• Korean Journal of Geomatics
• /
• v.3 no.2
• /
• pp.123-128
• /
• 2004

As the applied fields of GIS are expanded to the transportation, developing internet-based applications for transportation information is getting attention increasingly. Most applications developed so far are primarily focused on guidance systems for owner-driven cars. Although some recent ones are devoted to public transportation systems, they show limitations in dealing with the following aspects: (i) people may change transportation means not only within the same type but also among different modes such as between buses and subways, and (ii) the system should take into account the time taken in transfer from one mode to the other. This study suggest the framework for developing a public transportation guidance system that generates optimized paths in the transportation network of mixed means including buses, subways and other modes. For this study, the Genetic Algorithms are used to find the best routes that take into account transfer time and other service-time constraints.

• Advanced Composite Materials
• /
• v.16 no.3
• /
• pp.207-221
• /
• 2007

The filling process of resin injection/compression molding (I/CM) can be divided into injection and compression phases. During the resin injection the mold is kept only partially closed and thus a gap is present between the reinforcements and the upper mold. The gap results in preferential flow path. After the gap is filled with the resin, the compression action initiates and forces the resin to penetrate into the fiber preform. In the present study, the resin flow in the gap is simplified by using the Stokes approximation, while Darcy's law is used to calculate the flow field in the fiber mats. Results show that most of the injected resins enter into the gap during the injection phase. The resin injection time is extremely short so the duration of the filling process is determined by the final closing action of the mold cavity. Compared with resin transfer molding (RTM), I/CM process can reduce the mold filling time or injection pressure significantly.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.26 no.5
• /
• pp.191-202
• /
• 2022

Markov envelope as a theoretical solution of the parabolic wave equation with Markov approximation for the von Kármán type random medium is studied and approximated with the convolution of two probability density functions (pdf) of normal and gamma distributions considering the previous studies on the applications of Radiative Transfer Theory (RTT) and the analysis results of earthquake records. Through the approximation with gamma pdf, the constant shape parameter of 2 was determined regardless of the source distance r_o. This finding means that the scattering process has the property of an inhomogeneous single-scattering Poisson process, unlike the previous studies, which resulted in a homogeneous multiple-scattering Poisson process. Approximated Markov envelope can be treated as the normalized mean square (MS) envelope for ground acceleration because of the flat source Fourier spectrum. Based on such characteristics, the path duration is estimated from the approximated MS envelope and compared to the empirical formula derived by Boore and Thompson. The results clearly show that the path duration increases proportionately to r_o^1/2-r_o², and the peak value of the RMS envelope is attenuated by exp (-0.0033r_o), excluding the geometrical attenuation. The attenuation slope for r_o≤100 km is quite similar to that of effective attenuation for shallow crustal earthquakes, and it may be difficult to distinguish the contribution of intrinsic attenuation from effective attenuation. Slowly varying dispersive delay, also called the medium effect, represented by regular pdf, governs the path duration for the source distance shorter than 100 km. Moreover, the diffraction term, also called the distance effect because of scattering, fully controls the path duration beyond the source distance of 300 km and has a steep gradient compared to the medium effect. Source distance 100-300 km is a transition range of the path duration governing effect from random medium to distance. This means that the scattering may not be the prime cause of peak attenuation and envelope broadening for the source distance of less than 200 km. Furthermore, it is also shown that normal distribution is appropriate for the probability distribution of phase difference, as asserted in the previous studies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.561-567
• /
• 2010

Recently, several number of Multi-Intermodal Transfer Center are nominated to improve convenience of public transportation user. Due to budget constraints, it should be defined which is the first consideration among the discussed many works. In this circumstance, there are some absurdities in the evaluation of validity of existing methods. Therefore, we suggested the Priority Order Valuation for Multi-Intermodal Transfer Centerer. The evaluation method, we suggested, is considered quantitative analysis and qualitative analysis. In this study, we find out that B/C ratio and construction costs are strongly related to the quantitative analysis so that Multi-Intermodal Transfer Centers in metropolitan area are evaluated the positive results. Therefore, both quantitative analysis and qualitative analysis are applied to the Priority Order, metropolitan area and other area are fairly evaluated the results for the Priority Order.

• Tunnel and Underground Space
• /
• v.29 no.3
• /
• pp.135-147
• /
• 2019

This paper introduced a impact load estimation method by examining vibration transfer path analysis (TPA). The theoretical background and the load quantification procedure are explained, and a case study of hydraulic breaker is reported. We explained the merits and limitations of the load estimation method of TPA, and improvement method was suggested through case analyses of drilling equipment. The necessity of R&D of load-estimation technology was discussed. A new strategy for developing new techniques for impact load measurement was proposed.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.516-525
• /
• 1994

Since the TMI and Chernobyl accidents, many passive safety features are suggested in advanced reactors in order to enhance the safety in future nuclear power plants. In order to verify the effectiveness and provide the data for detailed design of passive cooling system, in the present work, the effects of air inlet position and external condition on the natural circulated air flow rate and the natural and forced convective heat transfer coefficient have been investigated for the one-side heated closed path such as the passive containment cooling system of the Westinghouse's AP-600. A series of experiments have been peformed with the 1/26th scaled segment type test facility of the AP-600 passive containment. Under natural and forced convection, the air velocities and temperatures are measured at several points of the air flow path. The experimental result are compared with a simple one-dimensional model and it shows a good agreement.

• Solar Energy
• /
• v.20 no.3
• /
• pp.11-19
• /
• 2000

In this study, the basic data which were required for development of LHSS(latent heat storage system) were experimentally obtained. Experiments were carried out under the following conditions. The initial temperatures of P.C.M. which were used by parameter is $5^{\circ}C,\;9^{\circ}C$ and $14^{\circ}C$. The conditions of working fluid are $-6^{\circ}C,\;-4^{\circ}C$, and $65{\ell}$/min.. The pure water of which the freezing point is $0^{\circ}C$ was filled in the system, and the Ethylene glycol(brine) was circulated through the 10 vertical tubes as a secondary fluid in order to cool the P.C.M. down. The inlet temperature of the secondary fluid and the initial temperature of the water were varied to investigate the effects of the important design parameters. The phenomenons of temperature conversion of P.C.M. were appeared for the conductive heat transfer and free convective heat transfer by buoyancy force in this storage unit system. In order to find the effective water circulation path, we obtained P.CM. temperature distributions of 5 parts in the storage tank during freezing process.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.4
• /
• pp.105-112
• /
• 2021

This study aims to find empirical evidence of the effect of increasing income on the potential transfer of wealth from manufacturing companies that go public to stakeholders. Earnings management with an accrual approach with the Modified Jones model is an identifier of the availability of earnings management practices, without paying attention to both positive and negative symbols. The interpretation of the results of the discretionary accrual measurement between positive and negative symbols has different meanings. Positive discretionary accruals indicate that management uses income-increasing techniques. Meanwhile, negative discretionary accruals indicate that management uses income-reducing techniques. Income-increasing techniques tend to be viewed as opportunistic behavior of managers. This study used 111 data from manufacturing companies listed on the IDX (Indonesia Stock Exchange) from 2015-2018. Path analysis is used to test the hypothesis. The results of this study are in line with the point of view of management strategy, increasing income is used as a way to transfer potential welfare from the company to stakeholders. Social welfare (tax) and managerial remuneration are proven to be mediators in increasing the effect of increasing income on future company value. Further research can complete the potential welfare transfer against the shareholders related to income-increasing strategy.

• Journal of the Korean housing association
• /
• v.26 no.2
• /
• pp.89-101
• /
• 2015

The purpose of this study is to explore the housing pathways of middle-class married women toward owning a first home. In doing so, an in-depth interview as a qualitative method was conducted, life history was utilized to track down the path to first-home owning, and all the interviews were transcribed for analysis. The research participants were well-educated middle-class full-time housewives owning a home. The findings indicated that family formation through marriage and child birth was a primary driving force to buy a home. It was shown that owning a home was perceived not just as a stepping stone for building both family wealth and social capital but as one of the most important pillars to reinforcing traditional family values. In spite of some intergenerational distinctions on the path toward home owning, commonalities across generations included that home owning was considered to be a social icon for middle-class, it became almost impossible for younger generations without parental support which stimulated the intergenerational transfer of wealth, and it was greatly determined by both family income (affordability) and home finance options(borrowing capacity). This research implies that the changing social landscape transforms the value on homeownership and could undermine the socioeconomic strengths of home owning. Nonetheless, it's of importance to strategically assist first homebuyers who are likely to be a member of middle-class.

• Proceedings of the ESK Conference
• /
• 1992.10a
• /
• pp.54-62
• /
• 1992

This work has been directed at studying and developing a prototype Computer Aided Design(CAD) tool to be used for planning tendon paths in hand reconstructive surgery. The application of CAD to rehabilitative surgery of the hand is a new field of endeavor. There are currently no existing systems designed to assist the orthopedic surgeon in planning these complex peocedures. Additionally, orthopedic surgeons are not trained in mechanics, kinematics, math modeling, or the use of computers. It was also our intent to study the mechanisms and the efficacy of the application of CAD techniques to this important aspect of hand surgery. The following advances are reported here: Interactive 3D tendon path definition tools., Software to calculate tendon excursion from an arbitrary tendon path crossing any number of joints., A model to interactively compute and display the foirces in muscle and tendon., A workstation environment to help surgeons evaluate the consequences of a simulated tendon transfer operation when a tendon is lengthened, rerouted, or reattached in a mew location., It also has been one of the primary concerns in this work that an interactive graphical surgical workstation must present a natural, user-friendly environment to the orthopedic durgeon user. The surgical workstation must ultimately aid the surgeon in helping his patient or in doing his work more efficiently or more reliably.