• Korean journal of food and cookery science
• /
• v.15 no.4
• /
• pp.377-381
• /
• 1999

This study was designed to observe the effect of the amount of egg and the specific gravity on the quality of sponge cake. There was a little difference of the moisture content by the specific gravity when the amount of egg was same. However, as the amount of egg was increased at the same specific gravity, the moisture content and baking loss was significantly increased(p<0.05). At 100% of egg amount, the largest specific loaf volume was gained at 0.55 of specific gravity, in the same way 150% at 0.45, 200% at 0.35, 250% at 0.45, The hardness of sponge cake was increased as the specific gravity was increased at the same amount of egg(p<0.05). The specific gravity which the lowest hardness was gained was 0.55 with 100% of the amount of egg, in th same way 0.45 with 150%, 0.35 with 200%. As the period of storage was longer, the increase of hardness was increased as the specific gravity went up at the same amount of egg(p<0.05). Therefore, in the case of sugar content 166%, the specific gravity with maximum specific loaf volume and minimum hardness was gained 0.55 at the amount of egg 100%, 0.45 at 150%, 0.35 at 200% and 0.35 at 250%.

• Ocean and Polar Research
• /
• v.39 no.4
• /
• pp.257-267
• /
• 2017

Although Pacific mackerel (Scomber japonicus) is an important commercial species in Korea, its recruitment mechanism remains largely unknown. Diel vertical positioning of larvae in the water column, which is affected by their specific gravity and the surrounding water density, may help to provide an understanding on recruitment success through predator avoidance and prey availability. The specific gravity measurement on Pacific mackerel eggs and larvae would seem to be essential information necessary to learn about the transport process from spawning to nursery grounds, and consequently the recruitment success. Eggs were artificially fertilized, and larvae were fed with rotifer when their mouths opened 3-4 days after hatching. We conducted the experiment using a density gradient water column to measure the ontogenetic changes in specific gravity from fertilization to 10 days after hatching. Egg specific gravity was stable during most of the embryonic period, but a sudden increase to $1.0249g\;cm^{-3}$ happened just before hatching. However, the specific gravity of newly hatched larvae was much lighter ($1.0195g\;cm^{-3}$), and specific gravity tended to increase continuously after hatching. Comparison of specific gravity with seawater density reveals that eggs and newly hatched larvae can float in the surface layer of the ocean. For the later period of the experiment, the specific gravity showed a cyclic diel pattern: the highest in the evening while the lowest at dawn. The fullness of larval stomach may be responsible for the observed differences in specific gravity, because stomach fullness was lower (40-60%) at midnight, and higher (80-85%) in evening. The diel pattern of specific gravity might provide clues regarding how larvae match the diel vertical migration of prey organisms.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.3
• /
• pp.332-337
• /
• 2018

The Pacific cod Gadus macrocepahlus, lays demersal eggs and the hatching larvae rise toward the surface layer of the ocean to feed. The change in the specific gravity of eggs and larvae was investigated to examine their vertical distribution and movement in the water column. The specific gravities of fertilized eggs and various size classes of larvae were measured using a density gradient apparatus. In total, the instantaneous specific gravity of 146 eggs and 225 larvae were measured. To prevent any disturbance in the gradient water column due to larval movement, 0.004% MS222 was used for anesthesia. Due to their high specific gravity, eggs spawned were deposited over the sea-bed of the spawning ground. The specific gravity of hatching larvae decreased abruptly. However, Pacific cod larvae still had a comparatively high specific gravity at hatching ($1.03655{\pm}0.00146g/cm3$, n=4, mean SL=3.62 mm) and their specific gravities tended to decrease as they grew. The specific gravity stabilized 6 days after hatching ($1.02590{\pm}0.00212g/cm3$, n=15, mean SL=4.67 mm) and the cod larvae were eventually able to float in the water column.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.366-369
• /
• 2007

In this study, the feasibility of reusing the eluent was confirmed by monitoring its specific gravity during the chromatographic purification of paclitaxel from plant cell cultures. The specific gravity of the eluent (methanol/water = 70/30, v/v) was measured prior to its elution through the hydrophobic resin column. The measurement showed a specific gravity of 0.853. The discharged eluent from the column outlet was first evaporated under vacuum pressure. The evaporated eluent was collected and condensed into a liquid eluent again, followed by the HPLC analysis in order to check the presence of any trace of impurity. Even if the specific gravity of the liquid eluent is varied from 0.853 as a result of the evaporation and condensation, the eluent can still be reused after it specific gravity is adjusted by the addition of methanol or water. The reuse of the eluent resulted in the paclitaxel yield of 86% with a purity of 95% which were closely similar to those of before the eluent reuse. These results indicate that the strategy of reusing the eluent on the basis of the specific gravity analysis was successfully implemented in this study.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1889-1893
• /
• 2010

Differential pressure type level measuring systems have been using widely for industrial applications like drum level measurements in power plants. Because of difficulties in specific gravity compensation for vapor and liquid inside the vessel and the sensing lines, this type of measuring systems reveal significant measuring error. In this paper, the major reason causing errors on the differential pressure type level measurement is analyzed and a method of more accurate calculation for specific gravity compensation is introduced.

• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.90-96
• /
• 1999

In contracts for sales of natural gas between sellers and buyers, it is not suncient to only measure a volumetric quantity of gas in flowing conditions in metering station. Therefore the measured volumetric quantity must be converted to that of reference conditions. The density of the natural gas required in such a calculation can be measured directly or estimated from the equation of sate or any other experimental methods. The specific gravity meter is the apparatus used to measure the density of fluids under the reference conditions and it can be widely used in industrial areas, especially in massive flow rate natural gas industry. This study has been carried out in an attempt to improve measurement accuracy of natural gas flow rate calculation, providing the adequate installation and proper operation conditions of specific gravity meter. The test results are 1) the density measurement errors in case of using methane and standard gas as calibration gases are smaller than using methane and nitrogen gas, 2) the periodical calibration to maintain accurate density measurements is essential, and 3) the specific gravity meter is sensitive to changes of environmental conditions, especially environmental temperature surrounding the specific gravity meter.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.684-687
• /
• 2004

The purpose of this study is to obtain basic data on the properties of the development of lightweight mortar contained foam agent for various applications in the field. In the experiment, as a result of measurement the specific gravity by the change of the W/C and the foam agent into a variable and measuring the compressive strength of mortar, specific gravity checked that a compressive strength therefore increased. Mortar is using lightweight foam agent having the change of specific gravity, the water cement ratio $50\%,\;40\%,\;30\%$. This paper present extensive data on the characteristics of strength of the lightweight mortar and also presents the mechanical characteristics of the lightweight according to specific gravity.

• Journal of the Korean Chemical Society
• /
• v.36 no.3
• /
• pp.442-445
• /
• 1992

Optical type hydrometer has been designed and constructed utilizing the fact that the refractive index of solution is varied in accordance with its specific gravity. Optical hydrometer produces the electric singal output with reflection of light in accordance with its specific gravity. This can be applied to continuous monitoring and/or automatic control of the specific gravity of solution. U-shaped glass rod was used a transfer medium of light, and the electronic circuit which utilize phase sensitive detection technique was designed to measure accurately the intensity of light. The specific gravity of sulfuric acid was measured with this hydrometer and the results show good linearity of output signal with its specific gravity.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.676-680
• /
• 2002

The specific gravity meter is the instrument used to measure the density of fluids under the reference conditions and it can be widely used in industrial areas, especially in massive flow rate natural gas industry. This study has been carried out in an attempt to improve measurement accuracy of natural gas flow rate calculation, providing the adequate installation and proper operation conditions of specific gravity meter. The test results are 1) the density measurement errors in case of using methane and standard gas as calibration gases are smaller than using methane and nitrogen gas, 2) the periodical calibration to maintain accurate density measurements is essential, and 3) the specific gravity meter is sensitive to changes of environmental conditions, especially environmental temperature surrounding the specific gravity meter.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.1
• /
• pp.45-54
• /
• 1988

This study was carried out to investigate the fiber length, fiber width and fiber thickness on the longitudinal direction by the parts of culm and also specific gravity in air dry, dyna.mic mechanical properties and internal frictions by the internode and the node in Phyllostachys bambusoides Phyllostachys nigra var. henonis and Phllostachys edulis which were grown in Korea. The results obtained were as follows; 1. The variations of fiber length and fiber width on the longitudinal direction had a tendency to increase slightly from the butt and then to decrease toward the top. but there was not a definite variation for fiber thickness according to the parts of culm. 2. The specific gravity in air dry of internode was increased from the butt toward the top, but the specific gravity in air dry of node was not correlations with the parts of culm. 3. Dynamic Young's modulus of internode on the longitudinal direction was increased according to the heights of culms within each species, and there were in order of P. edulis P. nigra var. henonis and P. bambusoides. 4. Correation coefficients between the specific gravity and the dynamic Young's modulus were 0.837 in P. bambusoides 0.871 in P. nigra var. henonis and 0.935 in P. edulis and there was also highly significant for dynamic Young's modulus between the specific gravities in air dry. 5. There were not correlations between the internal frictions and the parts of internode.