• Journal of Korean Society of Transportation
• /
• v.30 no.3
• /
• pp.17-30
• /
• 2012

This study analyzes the basic characteristics needed for motivating modal shift from truck to rail. The object of the study is to consider the resistance factor for container transported inland and the object point is the transfer node where modal shift occurs. The main contents of the study are as follows. First, the study looks at what shippers, engaged in inland transport of container, think of current transfer node environment. From this, the study analyzes what resistance factors are attributable to the lack of motivation in modal shift from truck to rail. Second, the study estimates mode choice models in which the resistance factors at transfer node are applied. Also by using this, the study draws out elasticities, and analyzes characteristics of resistantance factors in modal shift. Third, as its result, the study suggests methods to promote modal-shifting container transport from truck to rail.

• Journal of Powder Materials
• /
• v.26 no.1
• /
• pp.11-15
• /
• 2019

In this study, a method to remove residual powder on a multi-layered graphene and a new approach to transfer multi-layered graphene at once are studied. A graphene one-step transfer (GOST) method is conducted to minimize the residual powder comparison with a layer-by-layer transfer. Furthermore, a residual powder removing process is investigated to remove residual powder at the top of a multi-layered graphene. After residual powder is removed, the sheet resistance of graphene is decreased from 393 to 340 Ohm/sq in a four-layered graphene. In addition, transmittance slightly increases after residual powder is removed from the top of the multi-layered graphene. Optical and atomic-force microscopy images are used to analyze the graphene surface, and the Ra value is reduced from 5.2 to 3.7 nm following residual powder removal. Therefore, GOST and residual powder removal resolve the limited application of graphene electrodes due to residual powder.

• The Journal of the Korean Society for Microbiology
• /
• v.19 no.1
• /
• pp.25-33
• /
• 1984

One hundred and forty strains of Shigella cultures isolated from the twelve hygiene laboratories of cities and provincial level and general hospital laboratories in 1983, and were tested for their resistance to 13 antimicrobial drugs and their R-Plasmid transfer. One hundred and forty (100%) of isolates were susceptible to amikacin, gentamicin, tobramycin, a total of 94.3% of all shigella isolates were resistant to 1 or more of the 13 antimicrobial agents tested. The most commonly found resistance was to chloramphenicol (94%), followed by streptomycin (93%), tetracycline (92%), piperacillin (90%), ampicillin (83%), cefoperazone (42%), nalidixic acid (14%), cephalothin (17%), rifampicin (22%), and kanamycin (6%). Sixty percent of strains among 140 were resistant to ampicillin, chloramphenicol, streptomycin, tetracycline at same time. The transfer of drug resistance by conjugation was tested and 94 strains (94.3%) which were resistant to one or more drugs were found to transfer their drug resistance to E. coli.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.2
• /
• pp.155-165
• /
• 1994

In this study, the following factors are investigated from experiments for a vertical parallel plate heat exchanger under the frosting condition ; the growth of frost layer, the characteristics of heat and mass transfer, the change of mass flow rate of the air passing through the heat exchanger, and the pressure drop of the air in the heat exchanger. The amount of heat and mass flux of water vapor transferred from the air stream to the heat exchanger surface is large at the early stage of frosting and then decreases dramatically, and the extent of decreasing rate becomes moderate with time. The frost layer formed near the inlet of the heat exchanger is thicker and denser than that formed near the outlet. It is found that the gradient of the amount of frost along the flow direction increases with time. In the early period of frost formation, the thermal resistance between the air and the cooling plate increases dramatically and then the extent of change decreases with time. Initially the convective thermal resistance is dominant. Then, while the convective thermal resistance decreases with time, the conductive thermal resistance continues to increase with time and finally the conductive thermal resistance becomes dominant.

• Current Optics and Photonics
• /
• v.1 no.1
• /
• pp.7-11
• /
• 2017

In this study, multilayered graphene was easily transferred to the target substrate in one step using thermal release tape. The transmittance of the transferred graphene according to the number of layers was measured using a spectrophotometer. The sheet resistance was measured using a four-point probe system. Graphene formed using this transfer method showed almost the same electrical and optical properties as that formed using the conventional poly (methyl methacrylate) transfer method. This method is suitable for the mass production of graphene because of the short process time and easy large-area transfer. In addition, multilayered graphene can be transferred on various substrates without wetting problem using the one-step dry transfer method. In this work, this easy transfer method was used for dielectric substrates such as glass, paper and polyethylene terephthalate, and a sheet resistance of ~240 ohm/sq was obtained with three-layer graphene. By fabricating organic solar cells, we verified the feasibility of using this method for optoelectronic devices.

• Korean Journal of Microbiology
• /
• v.26 no.3
• /
• pp.181-187
• /
• 1988

Using a Tn5-Mob system, pEA9 was characterized as a self-transmissible plasmid carrying a kanamycin resistance marker. The self-transfer frequencies of pEA9 varied greatly depending on pH values. The transfer frequency was about $4\times 10^{-5}$ at pH 5, that was 10 times higher than one at pH 6.5. With a helper plasmid, transfer frequencies were increased about $10^{4}$ times than the frequencies obtained without it.

• Transactions of Materials Processing
• /
• v.20 no.1
• /
• pp.29-35
• /
• 2011

In the design of the injection molding process, various parameters including mold design parameters and molding conditions should be investigated to improve part quality. The mold temperature is one of important processing parameters that affect the flow characteristics, surface appearance, part deformation, mechanical properties, etc. Numerical analyses have been used to predict the temperature distribution of the mold under the given cooling or heating conditions. However, conventional analyses have been performed by assuming that the mold material is a single solid even though a number of plates are assembled to construct an injection mold. In the present study, a numerical approach considering the thermal contact resistance is proposed to provide more reliable prediction of the mold temperature distribution by reflecting the heat-resistance between assembled mold plates.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.1
• /
• pp.13-25
• /
• 1996

The purpose of this paper is to study heat transfer characteristics of rotating heat pipe with tapered condensers by numerical analysis and experimental method. An experimental investigation has been carried out on thermal resistance between condenser wall and vapor region fo the rotating heat pipe with various taper 0, 1/11.4, 1/38. Heat transfer characteristics by analytical study were applied to describe various Nu numbers on the base of dimensionless condensate film, Re and Pr numbers in both condensers. Comparison between calculated results and experimental data showed qualitatively good agreement and the numerical analysis of this study can be utilized to predict the performance of a rotating heat pipe. The thermal resistance can be decreased by increasing the revolution per minute. Regardless of various dimensionless condensate film, Nu number was largely influenced by saturation temperatures of working fluid.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.414-422
• /
• 2001

Antibiotic resistance in human pathogens is a major public health issue. Some of the resistance problem can be attributed to the transfer of resistant bacteria from animals to people and the transfer of resistance genes from animal pathogens and commensal bacteria to human pathogens. Control measures include improvements in food hygiene to reduce the spread of zoonotic bacteria to people via the food chain. However, to specifically address the issue, the medical profession must control misuse and overuse of antibiotics in hospitals and community practice. In addition, the livestock industries and their advisors must reduce and refine the use of antibiotics in animal production and replace antibiotics with alternative disease control measures as much as possible.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.720-729
• /
• 1996

An analysis of convective boiling heat transfer for refrigerant mixtures is performed for an annular flow to investigate the degradation of the heat transfer rate. Annular flow is selected in this study because a great portion of the evaporator in the refrigeration and air conditioning system is known to be in the annular flow regime. Mass transfer effect due to composition difference between liquid and vapor is included in this analysis, which is considered to be one of driving forces for the mass transfer at the interface. Due to the concentration gradient at the interface the mass transfer is interfered, so is the evaporative heat transfer at the interface. The mass transfer resistance makes the interface temperature slightly higher and, as a result, the heat transfer coefficients decrease compared with those without mass transfer effects. The degradatioin of the heat transfer rate reaches its maximum at a certain composition. The composition difference between vapor core and vapor at the interface has a direct effect on the temperature difference between the vapor core and the interface and the degradation of the heat transfer rate. Correction factor $C_{F}$ for the mixture effects is added to the correlation for pure substances and the flow boiling heat transfer coefficients can be calculated using the modified equation.n.