• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1715-1719
• /
• 2007

New bispsoralen derivatives 5-10, 8-MOP-NHCO(CH2)nCONH-8-MOP (BPSBA-Cn, n = 0, 1, 2, 3, 4 and 5) in which 5 position of an 8-methoxypsoralen (8-MOP) is linked by various lengths of bisamide polymethylene chain to 5 position of the other 8-MOP, have been synthesized by the amidation of 5-amino-8-methoxypsoralen (12) with α,ω-alkanoyl dichloride. Photophysical properties of their derivatives including π?π stacking interaction between the two aromatic moieties were investigated by UV absorption and fluorescence emission spectra. Efficient ring-ring stacking interactions have been observed in BPSBA-C4 (9) from the percent hypochromism (%H) of the models.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.1
• /
• pp.91-98
• /
• 1991

Electrical conductivity of poly (3-alkylthiophene) derivatives with substituted long alkyl chain such as poly (3-butylthiophene), poly (3-hexylthiophene), poly (3-octylthiophene), poly (3-decylthiophene), poly (3-dodecylthiophene), and poly (3-docosylthiophene) increases with increasing temperature. However, after attaining a maxiumum value, it decreases with further temperature increase. Hysteresis is also observed in the temperature dependence of conductivity and absorption spectra. The absorption spectra also changes rapidly at the phase transition. These phenomena are discussed in terms of the increase of the energy band gap in the liquid states due to the decrease of co-planarity of thiophene rings accompanied by remarkable conformation changes.

• Textile Coloration and Finishing
• /
• v.13 no.5
• /
• pp.306-311
• /
• 2001

Natural colorants haute attracted much attention all over the world because of their non-hazardous nature. The world is becoming increasingly aware of environmental Issues, such as ozone layer depletion, water pollution and waste disposal problems. The use of synthetic dyestuffs for their synthesis and application in the dyeing industries has been criticized due to introduction of contaminants into the environment. This has led to the desire to turn to the traditional, and more natural way of life. In this study, the colorants of extract of Ginkgo biloba bark were analysed and their dyeing properties on silk, wool and cotton were studied. It was found that uv-visible absorption spectra of extract of Ginkgo biloba bark showed two strong absorption Peaks in the range of 240 ∼400 In. From the result of IR spectra, the major ingredient of extract of Gikgo biloba bark seems to be the flavon which is one of the flavonoid derivatives. Silk, wool, and cotton dyed with the extract of Ginkgo biloba bark showed a reddish yellow color. Their color differences were increased drastically with repetition of dyeing by three times.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.277-280
• /
• 1997

It is important to investigate the molecular arrangement and the orientational distribution in the study of LB films. Polarized UV/visible absorption spectra make it possible to reveal the molecular arrangement and the orientational distribution. It is clarified that the PAAS LB films have specific directions in the molecular arrangement and the orientational distribution, which art different in intensity corresponding to the surface pressure. Unpolarized UV/visible absorption spectra reveal that the surface pressure is proportional to the finn thickness and is related to the molecular orientation. Current-Voltage(I-V) measurements provide that the current decreases as the surface pressure increases and there are certain phenomena called switching phenomena. Switching effort indicates that the current flows in high conductivity during on-state and suddenly decreases into low conductivity during off-state.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1510-1513
• /
• 2005

The luminescent properties of $Eu^{3+}$ and $Sm^{3+}$ doped potassium tungstate phosphor were investigated. The $K_{4-3x}(WO_4)_2:Eu_x$, $Sm_y$ phosphor was produced by firing the mixed precursors, followed by re-firing with a flux. The re-firing process provided the clean surface to the particles. The excitation spectra showed that the strong absorption in the region of ultra violet light occurred due to the high europium doping concentration. The incorporation of europium to potassium tungstate was easier, compared to other host materials. The excitation spectra could be controlled by the small addition of samarium. The increase of energy absorption around 405nm was assigned to the $Sm^{3+}$ ions. The comparison between real x-ray diffraction and simulated one revealed that the crystal structure of $K_{4-3x}(WO_4)_2:Eu_x,Sm_y$ phosphor is monoclinic with a space group, C2/c.

• Journal of the Korean Ceramic Society
• /
• v.23 no.3
• /
• pp.94-98
• /
• 1986

Infrared has been used in determination of water in magnesium metaphosphate glasses. The method consisted of measuring the weight loss and the variation in absorption coefficient at 3, 200$cm^{-1}$. The molar absorptivity of water in magnesium metaphophate glasses was found to 76.9ι$mol^{-1} cm^{-1}$ Using the value for $\varepsilon$, A and Δ$\upsilon$H of the hydroxyl band in the spectra of magnesium metaphosphate. The molar absorptivity of the hydroxyl absorption band at 3, 3130-2, $925cm^{-1}$ in the spectra of MgO.$P_2O_5$ system glasses could be computed. And a variation of molar absorptivity against the MgO/P2O5 ratio has not been shown regulation.

• Journal of the Korean Ceramic Society
• /
• v.37 no.9
• /
• pp.900-908
• /
• 2000

일반적인 유리용융과 열처리법을 이용하여 많은 양의 금속구리 미립자가 분산된 Zinc Phosphate 유리를 제조하였다. 금속산화물로는 Cu$_2$O를, 환원제로는 SnO를 사용하였다. XRD와 전자회절로부터 열처리에 의해 금속구리의 결정상이 석출됨을 알 수 있었고, TEM에 의해 석출상의 크기는 수~20nm 정도임을 알 수 있었다. 또한 570nm에서의 광흡수 피크로부터도 금속구리의 석출을 확인할 수 있었다. 석출입자의 크기와 흡광은 석출을 위한 열처리 온도와 시간이 증가함에 따라 증가하였다. XPS 스펙트럼으로는 구리의 산화상태 중 Cu$^{2+}$ 이온의 상태만을 분명히 할 수 있었다. 매질유리의 BO/NBO의 비는 열처리 전후 크게 변화가 없었으며, 열처리 후 Cu$^{2+}$ 이온이 다소 감소되는 경향을 보였다.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.1337-1340
• /
• 2009

Electrical properties of a fluorinated carbon black (CB)-filled high-density polyethylene (HDPE) polymeric switch were investigated as a function of fluorination pressure at 0.1 ~ 0.4 MPa. From the FT-IR results, the absorption spectra of the fluorinated CB show an absorption band at 1400 ~ 1000 $cm^{-1}\;for\;{\nu}_{C-F}$ and the peak intensity increased with increasing fluorination pressure. Also, the analysis of XPS spectra of the fluorinated CB indicated that fluorine content increased with increasing fluorination pressure. Meanwhile, the surface free energy of the fluorinated CB decreased with increasing fluorination pressure. Consequently, the increase of fluorine contents of CB made a disappearance of negative temperature coefficient (NTC) behavior of the polymeric switch, which was probably due to the reduction of CB reaggregation after melting point of the HDPE, resulted from the decreasing of London dispersive component of the surface free energy for CB particles.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.475-478
• /
• 2000

Maxwell displacement current(MDC) was generated when the area per molecule was about 140${\AA}$$^2$and 100${\AA}$$^2$. MDC were investigated in connection with monolayer compression cycles. It was found that the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles. The absorption spectra of polyamic acid containing p-methoxyazobenzene in a mixture of N,N-dimethylacetamide(DMAc) and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. The precursor LB film was heated in a vacuum dry oven at 120$^{\circ}C$ in order to convert it into the LB film of polyimide. The absorption spectra of LB films were also induced photoisomerization by UV and visible light irradiation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.125-130
• /
• 2003

TiO$_2$ nanoparticles were prepared by photochemical synthesis in the dry toluene. The shape and size of the amorphous TiO$_2$ nanoparticles were investigated by transmission electron microscope. The particle size was varied by the contents of the titanium (IV) isopropoxide in dry toluene. Especially networked TiO$_2$ particles were formed from 40% titanium (IV) isopropoxide solution. The optical absorption spectra, photoluminescence, and PL excitation spectra of TiO$_2$ in dry toluene were obtained. The were shifted to the short wavelength as the contents of TiO$_2$ were increased. PL excitation had the peak at the wavelength regions is which the absorption increased steeply.