• Title/Summary/Keyword: a recovery

Search Result 12,471, Processing Time 0.037 seconds

Test of Heat Recovery Performance of a Microturbine (마이크로터빈의 열회수 성능시험)

  • Jeon, Mu-Sung;Lee, Jong-Jun;Kim, Tong-Seop;Chang, Se-Dong
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.32 no.8
    • /
    • pp.629-635
    • /
    • 2008
  • Recently, microturbines have received attention as a small-scale distributed power generator. Since the exhaust gas carries all of the heat release, the microturbine CHP (combined heat and power) system is relatively compact and easy to maintain. Generating hot water or steam is usual method of heat recovery from the microturbine. In this work, a heat recovery unit producing hot water was installed at the exhaust side of a 30 kW class microturbine and its performance characteristics following microturbine power variation was investigated. Heat recovery performance has been compared for different operating conditions such as constant hot water temperature and constant water flow rate. In particular, the influence of water flow rate and hot water temperature on the recovered heat was analyzed.

Effects of Process Variables on The Electrochemical Recovery of Palladium in A HCl Solution

  • Kim, Min-Seuk;Lee, Jae-Chun;Kim, Won-Baek
    • Resources Recycling
    • /
    • v.14 no.1
    • /
    • pp.55-63
    • /
    • 2005
  • This study investigated the electrochemical recovery of palladium in a HCl solution that is used for palladium leaching. The high acidity of HCl solution and the low concentration of Pd ions increased the cathodic overpotential and reduced the limiting current density. Lowering the current density produced dense deposits; however, they were under high tensile stress. Raising the temperature affected both the densification and the stress, which enabled the attainment of dense Pd deposits under low stress. Lowering the current density and raising the temperature up to 70$^{\circ}C$ was recommended for the recovery of palladium as sound bulk Pd deposits. Current efficiency was over 85% at the initial stage of recovery may decrease the current efficiency, since a low Pd ion concentration results in a low limiting current density.

Fault Tolerant System based on Recovery Agents (회복 에이전트 기반 결함 포용 시스템)

  • Lee, Hwa-Min;Jung, Soon-Young;Yu, Heon-Chang
    • The Journal of Korean Association of Computer Education
    • /
    • v.5 no.2
    • /
    • pp.21-28
    • /
    • 2002
  • This paper proposes a new approach to rollback-recovery using multi-agent in distributed computing system. Previous rollback-recovery protocols are dependent on inherent communication and operating system, which causes a decline of computing performance in distributed computing system. By using multi-agent, we propose rollback-recovery protocol that is independent on operating system. We define three kinds of agent. One is a recovery agent that performs rollback-recovery protocol after a failure. Other is an information agent that constructs domain knowledge as a rule of fault tolerance and information during failure-free operation. The other is facilitator agent that controls the efficient communication between agents. Also we propose rollback-recovery protocol using multi-agent and simulated the proposed rollback-recovery protocol using JAVA and agent communication language in CORBA environment.

  • PDF

The Experience of the Postpartum Depression : A Grounded Theory Approach (산후 우울 경험에 관한 연구 -근거 이론적 접근-)

  • 배정이
    • Journal of Korean Academy of Nursing
    • /
    • v.26 no.1
    • /
    • pp.107-126
    • /
    • 1996
  • The Purpose of this study was to build a substantive theory about the experience of postpartum depression. The qualitative research method used was rounded theory. The interviewees were eight others who had experienced postpartum depression. The data were collected through in-depth interviews with audiotape recording done by the investigator over a period of twelve months. he data were analyzed simultaneously by a constant comparative method in which new data were continuously coded into categories and properties according to Strauss and Corbin's methodology. Analysis the grounded data resulted in 28 concepts being identified. Eight categories emerged from the analysis. The categories were regret, loss of freedom, isolation of oneself, heartache, loss, emotional upset, avoidance, recovery. These substantive categories are consistent with precious research results. Causal conditions included : regret, loss of freedom. Phenomena : heartache, loss, emotional upset. Context : isolation oneself. Intervention condition : avoidance. Action/interaction strategies : desire for recovery. Consequences : recovery. These categories were synthesized into the core concept-The process of filling the empty loss of self. The process of the experienced postpartum depression was ① change after delivery, ② searching for a reason for depression, ③ effort to recover from postpartum depression, ④ recovery from postpartum depression and return to previous life. The process of recovery from postpartum depression was proceeded by ① support from others, especially husband, ② resolution of stressful life events, ③ reconstructing of life goals and resolution strategies, ④ acceptance of depression and seeking psychiatric treatment. Seven hypotheses were derived from the analysis. ① Mothers who experienced stressful life event and economic problem are more depressive. ② Mothers who have conflict with parents are more depressive. ③ The more somatic symptoms, the more depression. ④ Social support facilitates recovery from postpartum depression. ⑤ Mothers who have lower self-esteem are more depressive. ⑥ Mother's role overload disturbs recovery from postpartum depression. ⑦ Ideal maternal identity facilitates recovery from postpartum depression. Through this substantive theory, nurses can understand the importance of postpartum depression management.

  • PDF

Machine Learning Process for the Prediction of the IT Asset Fault Recovery (IT자산 장애처리의 사전 예측을 위한 기계학습 프로세스)

  • Moon, Young-Joon;Rhew, Sung-Yul;Choi, Il-Woo
    • KIPS Transactions on Software and Data Engineering
    • /
    • v.2 no.4
    • /
    • pp.281-290
    • /
    • 2013
  • The IT asset is a core part that supports the management objective of an organization, and the fast settlement of the IT asset fault is very important. In this study, a fault recovery prediction technique is proposed, which uses the existing fault data to address the IT asset fault. The proposed fault recovery prediction technique is as follows. First, the existing fault recovery data were pre-processed and classified by fault recovery type; second, a rule was established for the keyword mapping of the classified fault recovery types and reported data; and third, a machine learning process that allows the prediction of the fault recovery method based on the established rule was presented. To verify the effectiveness of the proposed machine learning process, company A's 33,000 computer fault data for the duration of six months were tested. The hit rate for fault recovery prediction was approximately 72%, and it increased to 81% via continuous machine learning.

A Study on Improvement Measures of Energy Recovery Efficiency through Analysis of Operational Status of Municipal Solid Waste Incineration Facilities (생활폐기물 소각시설의 운영 실태 분석을 통한 에너지회수 효율 개선방안 검토)

  • Park, Sang-Jin;Phae, Chae-gun
    • Journal of Korea Society of Waste Management
    • /
    • v.35 no.8
    • /
    • pp.762-769
    • /
    • 2018
  • This study was carried out to examine the improvement plan by analyzing the characteristics of imported wastes, operation rate, and benefits of energy recovery for incineration facilities with a treatment capacity greater than 50 ton/day. The incineration facility capacity increased by 3,280 tons over 15 years, and the actual incineration rate increased to 2,783 ton/day. The operation rate dropped to 76% in 2010 and then rose again to 81% in 2016. The actual calorific value compared to the design calorific value increased by 33.8% from 94.6% in 2002 to 128.4% in 2016. The recovery efficiency decreased by 29% over 16 years from 110.7% to 81.7% in 2002. Recovery and sales of thermal energy from the incinerator (capacity 200 ton/day) dominated the operation cost, and operating income was generated by energy sales (such as power generation and steam). The treatment capacity increased by 11% to 18% after the recalculation of the incineration capacity and has remained consistently above 90% in most facilities to date. In order to solve the problem of high calorific value waste, wastewater, leachate, and clean water should be mixed and incinerated, and heat recovery should be performed through a water-cooled grate and water cooling wall installation. Twenty-five of the 38 incineration facilities (about 70%) are due for a major repair. After the main repair of the facility, the operation rate is expected to increase and the operating cost is expected to decline due to energy recovery. Inspection and repair should be carried out in a timely manner to increase incineration and heat energy recovery efficiencies.

A Study on Alum recovery and reuse from the sludge in water treatment plant. (상수도 정수장 오이중 Alum회수 및 재활용에 관한 연구)

  • 김관천;노기환;강영식;이치영;류일광
    • Journal of environmental and Sanitary engineering
    • /
    • v.10 no.1
    • /
    • pp.86-96
    • /
    • 1995
  • Alum recovery has recently gained more attention because many water utilities need to improve their sludge handling and disposal practices. As part of an overall sludge management program recovery can reduce the amount of solids and allow for reuse of the recovered Alum as a coagulant. This study was examined the effectiveness of Alum recovery from the Sludge at the D water treatment plant in Kwangju city. The results were summarized as follows 1. Alum recovery was obtained sufficiently acidification(An optimum condition was pH2-3) With $H_{2}SO_{4}$ to settled sludge. In this case recovered liquid Alum from sludge of 2.1% solids concentration at pH 2.1 was contains Aluminum $1,602mg/{\ell}$(as $Al_{2}O_{3}$ 0.3% ) and other metal of low level. 2. It was an optimum condition to all reuse of recovered Alum as a coagulant that rate of Commercial Alum:Recovered Alum=$14{\mu}{\ell}/{\ell}{\;}:{\;}200{\mu}{\ell}/{\ell}$ In a result of Jar Tests. 3. It was a result of Alum recovery from sludge, the reduction effect of amount of solids was about 57.4%. 4. If all recovered Alum were reused the reduction effect of solid wastes disposal cost and chemical drug's cost was about 22%.

  • PDF

The effect of Recovery from Psychological Stress by Interior Landscape Spaces (실내조경에 의한 스트레스 해소효과)

  • 이진희;이창래
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.28 no.6
    • /
    • pp.106-113
    • /
    • 2001
  • The purpose of this study is to find out the effect of recovery from psychological stress when watching plants indoors. As an instrument of measurement of psychological stress, Galvanic Skin Resistance(GSR) has been used because it has been convenient to read a psychological sign without a medical sense and an instrument. In order to make the conditions of stress and recovery, video programs have been made, and especially, the video program of recovery has consisted of three types-- types 1 of watching plants in a botanical garden, type 2 of watching very bush street, and type 3 of closing eyes naturally. The two groups of normal and the mentally handicapped persons have been participated in this experiment to compare the effect of recovery. As the result of this test, the rate of stress relief has been maximumly effected by watching the video program of plants. Between the two groups the recovery of stress has had better effects on the mentally handicapped than the normal one. And also it shows that the circumstances of emotional refinement is led by having plants in indoor. The result of this test has been turned out to be highly useful. It is desirable that a indoor worker, staying for a long time, contact with plants visually to keep healthy mental conditions. This study suggests that the surrounding conditions or the settings of circumstances play an important role for the emotional refinement of the groups of mentally han야capped persons as well as the normal person.

  • PDF

A Cross-cultural Analysis of Online Satisfaction, Service Failure and Recovery: An E-A-S-QUAL Approach

  • Park, Min-Jung;Kim, Min-Jeong
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.35 no.6
    • /
    • pp.700-711
    • /
    • 2011
  • The purposes of the study were to identify the online service attributes that contribute to online consumer experiences of satisfaction, service failure, and service recovery and to examine whether differences exist in these attributes between U.S. and Korea. E-A-S-QUAL provided a useful framework for the study. Focus group interviews and web surveys were conducted by utilizing college students in both countries. No significant cultural differences were found in online service dimensions of service satisfaction. Personalization was the most frequently mentioned online service dimension of service satisfaction both in the U.S. and Korea. The findings showed significant cultural differences in terms of online service dimensions responsible for service failure and recovery. For Korean consumers, merchandising was one of the key online service dimensions of service failure, while efficiency was the important service dimension resulting in service failure for the U.S. consumers. In addition, for U.S. consumers, efficiency and personalization were the two most frequently mentioned service dimension for service recovery, while Korean consumers put more importance on the contact and information dimensions for service recovery. This study provided a comprehensive list of online service attributes important to online apparel retailing.

An Experimental Study on the Effect of Contact Angle for Recovery Rate of a Belt Skimmer (벨트식 유회수기의 접촉각이 회수율에 미치는 영향에 관한 실험적 연구)

  • Song, Dong-Eub;Yoon, Kyunghwan
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.22 no.12
    • /
    • pp.1702-1714
    • /
    • 1998
  • Removal of spilled oil over the sea and the river has become one of the urgent problems in these days. Removing oil using mechanical devices was recommended because chemical dispersion could cause the secondary contamination in the environment. In the present study a series of experiments were carried out to study the effect of operating conditions, especially, the angle between the belt and the fluid surface on the rate of recovery for the spilled oil using a belt skimmer. Three different types of operation, namely, upward pickup, downward pickup and up-and-downward pickup situations have been investigated for various contact angles, belt speeds and oil thicknesses to find the effects on the recovery rate. The highest rate of oil recovery was found in the case of a contact angle of $45^{\circ}$ and downward pickup. Furthermore, an optimal belt speed was found to reach the saturated recovery rate for a given oil thickness.