• 한국해안·해양공학회논문집
• /
• 제29권6호
• /
• pp.410-418
• /
• 2017

저마루구조물의 안정성 및 배후 호안의 월파량은 배후수역의 수위에 영향을 받음에도 단면 수리모형실험 수행 시 수위상승량이 알려지지 않아 계측 결과가 왜곡될 수 있다. 본 연구에서는 저마루 구조물 제체 배후면의 평균수위 상승량을 예측하기 위해 단면수리모형실험과 해수유동수치모형실험을 수위-유량 관계식으로 결합하는 결합기법을 시도하였다. 이 기법을 사용함으로써 평균수위 상승량과 유속장을 단면수리모형실험과 동시간대에 얻을 수 있어 이러한 문제점들을 상당한 수준으로 해소할 수 있게 되었다. 또한 구조물의 개구부를 통한 유출유속의 강도에 관해서도 개략적인 정보를 얻을 수 있어 저마루구조물의 적정 평면배치안 선정에도 도움이 될 수 있다.

• 태양에너지
• /
• 제17권1호
• /
• pp.35-46
• /
• 1997

In this study comparison of experiment results with the computed results of linear theory and nonlinear theory using singularity method was obtainable. Specially singularity points like sources and vortexes on hydrofoil and freestreamline were distributed to analyze two dimensional flow field of supercavitating cascade using nonlinear theory, and governing equations of flow field were derived and hydraulic characteristics of cascade were calculated by numerical analysis of the governing equations. The results compared linear theory and nonlinear theory with the experiment results of the study are as follows: The tolerances of nonlinear theory were larger than those of linear theory in case of ${\alpha}<10^{\circ}$. Moreover the computational range of attack angles could be expanded from ${\alpha}=10^{\circ}$ to ${\alpha}=25^{\circ}$, the flow field of supercavitating cascade could be analyzed in the condition which the wake thickness and the length of cavity are a variable. The shapes of cavity were changed sensitively according to various variable such as attack angles, pitches and wake thickness, and the pressure distribution of hydrofoil surface was identical almost disregarding wake thickness but changed largely according to attack angle and the length of cavity. Lift coefficient and drag coefficient were reduced according to increasing of wake thickness but the influences of wake thickness were very little in the situation of small pitch and long cavity.

• 한국유체기계학회 논문집
• /
• 제6권4호
• /
• pp.50-57
• /
• 2003

The hydraulic performance analysis of a turbopump with an inducer for a liquid rocket engine was performed using three-dimensional Navier-Stokes equations. A simple mixing-plane method and a full interaction method were used to simulate inducer/impeller interaction. Two methods show almost similar results due to the weak interaction between the inducer and impeller since the inducer outlet blade angle is lather small. But, when the inducer and the impeller are closely spaced near the shroud region, flow angles at the impeller inlet show different results between two methods. Thus, the full interaction method predicts about $2\%$ higher pump performance than the mixing-plane method. And the effects of prewhirl at the impeller inlet are also investigated. As the inlet flow angle is increased, the head rise and the efficiency are decreased. The computational results are compared with measured ones. The computational results at the design point show good agreements with experimental data, however under-predicts the head rise at high mass flow rates compared to the experiment.

• 터널과지하공간
• /
• 제33권3호
• /
• pp.189-207
• /
• 2023

In the present study, the thermoshearing experiment on a rough rock fracture were modeled using a three-dimensional grain-based distinct element model (GBDEM). The experiment was conducted by the Korea Institute of Construction Technology to investigate the progressive shear failure of fracture under the influence of thermal stress in a critical stress state. The numerical model employs an assembly of multiple polyhedral grains and their interfaces to represent the rock sample, and calculates the coupled thermo-mechanical behavior of the grains (blocks) and the interfaces (contacts) using 3DEC, a DEM code. The primary focus was on simulating the temperature evolution, generation of thermal stress, and shear and normal displacements of the fracture. Two fracture models, namely the mated fracture model and the unmated fracture model, were constructed based on the degree of surface matedness, and their respective behaviors were compared and analyzed. By leveraging the advantage of the DEM, the contact area between the fracture surfaces was continuously monitored during the simulation, enabling an examination of its influence on shear behavior. The numerical results demonstrated distinct differences depending on the degree of the surface matedness at the initial stage. In the mated fracture model, where the surfaces were in almost full contact, the characteristic stages of peak stress and residual stress commonly observed in shear behavior of natural rock joints were reasonably replicated, despite exhibiting discrepancies with the experimental results. The analysis of contact area variation over time confirmed that our numerical model effectively simulated the abrupt normal dilation and shear slip, stress softening phenomenon, and transition to the residual state that occur during the peak stress stage. The unmated fracture model, which closely resembled the experimental specimen, showed qualitative agreement with the experimental observations, including heat transfer characteristics, the progressive shear failure process induced by heating, and the increase in thermal stress. However, there were some mismatches between the numerical and experimental results regarding the onset of fracture slip and the magnitudes of fracture stress and displacement. This research was conducted as part of DECOVALEX-2023 Task G, and we expect the numerical model to be enhanced through continued collaboration with other research teams and validated in further studies.

• Wind and Structures
• /
• 제23권6호
• /
• pp.505-521
• /
• 2016

The objective of this study is to investigate numerically the effect of building roof shaps on wind flow and pollutant dispersion in a street canyon with one row of trees of pore volume, $P_{vol}=96%$. A three-dimensional computational fluid dynamics (CFD) model is used to evaluate air flow and pollutant dispersion within an urban street canyon using Reynolds-averaged Navier-Stokes (RANS) equations and the Explicit Algebraic Reynolds Stress Models (EARSM) based on k-${\varepsilon}$ turbulence model to close the equation system. The numerical model is performed with ANSYS-CFX code. Vehicle emissions were simulated as double line sources along the street. The numerical model was validated by the wind tunnel experiment results. Having established this, the wind flow and pollutant dispersion in urban street canyons (with six roof shapes buildings) are simulated. The numerical simulation results agree reasonably with the wind tunnel data. The results obtained in this work, indicate that the flow in 3D domain is more complicated; this complexity is increased with the presence of trees and variability of the roof shapes. The results also indicated that the largest pollutant concentration level for two walls (leeward and windward wall) is observed with the upwind wedge-shaped roof. But the smallest pollutant concentration level is observed with the dome roof-shaped.

• International Journal of Concrete Structures and Materials
• /
• 제10권4호
• /
• pp.479-497
• /
• 2016

Many experimental studies have evaluated the in-plane behavior of reinforced concrete frames in order to understand mechanisms that resist progressive collapse. The effects of transverse beams, frames and slabs often are neglected due to their probable complexities. In the present study, an experimental and numerical assessment is performed to investigate the effects of transverse beams on the collapse behavior of reinforced concrete frames. Tests were undertaken on a 3/10-scale reinforced concrete sub-assemblage, consisting of a double-span beam and two end columns within the frame plane connected to a transverse frame at the middle joint. The specimen was placed under a monotonic vertical load to simulate the progressive collapse of the frame. Alternative load paths, mechanism of formation and development of cracks and major resistance mechanisms were compared with a two-dimensional scaled specimen without a transverse beam. The results demonstrate a general enhancement in resistance mechanisms with a considerable emphasis on the flexural capacity of the transverse beam. Additionally, the role of the transverse beam in restraining the rotation of the middle joint was evident, which in turn leads to more ductile behavior. A macro-model was also developed to further investigate progressive collapse in three dimensions. Along with the validated numerical model, a parametric study was undertaken to investigate the effects of the removed column location and beam section details on the progressive collapse behavior.

• Wind and Structures
• /
• 제15권6호
• /
• pp.481-494
• /
• 2012

The greenhouse type metal structures are increasingly used in modern construction of livestock farms because they are less laborious to construct and they provide a more favorable microclimate for the growth of animals compared to conventional livestock structures. A key stress factor for metal structures is the wind. The external pressure coefficient ($c_{pe}$) is used for the calculation of the wind effect on the structures. A high pressure coefficient value leads to an increase of the construction weight and subsequently to an increase in the construction cost. The EC1 in conjunction with EN 13031-1:2001, which is specialized for greenhouses, gives values for this coefficient. This value must satisfy two requirements: the safety of the structure and a reduced construction cost. In this paper, the Navier - Stokes and continuity equations are solved numerically with the finite element method (Galerkin Method) in order to simulate the two dimensional, incompressible, viscous air flow over the vaulted roofs of single span and twin-span with eaves livestock greenhouses' structures, with a height of 4.5 meters and with length of span of 9.6 and 14 m. The simulation was carried out in a wind tunnel. The numerical results of pressure coefficients, as well as, the distribution of them are presented and compared with data from Eurocodes for wind actions (EC1, EN 13031-1:2001). The results of the numerical experiment were close to the values given by the Eurocodes mainly on the leeward area of the roof while on the windward area a further segmentation is suggested.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.267-267
• /
• 2019

Driftwood is one of serious problems in a river environment. In several countries, such as Indonesia, Japan, and Italy, the driftwood frequently appears in a river basin, and it can alter the channel bed, flow configuration by wood deposition and jam formation. Therefore, the studies related to driftwood have been actively conducted by many researchers to understand the mechanism of driftwood dynamics. In particular, wood motion by collision is one of the difficult issues in the numerical simulation because the calculation for wood collision requires significantly expensive calculation time due to small time step. Thus, this study conducted the numerical simulation in consideration of the wood motion by water flow and wood collision to understand the wood dynamics in terms of computation. We used the 2D (two-dimensional) depth-averaged velocity model, Nays2DH, which is a Eulerian model to calculate the water flow on the generalized coordinate. A Lagrangian type driftwood model, which expresses the driftwood as connected sphere shape particles, was employed to Nays2DH. In addition, the present study considered root wad effect by using larger diameter for a particle at a head of driftwood. An anisotropic bed friction was considered for the sliding motion dependent on stemwise, streamwise and motion directions. We particularly considered changeable draft at each particle and projection area by an angle between stemwise and flow directions to precisely reproduce the wood motions. The simulation results were compared with experimental results to verify the model. As a result, the simulation results showed good agreement with experimental results. Through this study, it would be expected that this model is a useful tool to predict the driftwood effect in the river flow.

• 한국해안·해양공학회논문집
• /
• 제33권6호
• /
• pp.383-390
• /
• 2021

해안분야 실험은 복잡하며, 여러 요소들을 고려해야 한다. 성공적인 수행에는 경험이 중요한 요소가 되기도 하며, 조파기 및 계측기의 성능향상 등으로 지속적으로 발달되어 왔다. 수리실험은 구조물의 안정성 및 해안수리학적 특성 검토 분야에서 수치실험에 비해 직관적인 관찰이 가능하다는 장점이 있다. 그러나 모형축척, 실험시설 및 장비와 실험 수행자의 판단 등에 의해 서로 다른 결과가 도출될 수도 있다. 본 연구에서는 수리실험에 있어 가장 기본이면서 중요한 실험파(불규칙파) 설정을 위한 지침을 제안하기 위해 2차원 실험을 수행하였다. 실험을 통하여 주파수 스펙트럼을 활용한 불규칙파의 설정방법 및 입사파고의 범위[(H_S)_M/(H_S)_T = 1~1.05]에 대하여 제시하였다. 제안된 실험파 설정 지침은 실험결과의 신뢰도 향상에 기여할 수 있기를 기대한다.

• 한국화재소방학회논문지
• /
• 제27권6호
• /
• pp.64-69
• /
• 2013

본 연구에서는 엔진 나셀 화재를 모사하고 이전의 실험결과를 보충하기위해 이차원 둔각물체 주위의 반응유동장에 대하여 수치해석을 수행하였다. Direct numerical simulation (DNS) 기반의 fire dynamic simulator (FDS)를 이용하여 반응유동장의 특성을 조사하였고, 실험결과와의 비교를 통해 화학반응식을 결정하였다. 산화제는 공기를 사용하였고, 연료는 메탄을 사용하였다. 동축류와 대향류 분사 모두의 경우에 화염의 안정성이나 모양은 둔각물체 주위의 와 강도와 크기에 크게 영향을 받았다. 동축류 분사의 경우 계산에 통한 화염소화한계를 결정하였는데 연료유속이 커질수록 공기의 유속 또한 커지는 경향이 있었고, 그 속도들 또한 기존의 실험결과와 잘 일치함을 볼 수 있었다. 유동장 특성에 대한 화학반응의 효과를 고찰하기 위해 반응이 없는 경우를 계산하여 비교하였다. 모든 경우에 비반응 유동장에 비해 반응 유동장의 후류와는 크기도 감소하고 세기도 감소함을 볼 수 있었는데 이는 반응에 의한 후류의 온도증가가 유체의 밀도 및 모멘텀을 감소시켰기 때문으로 판단된다.