 February 2009 was deadly when many spectators were watching a traditional event to burn dried grasses and the fire went out of control due to the wind. We analyzed the fatal wind based on wind flow simulations over a digitized complex terrain of the mountain with a localized heating area using a three dimensional computational fluid dynamics model, CFD_NIMR_SNU (Computational Fluid Dynamics_National Institute of Meteorological Research_Seoul National University). Three levels of fire intensity were simulated: no fire, $300^{\circ}C$ and $600^{\circ}C$ of surface temperature at the site on fire. The surface heat accelerated vertical wind speed by as much as $0.7\;m\;s^{-1}$ (for $300^{\circ}C$) and $1.1\;m\;s^{-1}$ (for $600^{\circ}C$) at the center of the fire. Turbulent kinetic energy was increased by the heat itself and by the increased mechanical force, which in turn was generated by the thermal convection. The heating together with the complex terrain and strong boundary wind induced the unexpected high wind conditions with turbulence at the mountain. The CFD_NIMR_SNU model provided valuable analysis data to understand the consequences of the fatal mountain fire. It is suggested that the place of fire was calm at the time of the fire setting due to the elevated terrain of the windward side. The suppression of wind was easily reversed when there was fire, which caused updraft of hot air by the fire and the strong boundary wind. The strong boundary wind in conjunction with the fire event caused the strong turbulence, resulting in many fire casualties. The model can be utilized in turbulence forecasting over a small area due to surface fire in conjunction with a mesoscale weather model to help fire prevention at the field.