• 한국정보통신학회논문지
• /
• 제24권4호
• /
• pp.546-552
• /
• 2020

원격제어서버와 작동기가 무선네트워크를 통해 연결되어 동작하는 원격제어시스템은 그 편의성이 큰 만큼 잠재된 위험성도 크다. 신뢰할 수 없는 무선 채널로 인해 제어명령이 유실될 수 있기 때문이다. 지능형원격제어시스템은 작동기에 제어명령을 유추할 수 있는 기능을 추가하여 제어명령을 수신하지 못하는 경우에도 동작하도록 해주는 시스템이다. 본 논문에서는 지능형원격제어시스템 테스트베드를 구현하여 원격제어시스템에서 발생할 수 있는 문제 상황들을 실험을 통해 확인하고 지능형원격제어시스템이 문제를 해결하는 것을 검증하였다. 지능형원격제어시스템은 일반적인 원격제어시스템이 높은 통신오버헤드를 감수해야 달성할 수 있는 성능을 더 적은 통신오버헤드만으로도 달성할 수 있음을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2192-2197
• /
• 2003

This paper suggests remote experiments using the internet for the control education. The remote experiment is composed of equipment server computers, networks accessible to internet, and real plants such as inverted pendulums, crane systems and microcontrollers. Additionally, it requires a server program that has I/O functions with plants and calculate the control, an interface program bridging between web and the server program, and the home page including the detail explanation for the usage. For effective educations, how to perform experiments and how to combine the experiment with lectures will be discussed. The simple experiments by entering a few control parameters and the complex experiments by designing overall controls, will be explained. Technologies related with the remote experiment and other possible remote experiment will be introduced. It is demonstrated that the remote experiment will be very useful, particular for control education where students have difficulties in performing the experiments for lack of experimental equipments.

• Journal of Biosystems Engineering
• /
• 제25권4호
• /
• pp.301-310
• /
• 2000

An autonomous tractor system was developed and its performance was evaluated. The system consisted of a tractor system of and a remote control station. The tractor and the remote control station communicated each other via wireless modems. The tractor had a DGPS(differential global positioning system), sensors, a controller and a modem. The DGPS collected position data and the tractor status was estimated. The information of tractor status and sensors was transferred to the remote control station. Then, the control station determined the control data such as steering angles using a fuzzy controller. The fuzzy controller used the information from the DGPS, sensors, and GIS(geographic information system) data. The control data were obtained by remote signal processing at the control station The control data for autonomous operation were transferred to the tractor controller. The performances of an autonomous tractor were evaluated for various speeds, different initial positions and different initial headings. About 1.3 seconds of time lag was occurred in transferring the tractor status data and the control data. Compensation the time lag, about 27cm deviation was observed at the speed of 0.5m/s and 37cm at the speed of 1m/s. Error caused mainly by the time lag and it would be reduced by developing a full-duplex radio module for controlling the remote tractor.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1480-1490
• /
• 2007

본 논문에서는 WINDOWS CE .NET 기반의 PDA를 이용한 원격제어시스템을 구현하였다. 서버 시스템의 운영체제는 WINDOWS CE .NET을 사용하여 사용자에게 쉬운 사용 환경을 제공하며, 운영체제 이미지에 개발한 디바이스 드라이버를 추가하여 하드웨어 장치를 제어한다. 임베디드 서버는 PC 클라이언트와 PC 클라이언트, PC 클라이언트와 PDA 클라이언트, PDA 클라이언트와 PDA 클라이언트간의 메시지 통신을 지원한다. 본 논문은 원격제어시스템을 구현하는데 있어서 에뮬레이터를 사용하지 않고 실제 PDA와 임베디드 보드로 시스템을 구현하였다. 제안된 시스템은 임베디드 보드를 서버로 사용하고 PDA를 클라이언트로 사용하여 무선 인터넷이 제공되는 환경이라면 어느 곳에서나 원격으로 대상물을 제어할 수 있다.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.703-709
• /
• 2019

This paper proposes a monitoring and remote control system, an essential part of In Vehicle Infotainment (IVI) and Human Vehicle Interface (HVI) to provide safety and convenience to a driver. The system utilizes Bluetooth for a short range communication and utilizes WCDMA for a long range communication to enhance efficiency. In this paper, an integrated controller, which integrates a CAN communication module, a Bluetooth communication module, a WCDMA communication module, is designed to control a car. Also, a remote server for managing data is designed to provide real-time monitoring and remote control for a user via smart devices. Experiment results show that all the proposed remote control, driving log, real-time monitoring, and diagnostics functions are working properly. With the proposed system, a driver can drive safely by monitoring and inspecting a car before driving via smart devices, and control conveniently by controlling a car remotely.

• 대한임베디드공학회논문지
• /
• 제8권4호
• /
• pp.205-212
• /
• 2013

In recent, the demand of Unmanned Aerial Vehicles (UAVs) that can autonomous navigation and remote control has been increased in military, civil and commercial field. Particularly, existing researches focused on autonomous navigation method based on vanish point and remote control method based on event processing in indoor environments. However, the existing methods have some problems. For instance, a detected vanish point in intersection point has too much detection errors. In addition, the delay is increased in existing remote control system for processing images in real time. Thus, we propose improved vanish point algorithm by removing detection errors in intersection point. We also develop a remote control system with android platform by separating flying control and image process. Finally, we compare the proposed methods with existing methods to show the improvement of our approaches.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.776-778
• /
• 1997

We propose a remote controller for a SCARA typed direct drive manipulator with two degrees-of-freedom(DOF). A remote controller system for SCARA robot of DDA is designed using a 2 DSP (TMS320c31) board and Winsock(Internet program class library supplied by Microsoft). The design objective of the system is to implement real time dynamic control algorithms which have been tested only by simulations so far and remote control regardless of the distance between user and robot. Because this system runs on Win95, we developed a VxD program to communicate with DSP controller.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.302-308
• /
• 2006

We introduce the concept of a remote distributed embedded system to integrated fieldbus based control systems in internet/Intranet. As a result fieldbus systems are opened up for remote monitoring, remote maintenance, and remote control applications using state of the art Web-technology. This paper addresses the design of a remote distributed embedded system using Internet and CAN for multi-Induction motor of Building and Industrial field. The fieldbus used the CAN based networked intelligent multi-motor control system using DSP2812 microprocessor. To build such a system, the TCP/IP-CAN Gateway which convert a CAN protocol to TCP/IP protocol and vice verse, was designed. A experimental simulation system consists of a TCP/IP-CAN Gateway in remote place and a command PC ti be connected ti Ethernet.

• 제어로봇시스템학회논문지
• /
• 제13권4호
• /
• pp.329-334
• /
• 2007

This paper deals with self-tuning of fuzzy control systems. The fuzzy logic controller(FLC) has parameters that an: input and output scaling factors to effect control output. Tuning method is proposed for the scaling factor. In this paper. it is studied to control and to monitor the remote system statues using SOAP for communicate between the server part and the client part. The remote control system is controlled by using a web browser or a application program. The server part is waiting for the request of client part that uses internet network for communication each other and then the request is reached. the server part saves client data to the database and send a command set to the client part and then the client part sends command to controller in a cool chamber. The administrator can control and monitor the remote system just using a web browser. The effects of membership functions, defuzzification methods and scaling factors are investigated in the FLC system.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권5호
• /
• pp.216-219
• /
• 2006

This paper presents an XML based standard specification of remote control protocol for home appliances. In the framework level, the XML protocol provides a useful bridge between services and platforms. The proposed protocol has been implemented into a personal video recorder for remote recording service. The results imply the potential of global standards for remote control by its minimum overhead in network and processor. The proposed XML is designated RCXML in this paper.