• 한국정보통신학회논문지
• /
• 제8권8호
• /
• pp.1685-1691
• /
• 2004

본 논문은 가변 구조 제어 시스템을 이용하여 AC Servo 모터의 원호 보간 오차를 개선하는데 목적을 두고 있다. AC Servo 모터를 사용하는 공작 기계의 동작에서 오차는 서보 드라이버의 시간 지연, 마찰, 그리고 모터의 x축 y축의 이득값이 어울리지 않는 등의 여러 요소가 있을 것이다. 본 논문에서는 슬라이딩 모드제어 시스템은 AC Servo 드라이브의 수치적 예로 응용되었다. 실험 결과 값은 전형적인 PI 제어와 비교하여 시스템의 원호 보간 오차 개선에 관한 우수성을 보여주고 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.747-752
• /
• 1987

The dynamic characteristics of a load-sensing hydraulic servo system are complex and highly unstable. Another property of the system is that the setting value of pump compensator is closely related to energy efficiency as well as control performance of the system. This necessitates the development of an effective control algorithm which guarantees good control performance, stability and energy efficiency. This paper considers a suboptimal PID control for the velocity control problem of the load-sensing hydraulic servo system. The results of simulations studies and experiments show that the proposed suboptimal controller can produce much better control performance than nonoptimal controllers and give effective energy efficiency.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.348-353
• /
• 1994

Magnetic Servo Levitation (MSL) has been proposed as a method to drive a fast-tool servo system. This paper discusses some fundamental control and modeling issues in the development of a long-range high-bandwidth fast-tool servo based on MSL. A resursive linear model is developed to describe the system's dynamics linear model is developed to describe the system's dynamics, and further used to discuss controller design. For a given controller architecture, the performance of two controllers is then compared, one based on an approximation to the inverse plant dynamics, the second based on a adaptive neural network.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.139-148
• /
• 1995

In this paper an electro-hydraulic servo system is designed by using a fuzzy control algorithm. In order to drive an optimal fuzzy control system, a simulation program for the control system has been developed. By this program the fuzzifier and defuzzifier, a fuzzy inference method, a fuzzy relational matrix, and a fuzzy inference method are investigated. As a result, Larsen inference method, 9*9 fuzzy relational matrix, and center of area defuzzifier are turned out the best as parameters. Finally this method is compared with the conventional PID algotithm, and showed that the fuzzy control performs better than PID algorithm. The fuzzy control performs very well adap- tation against uncertain disturbances.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.321-324
• /
• 1988

This paper presents the result of driving performance analysis of PMSM type AC servo motor based on control system using a microprocessor. The experiment using the microprocessor is tested with a 120[v], 200[w] PMSM type AC servo motor. The PWM signal generated in the microprocessor for the servo motor voltage is chapped by power transistor modules to change the AC servo motor speed. The torque of the AC servo motor with a permanent magnet can be easily controlled over a wide range by changing the AC servo motor current.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1309-1314
• /
• 2003

The high precision positioning mechanism is used in various industrial fields. It is used in semiconductor manufacturing line, test instrument, Bioengineering, and MEMS and so on. This paper presents a positioning mechanism with dual servo system. Dual servo system consists of a coarse stage and a fine motion stage. The course stage is driven by VCM and the actuator of fine stage is the PZT. The purposes of dual servo system are stability, higher bandwidth, and robustness. Lead compensator is applied to this control system, and is designed by PQ method. Designed compensator can improve property of positioning mechanism.

• 조명전기설비학회논문지
• /
• 제17권1호
• /
• pp.112-115
• /
• 2003

산업 자동화의 고정밀도에 따라 서보 제어시스템은 강인제어가 요구되고 있다. 그러나 서보 제어시스템이 외란의 영향을 받게 되면 제어시스템의 강인제어는 어렵게 된다. 이에 대한 보완적인 한 방법으로 본 논문에서는 주 제어기(PID)와 미분 관리제어기의 혼합형 제어기법을 제시하였다. 주 제어기는 궤환제어기로서 동작하고, 미분 관리제어기는 외란에 의한 불안정한 상태에서 보조적인 동작을 한다. 미분 관리제어기의 강인성은 전통기의 속도제어에 의해서 확인하였다.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.89-99
• /
• 2008

In this paper, the position tracking control problem of the servo system with nonlinear dynamic friction is issued. The nonlinear dynamic friction contains a directly immeasurable friction state variable and the uncertainty caused by incomplete parameter modeling and its variations. In order to provide the efficient solution to these control problems, we propose the composite control scheme, which consists of the robust friction state observer, the FNN approximator and the approximation error estimator with sliding mode control. In first, the sliding mode controller and the robust friction state observer is designed to estimate the unknown internal state of the LuGre friction model. Next, the FNN estimator is adopted to approximate the unknown lumped friction uncertainty. Finally, the adaptive approximation error estimator is designed to compensate the approximation error of the FNN estimator. Some simulations and experiments on the servo system assembled with ball-screw and DC servo motor are presented. Results show the remarkable performance of the proposed control scheme. The robust friction state observer can successfully identify immeasurable friction state and the FNN estimator and adaptive approximation error estimator give the robustness to the proposed control scheme against the uncertainty of the friction parameters.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.710-714
• /
• 2005

A dynamical analysis and PID control of a compressed gas expulsion system is performed. The purpose of this study is to develop a compressed gas discharging system and to verify the validity of the system. The electro-hydraulic servo valve is modeled as a 3th order transfer function to calculate flow force affecting expulsion valve is significantly considered. The friction force in the expulsion valve is considered as a nonliner model of stribeck effect. The dynamic characteristics of this system is examined by the computer simulation. The position control of the expulsion valve is performed by PID controller.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1245-1254
• /
• 2011

This paper proposes a target tracking algorithm for wheeled mobile robots using in various fields. For the stable tracking, we apply a vision system to a mobile robot which can extract targets through image processing algorithms. Furthermore, this paper presents an algorithm to position the mobile robot at the desired location from the target by estimating its relative position and attitude. We show the problem in the tracking method using the Position-Based Visual Servo(PBVS) control, and propose a tracking method, which can achieve the stable tracking performance by combining the PBVS control with Image-Based Visual Servo(IBVS) control. When the target is located around the outskirt of the camera image, the target can disappear from the field of view. Thus the proposed algorithm combines the control inputs with of the hyperbolic form the switching function to solve this problem. Through both simulations and experiments for the mobile robot we have confirmed that the proposed visual servo control method is able to enhance the stability compared to of the method using only either PBVS or IBVS control method.