• Journal of Information Processing Systems
• /
• v.16 no.6
• /
• pp.1309-1323
• /
• 2020

Crowd evacuation simulation is an important research issue for designing reasonable building layouts and planning more effective evacuation routes. The social force model (SFM) is an important pedestrian movement model, and is widely used in crowd evacuation simulations. The model can effectively simulate crowd evacuation behaviors in a simple scene, but for a multi-obstacle scene, the model could result in some undesirable problems, such as pedestrian evacuation trajectory oscillation, pedestrian stagnation and poor evacuation routing. This paper analyzes the causes of these problems and proposes an improved SFM for complex multi-obstacle scenes. The new model adds navigation points and walking shortest route principles to the SFM. Based on the proposed model, a crowd evacuation simulation system is developed, and the crowd evacuation simulation was carried out in various scenes, including some with simple obstacles, as well as those with multi-obstacles. Experiments show that the pedestrians in the proposed model can effectively bypass obstacles and plan reasonable evacuation routes.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.623-629
• /
• 2010

A geographical routing protocol is typically utilized for a route selection of VANET. Even if it is conceptually well adapted into VANET, message delivery tends to be unreliable with frequent network partitions, which mainly come from the inherent characteristics such as high mobility and irregular traffic density. In this paper, we deal with a method to enable reliable message delivery with reflecting the traffic density on routing decision. By concatenating the message delivery cost of each of inbetween junction section, $1^{st}$ and $2^{nd}$ shortest paths are initially determined. When it is not possible to deliver the message on a junction on the 1st path, we utilize two novel ideas, that is, letting the message stay on the junction to find out a new relay node, and putting a replicated copy to reach via a detour path. By using the NS-2 network simulator, our method has been examined in terms of message delivery rate and delay. It shows that our method is much efficient than the other method in the low density environment, while it brings similar results in the high density environment.

• Journal of Digital Contents Society
• /
• v.6 no.1
• /
• pp.55-62
• /
• 2005

In this paper, we propose the new technique to compute the optimal route by considering the direction of distribution vehicles and the location for delivery, developing the algorithm of the shortest route to approach the location as applying the gemetic algorithm. This approach makes it possible for us to find the best route even under itineraries which include many destinations. Lively studies are currently in progress on the development of vehicle navigation software, combining PDA GPS, and electronic maps. Many web-sites are providing a varier of services which use electronic maps. Popular among these services is one that computes the optimal route between two positions that a user inputs. This service of computing the optimal route plays an important role in distribution industries such as home-delivery. For the distribution system. the construction of a vehicle regulation system enables us to calculate and manipulate the optimal route for distribution vehicles, to enhance the efficiency in making use of vehicles and labor, and to reduce costs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.448-449
• /
• 2016

Enlargement and complexification of current structures increase the expected casualty in case of accident in those e.g., fire. In that case, there only have been basic instructions such as announcement of that situation, alarm bell, exit signs, etc. but any guidance to lead to proper escape route was not been provided so far. To tackle the problem, several schemes have been proposed. However, various risk factors were not considered and route discovery performance must be improved to be applied to structures. Therefore, this paper proposes an optimal route discovery system for emergency escape from disaster situations which takes into account various possible risk factors and enhances the searching efficiency by using the $A^{\ast}$ algorithm. Performance evaluation by computer simulation shows that the proposed scheme effectively leads to safe escape route.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.1 s.26
• /
• pp.1-8
• /
• 2005

The purpose of this study is to develop a simulation model of rural road path for infrastructure of green-tourism and public service in rural areas. This study makes an objective function for moving cost minimization considering car travel time according to road characteristics, which can route the optimal shortest road paths between the center places and all rear villages, based on GIS coverages of road-village network for connecting between center places and rural villages as input data of the model. In order to verify the model algorithm, a homogeneous hexagonal network, assuming distribution of villages with same population density and equal distance between neighborhood villages on a level plane area, was tested to simulate the optimal paths between the selected center nodes and the other rear nodes, so that the test showed reasonable shortest paths and road intensity defined in this study. The model was also applied to the actual rural area, Ucheon-myun, which is located on Hoengsung-gun, Kangwon-do, with 72 rural villages, a center village (Uhang, 1st center place) in the area, a county conte. (Hoengsung-eup, 2nd center place), and a city (Wonju, 3rd center place), as upper settlement system. The three kinds of conte. place, Uhang, Hoengsung-eup, and Wonju, were considered as center places of three scenarios to simulate the optimal shortest paths between the centers and rural villages, respectively. The simulation results on the road-village network with road information about pavement and width of road show that several spans having high intensity of road are more important that the others, while some road spans have low intensity of road.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2037-2043
• /
• 2015

Proposed algorithm in this thesis introduced cells, units of router group, to conduct distributed processing of previous genetic algorithm. This thesis presented ways to reduce search delay time of overall network through cell-based genetic algorithm. Also, through this experiment, in case of a network was damaged in existing optimal path algorithm, Dijkstra algorithm, the proposed algorithm was designed to route an alternative path and also as it has a 2nd shortest path in cells of the damaged network so it is faster than Dijkstra algorithm, The study showed that the proposal algorithm can support routing of alternative path, if Dijkstra algorithm is damaged in a network.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1159-1164
• /
• 2004

There is an Overhead Hoist Transport(OHT) for delivering the wafer in semiconductor processing. The transfer system is consists of carrier vehicle. rail, and support. OHTCMS(OHT Control and Management System) has to take the feature, such as the optimal control and integration with several OHT. In this paper, ESRA(Efficiency of Shortest - Route Algorithms) is proposed which can be transported optimal route and be prevented collision using the Floyd-Warshall algorithms. The proposed algorithm is verified through consecutive simulation for a long time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.335-342
• /
• 2000

This study is to integrate and to analyzegraphic and attribute data in features which should be preceding for the ITS construction. A 1:5000 scale map as a national basemap was used and was checked for feasibility. For the convenience of position confirmation, the analysis component was developed and was linked to addresses. Also, the attribute information was considered on the shortest route, and optimal route was selected by investigating traffic volumes on main crossroads depending on the time zone. The optimal route could be selected by analyzing user's demands, position and statistical data, and the position information could be provided efficiently by combining the graphic information with the land register information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1215-1223
• /
• 2014

In multi-hop wireless networks, a message transmission path is set up on demand by a route discovery step, where a shortest path is used in general. The shortest path, however, normally uses the nodes near the center area, which causes a high traffic load in that area and reduces the message transmission reliability. We propose a stable routing protocol considering the remaining energy of nodes. Our protocol uses ETX as a link performance estimator and tries to avoid the nodes with smaller energy. By doing this, we can reduce the route failure probability and packet loss. We have evaluated the performance of the proposed protocol using QualNet and compared with AODV and MRFR protocols. The simulation result shows that our protocol has a similar performance as MRFR in terms of end-to-end message reception ratio, average message delay and delay jitter, but outperforms MRFR in terms of traffic load distribution.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.161-169
• /
• 2010

According to the recent increase in air traffic more efficient air traffic control is required. This paper proposes the algorithm for efficient air traffic flow management. Aeronautical traffic environment is different from the common traffic environment since it needs vertical and horizontal separation deviation. In this paper used vincenty's fomula, we calculated distance of route for produced weight that was applied air traffic volume in distance of route using dijkstra algorithm. Then we let aircraft selects a course that minimize to wasting of fuel and time. As a simulation result, so unlilke simply shortest course calculation of existing course calculation algorithm, we confirmed that proposed algorithm in this paper can do air traffic control more efficiently by selecting optimized route.