• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.148-159
• /
• 1998

Spot welding palys a key role in increasing productivity and weight reduction of the final products. This paper proposes a systematic approach on the design of spot weld configuration, dealing with the requried number and location of spot weld joints under the given design parameters, such as the applied loads, lap area, and individual spot weld strength. The optimal design of a spot-welded joint is postulated as a state when the safety factors of all spot weld points (i) are evenly distributed and (ii) reach maximum value. A CAD program is developed to arrange the optimal location of each spot weld based on the derived objective function and constraints. The CAD tool integrates the optimization procedure with Finite Element Analysis (FEA) code through an interface. The interface automatically provides geometrical data and mesh configuration for different spot weld locations to FEA model. It also extracts the transmitted load of each spot weld from the FEA code, and allows the optimization code predict an improved arrangement of spot weld locations. The feasibility of the developed approach is demonstrated by the selected examples.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.471-478
• /
• 2002

In real structures, multi-spot welded joints are more frequently used than a single-spot welded joint. Most researches, however, have been focused to a single-spot welded joint until now. In this paper, the fatigue behavior of multi-spot welded joints are investigated using the finite element solutions of the multi-spot welded specimens. The local strain approach is used rather than the stress intensity factor approach to estimate the fatigue life since the former is quite simple and straightforward. It is found that the fatigue behavior of multi-spot welded joints is different from that of single-spot welded joints. The local strain approach is still applicable to multi-spot welded joints.

• 한국정보컨버전스학회논문지
• /
• 제7권2호
• /
• pp.59-65
• /
• 2014

grassfire 스팟매칭 알고리즘은 중심 스팟을 기준으로 이웃 스팟들의 패턴 유사도에 따라 스팟을 매칭하는 알고리즘으로 잔디에 붙는 불이 사방으로 번져가는 방식을 이용한 grassfire 알고리즘을 이다. 씨드 스팟쌍은 매칭이 정확하게 확인된 스팟쌍으로써 매칭이 시작되는 발화점이며 이것으로부터 스팟매칭이 시작된다. grassfire 스팟매칭 알고리즘에서는 스팟매칭을 시작하는 발화점이 필요한데 기존 grassfire 스팟매칭 알고리즘에서는 한 개의 발화점을 이용하였다. 본 논문에서는 grassfire 알고리즘의 스팟매칭의 성능을 높이기 위하여 한 개의 발화점이 아닌 다중의 발화점을 선정하는 방법을 제안한다. 다중 발화점을 이용한 grassifre 알고리즘은 여러 개의 발화점을 선정한 후 개별 발화점으로부터 스팟매칭을 수행하고 결과들을 계산한다. 제안된 알고리즘은 한 개의 씨드스팟을 이용한 방법보다 스팟 검출율과 스팻매칭 정확도의 측면에서 좋은 성능을 보인다.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.38-51
• /
• 2000

The study on the mechanical behavior of a spot-welded specimen is largely divided into the quasi-static overload failure analysis and the fatigue failure prediction. The main issue in an overload analysis is to examine the critical loads, thereby providing a generalized overload failure criterion. As the welding spot forms a singular geometry of an external crack type, fatigue failure of spot-welded specimens can be evaluated by means of a fracture parameter. In this study, we first present the limit loads of 4 representative types of single spot-welded specimens in terms of the base metal yield strength and specimen geometries. Recasting the load vs. fatigue life relationships experimentally, obtained here, we then predict the fatigue life of spot-weld specimens with a single parameter denoted the equivalent stress intensity factor. This crack driving parameter is demonstrated to successfully describe the effects of specimen geometry and loading type in a comprehensive manner. The suggested fatigue life formula for a single spot weld can play a key, role in the design and assessment of spot-welded panel structures, in that the fatigue strength of multi-spots is eventually determined by the fatigue strength of each single spot.

• Applied Biological Chemistry
• /
• 제17권2호
• /
• pp.125-137
• /
• 1974

Selenomonas ruminantium 균체(菌體)를 TCA로 가열(加熱) 분해(分解)한 후 chloroform : methanol (1 : 3)로 추출(抽出)한 당지질(糖脂質)을 분리(分離)하고 이 당지질(糖脂質)을 acetone가용부분(可溶部分) spot A화합물(化合物)과 acetone불용부분(不溶部分)에서 ether로 다시 가용부분(可溶部分)을 추출(抽出)한 spot B화합물(化合物)의 두 부분(部分)으로 분리(分離)하고 이 두 화합물(化合物)에 대(對)하여 각각(各各) 그 화학구조(化學構造)를 구명(究明)하며 당지질(糖脂質)의 구조(構造)를 추정(推定)한 바 다음과 같은 결과(結果)를 얻었다. 1. 두 화합물(化合物)의 적외선흡수분석결과(赤外線吸收分析結果) spot A는 amino당(糖)에 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)하였으며 spot B는 amino당(糖)에 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)하고 인(燐)을 함유(含有)하고 있음을 알았다. 2. 두 화합물(化合物)을 GLC에 의(依)하여 지방산조성(脂肪酸組成)을 조사(調査)한 바 spot A.B화합물중(化合物中)에 있는 O-acyl 및 N-acyl 지방산(脂肪酸)은 ${\beta}-OH\;C_{13:0}$지방산(脂肪酸)이 대부분(大部分)이 였는데 저급(低級)의 hydroxy지방산(脂肪酸) ${\beta}-OH\;C_{9:0}$도 특이적(特異的)으로 함유(含有)되여 있음을 알았다. 3. 두 화합물(化合物)을 hydrazine분해(分解)를 시킨 결과(結果)를 paper chromatography로 조사(調査)한 바 spot A화합물(化合物)은 glucosamine 이 2분자(分子) 결합(結合)하여 있는 chitobiose와 같은 Rf 치(値)를 나타냈음으로 2분자(分子)의 glucosamine이 결합(結合)됨을 확인(確認)하고 spot B 화합물(化合物)의 낮은 Rf치(値)는 glucosamine에 인(燐)이 결합(結合)되여 있음을 알았다. 4. spotA화합물(化合物)의 산분해물(酸分解物)을 다시 ninbydrine으로 산화분해(酸化分解) 시키면 arabinose만이 생기는 것으로 보아 glucosamine의 amino기(基)는 $C_2$의 위치(位置)에 결합(結合)하여 있음을 알았다. 5. N-acetyl화(化)한 spot A에 $NaBH_4$를 추리(處理)한 결과(結果) glucosamine의 전량(全量)이 반감(半減)하는 것으로 보아 2분자(分子)의 glucosamine이 결합(結合)되여 있는 것을 알 수 있고 Morgan-Elson반응(反應) 및 $NaIO_4$분해(分解)에 의(依)하여 2개(個)의 glucosamine은 1.6결합(結合)임을 확인(確認)하였다. 6. N-acetyl화(化)한 spot A.B화합물(化合物)에 ${\beta}-N-acetyl$ glucosarninidase를 반응(反應)시킨 결과(結果) spot A화합물(化合物)은 100% N-acetyl glucosamine으로 분해(分解)되고 spot B화합물(化合物)은 분해(分解)되지 않았으므로 spot A화합물(化合物)만이 ${\beta}$결합(結合)을 하고 있음을 알았다. 7. $^{32}P$함유(含有) spot B화합물(化合物)에 phosphodiesterase 및 phosphomonoesterase를 작용(作用)시킨 결과(結果) phosphodiesterase는 반응(反應)치 않고 phosphomonoesterase에 의(依)하여 100% $^{32}P$가 유리(遊離)되는 것으로 보아 glucosamine 2분자(分子)에 한계의 인(燐)이 monoester결합(結合)을 하고 있음을 알 수 있다. 8. spot A화합물(化合物)은 glucosaminiyl ${\beta}-1.6-glucosamine$의 결합(結合)을 하였고 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)되여 있으며 주지방산(主脂肪酸)은 ${\beta}-OH\;C_{13:0}$임을 알았다. 9. spot B화합물(化合物)도 glucosaminyl ${\beta}-1.6-glucosamine$의 결합(結合)을 하고 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)되여 있으며 주지방산(主脂肪酸)은 ${\beta}-OH\;C_{13:0}$이나 인(燐)이 monoester결합(結合)을 하고 있는 것이 spot A화합물(化合物)과 특이(特異)함을 알았다.

• 한국식물병리학회지
• /
• 제11권3호
• /
• pp.197-209
• /
• 1995

This paper is a third report about the new fungal diseases of economic resource plants in Korea. It contains short descriptions on symptoms, occurrence conditions, pathogen, and some phytopathological notes for each of 10 fungal plant diseases. They are angular leaf spot of Achyranthes japonica by Cercospora achyranthis causing leaf spot and defoliation in the shade of plants, leaf spot of Armoracia lapathifolia by Cercospora armoraciae causing leaf spot to blight from the rainy season to autumn, hypophyllous mold of Dioscorea tokoro by Distocercospora pachyderma causing leaf spot and yellowing, hypophyllous mold of Artemisia spp.by Mycovellosiella ferruginea causing leaf spot and yellowing, angular leaf spot of Aralia elata by Pseudocercospora araliae causing velvety leaf spot and defoliation, hypophyllous mold of Lycium chinense by Pseudocercospora chengtuensis causing velvety leaf spot and defoliation from the rainy season to autumn, angular leaf spot of Diospyros lotus by Pseudocercospora disospyri-morrisianae causing leaf spot and defoliation from summer to autumn, brown leaf spot of Impatiens textori by Pseudocercospora nojimae causing leaf spot to blight from the rainy season, leaf spot of Cephalonoplos segetum by Ramularia cirsii causing leaf spot to blight throughout the growing season, and white mold of Leonurus sibiricus by Ramularia leonuri causing leaf spot to blight mostly in autumn.

• 소성∙가공
• /
• 제23권5호
• /
• pp.282-288
• /
• 2014

It is difficult to control welding variables during spot welding of non-ferrous metals like aluminum because of the low electrical resistance of the material. It has been suggested that a solid state welding process such as friction stir spot welding or extru-spot welding can be used to spot weld aluminum plates. In the extru-spot welding, there is a need to increase the weld strength by improving the shape of the welding die. The current study shows that the weld strength for an extru-spot welding can be increased by using a pin placed on the inside of the upper electrode in the welding die. In the current study, the deformed shape of the insert rivet and the stress distribution in the welding zone were analyzed by simulation. Extru-rivet spot welding experiments were performed by changing the height of pin on the inside of the upper electrode. From the experimental result, it is shown that the weld strength for an extru-rivet spot welding can be increased by adjusting the height of the pin. The optimal shape of the deformed rivet after the extru-rivet spot welding can be observed from the simulation results. The deformed shape of the insert rivet can also be controlled by the height of pin.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1065-1070
• /
• 2003

In arc spot welding process, the arc is not moving and heat input is concentrated in one spot so that the heat input efficiency of arc is higher than that of GMAW. In other words, the heat input efficiency of arc change during weld time because arc start is done in spot and weld metal is filled. Therefore, the heat input model of arc spot welding should be different from that of general GMAW. In present study, the calculating model of heat input efficiency in arc spot welding was suggested by temperature monitoring near spot in arc spot welding of copper plate. The result showed that the heat input efficiency of arc was changed three times during weld time. The accuracy of calculating method of heat input efficiency was verified by heat transfer analysis of arc spot welding process using finite element method.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.554-561
• /
• 1998

Vehicle body structures are formed by thousands of spot welds and fatigue failure of vehicle structures occur near the spot welds after driving a long way at a durability test road. It is necessary to know accurately the reason of the fatigue failure of the spot weld in the developing stage in order to reinforce it. Many investigations have been done regarding the strength of spot welded joints, contributing to understand its fatigue strength. In developing process, a fatigue failed spot welded area can be repaired by $CO_2$ welding or another method to continue the test. To know the effect of reinforcing these welds, several methods of welding were analyzed and compared to spot welding. With the results of this test, the appropriate repair method can be used instead of spot welding during the development of new car and best design guide can be given for the strength. In this study, fatigue and static tensile tests are made and microstructure is investigated for the purpose of estimating the strength of welded joints by using spot welded and $CO_2$ plug welded specimens. The tested specimens are of two types : Tensile-shear type(TS) and L-tension type(LT).

• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.41-49
• /
• 1997

Laser spot welding offers a unique combination of high speed. precision and low heat distortion, compared with conventional resistance spot welding. This combinatin of advantages is especially attractive for the automotive industry. Until now automobile fabrication is widely used resistance spot welding, however, because of geometric and structural problem, spot welding is required many welding machine in that reason by substituting spot welding with laser welding, it save the equipment cost. In the present study we measured ultimate strength and observed bead cross section of laser welded specimen and compared with that of the resistance spot welding results in order to adapt laser welding in automobile industry. Also for strength esti- mation we calculated the residual stress of laser welded zone. All calculations are performed with the ABAQUS code on a workstation.