• 제목/요약/키워드: a transfer path

검색결과 562건 처리시간 0.026초

사용자 맞춤형 대중교통 경로정보제공을 위한 다계층의 다목적 경로탐색기법 연구 (A Multi-Objective Shortest Paths Finding Considering Multi-Class in A Multi-Modal Transit Network for Providing User-Customized Route Information)

  • 이미영;박제진;정점례;박동주
    • 한국ITS학회 논문지
    • /
    • 제7권3호
    • /
    • pp.1-14
    • /
    • 2008
  • 국내는 정보통신(IT) 기술의 발달을 기반으로 BIS, BMS, CNS 등을 통해 교통정보가 실시간적으로 제공되고 있어 유비쿼터스 기반의 첨단 통신기술이 정착되게 되면 개인의 취향에 적합한 맞춤형 (대중)교통정보가 가능할 것으로 전망된다. 대중교통 통행정보는 경로탐색알고리즘으로 구현되는데, 대중교통망은 일반 가로망과는 달리 환승과 운행시간 특성을 포함하며 통행자가 경로를 선택하는 과정에서 통행시간, 환승횟수, 환승시간과 같은 복수의 제약 또는 목적의 고려가 요구된다. 본 연구에서는 사용자에게 영향을 미칠 수 있는 요인들을 복수의 목적으로 고려하여 경로를 탐색하며 탐색된 경로에 대하여 자의적으로 선택해 나가는 기법을 제안한다 본 연구는 복합대중교통망을 대상으로 통행시간, 환승횟수, 환승시간등과 같은 통행목적에 대하여 계층별로 별도의 다목적 경로를 탐색하는 방안을 강구하여 계층별로 적용 가능한 사용자 맞춤형 정보제공체계의 기본적인 접근이론을 개발한다. 제안된 다수단, 다계층, 다목적 경로탐색알고리즘은 링크표지에 근거하여 구축되어 복합교통망에 효율적으로 구동할 수 있으며, 수도권 도시철도의 실제 대규모 교통망에 적용한 사례연구를 통하여 다양한 계층을 고려한 경로계획모형(Path Planning)으로 활용될 수 있는 가능성을 예시하였다.

  • PDF

로드노이즈 성능 예측을 위한 현가장치 하드포인트의 가진력 직접 측정법에 대한 실험적 평가 (Experimental Evaluation of Direct Measurement for Excitation Forces Acting on the Hard-points of Suspension System to Predict Road-noise Performance)

  • 강연준;김희수;송현진;이강덕;김형건
    • 한국소음진동공학회논문집
    • /
    • 제25권3호
    • /
    • pp.184-190
    • /
    • 2015
  • NVH engineering has become a hot issue due to radical technology changes and development in automotive industry since customers' expectations and needs for their vehicle is taken to a higher level. However, the source identification and quantification of the road noise within a vehicle is still not at the level where it needs to be to meet their expectations due to its' complex transfer path and difficulties in path optimization. The primary focus of this research is on direct force obtaining method at suspension hard points using suspension test rig. Directly obtained forces at suspension to body mounting points are critical and crucial for determining the effects of design changes of the suspension has on road noise performance. Direct force obtaining method has its limitation in sensor installation within an actual vehicle therefore, many has been indirectly calculating forces using full matrix inversion method or dynamic stiffness method. In this study, to circumvent this limitation, a suspension rig is used. Then, the suspension rig is verified through a comparative analysis of its dynamic behavior between the actual vehicle by cleat test on chassis dynamometer.

A Modified Delay and Doppler Profiler based ICI Canceling OFDM Receiver for Underwater Multi-path Doppler Channel

  • Catherine Akioya;Shiho Oshiro;Hiromasa Yamada;Tomohisa Wada
    • International Journal of Computer Science & Network Security
    • /
    • 제23권7호
    • /
    • pp.1-8
    • /
    • 2023
  • An Orthogonal Frequency Division Multiplexing (OFDM) based wireless communication system has drawn wide attention for its high transmission rate and high spectrum efficiency in not only radio but also Underwater Acoustic (UWA) applications. Because of the narrow sub-carrier spacing of OFDM, orthogonality between sub-carriers is easily affected by Doppler effect caused by the movement of transmitter or receiver. Previously, Doppler compensation signal processing algorithm for Desired propagation path was proposed. However, other Doppler shifts caused by delayed Undesired signal arriving from different directions cannot be perfectly compensated. Then Receiver Bit Error Rate (BER) is degraded by Inter-Carrier-Interference (ICI) caused in the case of Multi-path Doppler channel. To mitigate the ICI effect, a modified Delay and Doppler Profiler (mDDP), which estimates not only attenuation, relative delay and Doppler shift but also sampling clock shift of each multi-path component, is proposed. Based on the outputs of mDDP, an ICI canceling multi-tap equalizer is also proposed. Computer simulated performances of one-tap equalizer with the conventional Time domain linear interpolated Channel Transfer Function (CTF) estimator, multi-tap equalizer based on mDDP are compared. According to the simulation results, BER improvement has been observed. Especially, in the condition of 16QAM modulation, transmitting vessel speed of 6m/s, two-path multipath channel with direct path and ocean surface reflection path; more than one order of magnitude BER reduction has been observed at CNR=30dB.

수도권 도시철도 역사환승량 추정방안 -교통카드자료를 활용하여 - (Estimating Station Transfer Trips of Seoul Metropolitan Urban Railway Stations -Using Transportation Card Data -)

  • 이미영
    • 대한토목학회논문집
    • /
    • 제38권5호
    • /
    • pp.693-701
    • /
    • 2018
  • 수도권 도시철도의 환승통행은 '노선간환승'과 '역사환승'으로 구분된다. 역사환승은 1) 교통카드 Tag-In 단말기 운영노선과 초승열차 운영노선이 다른 경우와 2) 최종 하차열차 운영노선과 교통카드 Tag-Out 단말기 운영노선이 다른 경우에 발생한다. 기존연구에서 주로 교통카드자료를 이용한 환승량 추정은 '노선간 환승량'을 의미하며 '역사환승량'은 제외되어 환승통로를 이용하는 보행에 대한 과소추정의 원인이 되었다. 본 연구는 수도권 대중교통카드자료를 이용해서 역사환승량을 추정하는 방안을 제시한다. 이를 위해 승객의 경로선택모형에 역사환승량 산정에 적합하도록 변형된 Big-Node 기반 네트워크 구축기법과 자료구조 방법론을 제시한다. 1일 약 800만 건의 수도권 도시철도 이용카드자료를 대상으로 사례분석을 시행한다.

고속버스터미널 이용자의 환승행태에 기반을 둔 환승저항 모형 구축 연구 (Modelling of Transfer Impedance of based an Express Bus Terminal use Behavior)

  • 김황배;권영종
    • 대한토목학회논문집
    • /
    • 제30권2D호
    • /
    • pp.99-103
    • /
    • 2010
  • 본 연구는 고속버스 이용자가 고속버스 터미널에서 경험하는 불편함을 개선함으로써 대중교통 체계의 경쟁력을 높이고 효율성을 개선하기 위하여 터미널 내 연계/환승 시 체감환승시간으로 환산된 환승저항을 산정하는 모형을 구축하고 이를 바탕으로 주요 고속버스 터미널의 환승저항을 산출하였다. 그 결과 외부보행거리 100m의 증가(감소)는 통행시간 3분의 증가(감소)와 같으며, 내부보행거리 100m의 증가(감소)는 5분, 계단 100개의 증가는 약 13분의 통행시간 증가, 에스컬레이터 1대 설치는 약 3분의 통행시간 감소와 같음을 알 수 있었다. 본 연구에서 체감시간으로 산출된 환승저항은 환승센터의 환승 여건을 비교하고 시설개선의 우선순위를 판단하는 데에 객관적 지표로 활용될 수 있으며, 신규 환승센터 설계 시 시설 가이드라인을 만드는 데에도 활용이 가능하다.

도시철도역사의 환승저항 모형 구축 연구 (Modelling of Transfer Impedance of Urban Rail Station)

  • 김황배;최진희
    • 대한토목학회논문집
    • /
    • 제30권1D호
    • /
    • pp.11-15
    • /
    • 2010
  • 본 연구는 도시철도 이용자가 환승센터에서 경험하는 불편함을 개선함으로써 대중교통 체계의 경쟁력을 높이고 효율성을 개선하기 위하여 전국의 주요 도시철도 역사를 대상으로 시설여건 물리적 요소들에 대한 보행자 편의성을 계량하여 환승저항을 산정하는 모형을 구축하고 이를 바탕으로 주요 도시철도 역사에 대한 환승저항을 산출하여 비교하였다. 그 결과 환승센터 외부보행거리 100m의 증가(감소)는 통행시간 2분의 증가(감소)와 같으며, 환승센터 내부보행거리 100m의 증가(감소)는 3분, 계단 100개의 증가는 약 4분의 통행시간 증가, 에스컬레이터 1대 설치는 약 1분의 통행시간 감소와 같음을 알 수 있었다. 체감시간으로 산출된 환승저항은 환승센터의 환승 여건을 비교하고 시설개선의 우선순위를 판단하는 데에 객관적 지표로 활용될 수 있으며, 신규 환승센터 설계 시 시설 가이드라인을 만드는 데에도 활용이 가능하다.

교통카드 Tag 제약을 반영한 통행자 경로선택에 대한 합리성 평가 연구 : 수도권 지하철 네트워크를 중심으로 (Rationality of Passengers' Route Choice Considering Smart Card Tag Constraints : Focused on Seoul Metropolitan Subway Network)

  • 이미영;남두희;심대영
    • 한국ITS학회 논문지
    • /
    • 제19권6호
    • /
    • pp.14-25
    • /
    • 2020
  • 본 연구는 교통카드자료 이용하여 수도권 지하철을 통행하는 승객의 경로선택의 합리성에 대한 평가를 시행하는 방법론을 제안한다. 사용자 경로선택의 합리성은 최적의 경로를 선택한다는 기본원리로서 확정성과 유사성으로 구분한다. 확정성은 승객이 선택한 경로는 시스템적 최적경로와 일치하는 정도이다. 유사성은 시스템적 최적경로와 유사하게 파악되는 정도이다. 합리성을 판단하는 기법으로 K경로탐색기법을 이용하여 경로를 열거하는 방법을 구축하였다. 유사성 내에서 확정성을 파악하기 위하여 민자운영기관의 환승단말기 Tag 정보를 활용하였다. 따라서 유사성에서 승객이 선택한 최적경로는 Tag를 경유한 경로와 동일하다는 개념을 적용하였다. 연구결과 최적경로(K=1)로 나타나는 확정성은 90.4(%), K=(2-10)으로 나타나는 유사성은 7.9(%)로서 총 98.3(%)의 수도권 지하철 통행이 합리적으로 설명된다고 평가하였다. 비합리적 통행 1.7(%)는 사용자 다양성을 고려하여 나타나는 설명되지 않는 에러항으로 평가된다고 파악하였다.