• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1723-1726
• /
• 2008

In recent years, there has been a remarkable progress in the development of the fiber optic sensors for the detection of various chemicals. Fiber optic sensors have the advantages of very small size, flexibility and low cost. The fiber optic sensors employing different optical or spectroscopic phenomena have been reported such as bulk absorption, optical reflectance, fluoresces and energy transfer. In this study, the effect of nanoparticle concentration in liquid upon light absorption and scattering was studied using extrinsic fiber optic method. For the evaluation, we used Red (650 nm) and Blue (430 nm) light sources which are coupled through the standard cuvette using optical fiber to detector. The experiments are carried out with Polystyrene latex (400 - 800 nm), and Silicon (35 - 110 nm) nanoparticles suspended in Isopropanol. Differences in light absorption and scattering depending on nanoparticle concentration and type are discussed. This method may be useful to study nanoparticles properties for various application and research.

• YAKHAK HOEJI
• /
• v.46 no.4
• /
• pp.226-230
• /
• 2002

The Coptis Rhizome is known for containing a number of isoquinoline type alkaloids. Berberine, coptisine and palmatine are the major constituents of alkaloids. The alkaloids were isolated and determined by forming complex from Coptis japonica (Ranunculaceae). For the determination of these alkaloids, a new spectrophotometric method was developed with a simple and selective sample clean-up using thiocyanatocobaltate[II] complex ion. The absorbance of alkaloidal complex in l,2-dichloroethane solution was measured at 625 nm. A calibration curve for the alkaloids isolated from Coptis Rhizome was linear over the concentration range of 0.2-0.3 mg/mι. The method proved to be rapid, simple and reliable for the isolation and the determination of the alkaloids in Coptis Rhizome.

• KSBB Journal
• /
• v.5 no.2
• /
• pp.191-194
• /
• 1990

Tyrosine is a monohydrolic aromatic amino acid and DOPA is a tyrosine derivative containing dihydroxy group. DOPA can be synthesized from tyrosine by enzymatic reaction. The separation and quantitative determination of each component are very difficult in the reaction mixture. In the present study, two wavelengths giving maximum absorbance difference of each amino acid were determined using UV/VIS spectrophotometer by wavelength scanning and simple assay method was developed for the analysis of the reaction mixture of tyrosine and DOPA by measuring absorbances of reaction mixture. This method can be simply used for the analysis of the tyrosine and DOPA mixture because it does not require and procedure for the pretreatment of the reaction mixture.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.352-354
• /
• 1999

The spectrophotometric determination of Cu(Ⅱ) with α-(2-benzimidazolyl)-α',α"-(N-5-nitro-2-pyridylhydrazone)-toluene has been investigated. The optimum conditions of pH, stability, concentration of ligand and surfactant were evaluated. This method is a simple and sensitive method for determination of Cu(Ⅱ) and offers a selective separation of Cu(Ⅱ) from sample solution containin- I ppm below amount of Ni(Ⅱ), Co(Ⅱ), Zn(Ⅱ) and Sn(Ⅱ). Copper was determined by measuring the absorbance of Cu(Ⅱ)-BINPHT complex extracted with benzene in Brij 58 surfactant at 410 nm. Beer's law is obeyed over the concentration range 0∼2.5 μgmL-1 and the detection limit (S/N=2) is 0.06 μgmL-1. The relative standard deviation at the 0.3 μgmL-1 is 2.4% (N=7). The method was applied for the determination of Cu(Ⅱ) in various milks.

• Journal of the Korean Applied Science and Technology
• /
• v.5 no.1
• /
• pp.25-30
• /
• 1988

In order to develope the method of quantitative determination of lipid hydroperoxide in human blood serum, we tried the ferrothiocyanate method to total lipids extracted by Bligh-Dyer method and obtained the results as follows. 1. The maximum absorbance showed at the concentration of Mohr's solution, 0.127M at pH 1.70 and ammonium thiocyanate solution, 3.95M in the ferrothiocyanate method. 2. When hydrogen peroxide, cumene hydroperoxide, and oxidized linoleic acid were added to serum, and extracted them by Bligh-Dyer method to examine the extraction efficiency, we confirmed that cumene hydroperoxide and oxidized linoleic acid were extracted in $CHCI_3$ phase, and hydrogen peroxide in $MeOH-H_2O$ phase, respectively. 3. The concentration of lipid hydroperoxide of total lipids extracted from normal adult serum was $2.0{\times}10^{-5}M$, and increased proportionally the concentration of lipid hydroperoxide by increasing the amount of serum. 4. When we compared the total lipids extracted by Bligh-Dyer method and total lipids extracted after lipoprotein is precipitated by Yagi method in human blood serum, the concentration of lipid hydroperoxide was showed nearly the same value. From our results, we concluded that the concentration of lipid hydroperoxide in human blood serum could be determined quantitatively by ferrothiocyanate method.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.4
• /
• pp.276-281
• /
• 2013

This study was conducted to compare the contents of ginsenoside according the water extract conditions of red ginseng. In method A, red ginseng extract was prepared at $75^{\circ}C$ for 18 hours by 1 time extraction, and method B, the preparation was done at $85^{\circ}C$ for 18 hours by 1 time extraction. In method C, the primary extract prepared at $75^{\circ}C$ for 9 hours was blended with the secondary extract prepared by re-extracting the red ginseng residue obtained after the primary extraction, at $85^{\circ}C$ for 9 hours. Method D was the same procedure as method C but the extraction temperature for the primary extraction was $85^{\circ}C$ and that for the secondary extraction was $95^{\circ}C$. The contents of total and $Rb_1$, $Rg_1$ and $Rg_3$ ginsenoside were highest in Method C. The content of prosapogenin (ginsenoside $Rg_2$, $Rg_3$, $Rb_1$ and $Rb_2$) was highest in Method B. There was no consistent tendency in Brix, pH, Hue value and absorbance among extraction methods.

• Toxicological Research
• /
• v.30 no.1
• /
• pp.7-11
• /
• 2014

Malondialdehyde (MDA), used as an oxidative stress marker, is commonly assayed by measuring the thiobarbituric acid reactive substances (TBARS) using HPLC, as an indicator of the MDA concentration. Since the HPLC method, though highly specific, is time-consuming and expensive, usually it is not suitable for the rapid test in large-scale environmental epidemiologic surveys. The purpose of this study is to develop a simple and rapid method for estimating TBARS levels by using a multiple regression equation that includes TBARS levels measured with a microplate reader as an independent variable. Twelve hour urine samples were obtained from 715 subjects. The concentration of TBARS was measured at three different wavelengths (fluorescence: ${\lambda}-_{ex}$ 530 nm and ${\lambda}-_{em}$ 550 nm; ${\lambda}-_{ex}$ 515 nm and ${\lambda}-_{em}$ 553 nm; and absorbance: 532 nm) using microplate reader as well as HPLC. 500 samples were used to develop a regression equation, and the remaining 215 samples were used to evaluate the validity of the regression analysis. The induced multiple regression equation is as follows: TBARS level (${\mu}M$) = -0.282 + 1.830 ${\times}$ (TBARS level measured with a microplate reader at the fluorescence wavelengths ${\lambda}-_{ex}$ 530 nm and ${\lambda}-_{em}$ 550 nm, ${\mu}M$) -0.685 ${\times}$ (TBARS level measured with a microplate reader at the fluorescence wavelengths ${\lambda}-_{ex}$ 515 nm and ${\lambda}-_{em}$ 553 nm, ${\mu}M$) + 0.035 ${\times}$ (TBARS level measured with a microplate reader at the absorbance wavelength 532 nm, ${\mu}M$). The estimated TBARS levels showed a better correlation with, and are closer to, the corresponding TBARS levels measured by HPLC compared to the values obtained by the microplate method. The TBARS estimation method reported here is simple and rapid, and that is generally in concordance with HPLC measurements. This method might be a useful tool for monitoring of urinary TBARS level in environmental epidemiologic surveys with large sample sizes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.1008-1011
• /
• 2010

A method currently used to determine soil organic matter (SOM), Tyurin method, is time consuming and expensive while accurate. Recently, a spectrophotometric determination was reported to be rapid, accurate, stable, easy to execute, and amendable to field use for soil samples obtained from Texas, USA. The objective of this study was to test if the spectrophotometric method is applicable to soils in Korea. Soil organic matter was extracted by 1 M HCl followed by a 0.25 M NaOH-0.1 M sodium pyrophosphate solution at a ratio of 1:250 soil:extractant. Soil organic matter determined by Tyurin method was linearly related to the value based on absorbance at 300 nm of the soil extracts with a coefficient of determination ($r^2$) of 0.81. Therefore, the result imply that this spectrophotometric method can be used to determine the soil organic matter of agricultural soils in Korea.

• Journal of Korean Society of Water and Wastewater
• /
• v.36 no.3
• /
• pp.177-186
• /
• 2022

In this study, newly improved Ferron assay test haved on timed spectrometry was used for the determination of hyolrolytic Al species presented in PACl coagulant. The color development reagent ferron was prepared by using conventional method and two newly developed methods. Then the ferron assay test was used to compare and analyze the distribution of Al(III) hydrolyzed species presented in the prepared PACl and alum. The preparing method of reagent A required an aging period of 7 days by adding a hydroxylamine hydroxide and a 1,10-phenanthroline monohydrate reagent, whereas the preparing method of reagent B was used as a coloring agent immediately without aging time. The regression analysis between UV absorbance and Al concentrations of conventional method and newly developed method of ferron reagents in low-concentration aluminum solutions and high-concentration aluminum solutions, showed the correlation coefficients of 0.999 or higher, as showing high correlations of conventional method and newly developed method. Applying Ferron assay test, Al species in the PACls and alum were classified as Ala(monomeric Al), Alb (polymeric Al), and Alc (colloidal and precipitated Al). Distribution of Al(III) hydrolyzed species according to the preparation of ferron colorimetric reagents was similar.

• YAKHAK HOEJI
• /
• v.42 no.3
• /
• pp.243-247
• /
• 1998

A method for the determination of basic drugs based on their reaction with picric acid to form an ion-association complex extractable into several plasticizers was developed. Ba sic drugs-picric acid complexes in acid medium could be extracted quantitatively into several plasticizers except phosphates. For example, the chlorpromazine-picric acid complex showed maximum absorbance at near 410nm and was applied to extraction spectrophotometric determination of chlorpromazine. The calibration curves are linear (r>0.998) within a range from $10^{-6}to\;5{\times}10^{-4}M$ and the precision of the method was acceptable because RSD was less than 2.6% (n=7). The factors affecting the extraction system was discussed.