• Journal of Oral Medicine and Pain
• /
• v.18 no.1
• /
• pp.97-105
• /
• 1993

In order to evaluate the effectiveness of tooth brushing, mouth gargling and gum chewing in reducing halitosis, 84 individuals ranging in age from 22 59 28 years old were examined. These individuals had no gross oral abnormalities, other than mild gingival inflammation, dental caries, nasopharyngeal disorder, or systemic diseases that were associated with halitosis. They were divided into a tooth brushing group, a mouth garging group, a gum chewing group and a control group that did not use any halitosis removing method. Each of the groups included 21 persons, B.B. Checker (Tokuyama Soda Col, LTDl, Japan) was used to measure the concentrations of intraoral volatile methyl mercaptan of each group. The concentrations of intraoral volatile methyl mercaptan were measured before and after lunch, and after removing halitosis by toothe brushing, mouth gargling and gum chewing. The obtained results were as follows : 1. The average concentration of intraoral volatile methyl mercaptan before lunch was 1.79ppm and after lunch it was 2.02ppm, an increase of 12.9%. 2. In the tooth brushing group the average concentration of intraoral volatile methyl mercaptan was 0.61ppm, in the mouth gargling group it was 1.15ppm, in the gum chewing group it was 1.64ppm and in the control group it was 1.92ppm. It decreased 69.5% in the tooth brushing group, 43.8% in the mouth gargling group, 18.4% in the gum chewing group and 5.4% in the control grop (p<0.05). 3. There were significant differences between the tooth brushing and control group, tooth brushing and gum chewing group and between mouth gargling and control group in concentrations of intraoral volatile methyl mercaptan after using the halitosis removing methods (p<0.05). According to the above results, tooth brushig and mouth gargling are effective ways to reduce halitosis.

• Korean Journal of Clinical Laboratory Science
• /
• v.41 no.4
• /
• pp.189-195
• /
• 2009

Lung cancer is a type of cancer with high mortality; its 5-year survival rate is at a low 14%. Related cytological tests include sputum, bronchial brushing, bronchial washing and fine needle aspiration cytology test etc. From the test specimens in which sputum, bronchial brushing, bronchial washing, and fine needle aspiration cytology were performed, the sensitivity, specificity and accuracy between cytology test and histology test. In the sputum test, sensitivity was 27.71% and specificity was 98.02%, and the bronchial brushing test showed sensitivity of 93.33% and a specificity of 91.3%. The bronchial washing test was a sensitivity of 53.7% and its specificity was 98.9%, and the fine needle aspiration cytology test showed sensitivity and specificity were 88.46% and 72.97%, respectively. In the specimens diagnosed as normal at the sputum test, malignant diagnosis was found in 21 specimens of bronchial brushing, 30 cases of bronchial washings and 37 cases of fine needle aspiration cytology specimens. In the specimens diagnosed as normal at the bronchial washing test, malignant diagnosis was found in 5 specimens of sputum, 7 specimens of bronchial brushin and 1 cases of fine needle aspiration cytology. One specimens found to be normal in fine needle aspiration cytology turned out to maligant in sputum test. The result of this research shows that, in diagnosis lung cancer, a test method of high sensitivity and specificity should be pursued. However, depending on the location and malignancy of the illness, diagnosis may not be obtained in some cases. Therefore, we conclude that the cytological tests performed for lung cancer testing such as sputum, bronchial brushing, bronchial washing, and fine needle aspiration cytology should be carried out in a mutually complementary manner.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.106-121
• /
• 2007

The purpose of this study was to examine the effects of suggested etching method on the performance of pits and fissures sealant. In the first part, seventy extracted sound human permanent third molars and premolars were used. The teeth were randomly divided and performed in three different groups as follows : conventional etching, enameloplasty, and testing group. Non-pumicing, dye-guidance vigorous brushing-start etching technique was applied on the occlusal of testing group. Then the pit and fissure sealant was applied on all of the specimens. After the thermocycling and immersing in 1% methylene blue, the resin embedded sections were made. The microleakage data on the section were then recorded under the stereoscope and statistic analysis was done. Additional experiments were also performed : direct fissure surface etched pattern experiment, replica study, and micro-shear bond strength testing observation. The second part included two groups. A paired study was designed to evaluate the influence the environment has on the performance of the sealant. After etching, half of each occlusal surface received one of the two following treatments in succession: sealing in laboratory and intraoral condition (group 1), sealing in intraoral condition with and without a single-bonding agent (group 2). The results of present study can be summarized as follows: - The microleakage of testing group was significant different with conventional method (P<.05) and was not different with the enameloplasty group (P>.05). - The quality and quantity of etched enamel were improved. - Microshear bond strength of testing group was higher than control group (p<.05). - The environmental condition was influenced on the performance of the sealant. The testing etching method modified the capacity of the etching agent to penetrate into the pits and fissures, and simultaneous enhance their efficiency in vitro condition.

• Journal of Korean society of Dental Hygiene
• /
• v.21 no.2
• /
• pp.99-107
• /
• 2021

Objectives: To compare and evaluate the degree of abrasion of the denture base resin according to the type of denture cleansers. Methods: Denture base resin specimens were prepared and dried. The resin specimens were installed in the automatic brushing machine so that the toothbrush weighed 200 g. The brushing was performed 1,000 times each, a total of 10,000 times using (1) distilled water (DW), (2) non-abrasive cleanser (NAC), and (3) toothpaste (TP), respectively. Thirty specimens were allocated for each group. The thickness of abrasion by brushing was calculated by converting the weight of the specimen. Results: In all DW, NAC, and TP groups, significant differences were found in the average amount of abrasion of the resin specimen due to 1,000 to 10,000 brushings (p<0.001). The average abrasion amount of the resin specimen due to brushing 10,000 times was 2.31±1.20 ㎛ in DW group, 2.52±0.25 ㎛ in NAC group, 6.50±0.60 ㎛ in TP group, and the amount of abrasion in the TP group was statistically significant compared to other groups (p<0.001). Conclusions: The use of TP is not recommended as a method for maintaining the longevity of dentures and for oral health, and NAC was considered to be possible to be used as a denture cleanser because it had a similar amount of abrasion of that of DW.

• Korean Journal of Metals and Materials
• /
• v.49 no.5
• /
• pp.380-387
• /
• 2011

Wire brushing, which is a typical surface preparation method for roll bonding, has recently been highlighted as a potentially effective method for surface nanocrystallization. In the present study, the microstructure evolution and hardness of the wire-brushed surface and roll-bonded interface of a 1050 aluminum sheet were investigated. Wire brushing formed protruded layers with a nanocrystalline structure and extremely high surface hardness. After roll bonding, the protruded layers remained as hard layers at the interface. Due to their hardness and brittleness the interface hard layers, can affect the interface bonding properties and also play an important role determining the mechanical properties of multi-layered clad sheets.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.409-418
• /
• 2011

Objective: This study was performed to evaluate the child-care teachers' job in relation to physical work. Background: Child-care teacher is directly related to the quality of child care. And their physical activity is higher than general education teachers because the proportion of day care is high. But analyzes of child-care teachers' job burdens and the work environment associated with physical activity is not well established. Method: To conduct this study, the child-care teachers' job was classified into 18 physical works. After classification, posture was evaluated by ergonomic posture evaluation schemes of OWAS, RULA, REBA and evaluated for each physical part. Next, musculoskeletal subjective symptoms were analyzed. Results: The results showed the following: The highest assessment on the posture evaluation was "helping children to ride a school bus", "feeding: meal/snack", "brushing children's teeth" and "arrangement of nap-stuff". The rank of high-risk assessment on the neck/trunk/leg part was arranged by: "feeding: meal/snack", "helping children to ride a school bus", "making nap", "arrangement nap-stuff" and "brushing children's teeth". The rank of high-risk assessment on the upper limbs part was arranged by: "helping children to ride a school bus", "the bust - group activity", "meal/snack time - preparing, feeding, arrangement", "nap time - preparing, arrangement", "brushing children's teeth", and "using the toilet". According to the results of each musculoskeletal subjective symptom, teachers ordered the pain area as follows: waist, shoulder, leg/feet, and neck, and they showed more pain on trunk than the upper limbs. Conclusion: To sum up the results from ergonomic posture evaluation and a subjective symptom, the following are high working pressures: "feeding: meal/snack", "the bust - group activity", "making nap", "brushing children's teeth" with deep bending and waist twisting, "helping children to ride a school bus", "brushing children's teeth" with lifting shoulder; "meal/snack time - preparing, arrangement", "nap time - preparing, arrangement", and "using the toilet" with moving or an up-down position in their job. Application: The results of this study might be information for improvement of the child-care teachers' job environment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1077-1081
• /
• 2007

Thermal expanded core (TEC) fiber can reduce, being advantaged from thermal diffusion technology, connection loss by expanding the tolerance in relation to axial offset and gap when making optical connection having mode field diameter (MFD) of optical fiber expanded locally. In this paper, TEC fiber fabrication system based on the frame brushing techniques using twin-torch tip was designed and developed in order to maintain a stable thermal diffusion and single-mode when manufacturing TEC fiber. We were able to obtain that varied kinds of TEC fibers of which MFD could have been extended between $20\;{\mu}m$ and $40\;{\mu}m$ by TEC fiber fabrication system. In addition, the characteristic of connection loss was measured by alignment two TEC fibers of which MFD was $30\;{\mu}m$.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.189-195
• /
• 2004

The purpose of this research is to evaluate and compare the plaque removal ability of sonic brushing and manual brushing in order to present a method for continuous and effective oral hygiene control during orthodontic treatment. Nonextracted adolescent patients (male: 23 persons, female: 37 persons) and adult patients (male: 15 persons, female: 45 persons) outfitted with a fixed orthodontic appliance from their incisors to second molar, in both the maxilla and mandible, were divided into manual brushing and sonic brushing groups. A Philips oral healthcare HX-4401 sonic toothbrush was used, and the application of brushing for the two groups was standardized at two minutes. After brushing, the plaque score was measured with a modified Wilkin's PHP. The following results were achieved after comparing each group's plaque score. 1. In patients with a fixed orthodontic appliance when age was not accounted for, the application of sonic brushing exerted a beneficially decreased effect on the plaque score. (adolescents : p<0.01, adults: p<0.05) 2. When comparing the adolescent and adult groups in regard to plaque score, the adolescent group showed a more decreased effect. 3. When using the same toothbrush type, there was no difference between the adolescent and adult groups.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.285-293
• /
• 2018

This study aimed to evaluate the effect of height suppression of cucumber and tomato plug seedlings as affected by mechanical stimulus using brushing as environment-friendly method. Cucumber (Cucumis sativus L. 'Joeunbaekdadagi') and tomato (Solanum lycopersicum L. 'Mini Chal') seeds were sown in 40-cell plug trays ($54{\times}27.5{\times}5cm$) filled with growing medium on Oct. 9, 2017. The cultivation environment in a venlo-type glasshouse was maintained as cultivation temperature range of $15-25^{\circ}C$ and the relative humidity of $50{\pm}10%$. Nontreatment and diniconazole ($7.5mg{\cdot}L^{-1}$) application at 15 days after sowing were used as the control. In addition, brushing treatments in cucumber and tomato were applied interval of 2, 4 or 6 hrs for 15 and 20 days, respectively. Plant height, hypocotyl length, and internode length were inhibited for cucumber and tomato in the diniconazole treatment than in the control. The leaf size was reduced, both cucumber and tomato, while the SPAD increased under the diniconazole treatment. However, stem diameter of cucumber was the thickest in the 2 hrs brushing interval treatment. Fresh weights of shoot and root were the significantly lowest in the diniconazole treatment. Application of brushing improved seedlings quality by promoting dry weights of shoot and root, and compactness of tomato seedlings. The chlorophyll fluorescence of tomato seedlings drastically decreased with 2 hrs treatment, indicating that mechanical stress by brushing treatment. The relative growth rate of tomato seedlings was significantly lower in the diniconazole treatment, but cucumber seedlings were not significantly different in all treatments. As a results, height suppression of cucumber and tomato seedlings was best achievement in the diniconazole treatment by the chemical as growth regulator. In an environment-friendly point of view, however, it is considered that 2 hrs brushing interval treatment can be the applicability for replacing the chemical methods in plug seedling growth of cucumber and tomato.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.15 no.3
• /
• pp.342-349
• /
• 2008

Purpose: This study was done to develop data for a hygiene promotion program for elders living on rural islands. Method: Self-administered questionnaires were used to collect data. Results: Most of the elders reported brushed their teeth and washing their faces twice a day. For other types of washing, 98.8% of reported washing their hands after the toilet and 22.8% reported washing their anus after defecation. Most of the elders reported changing their underwear two to three times a month and cutting their nails more than four times a month. Itchiness was reported by 24%. There were significant differences according to age for teeth brushing, face washing, shampooing, bathing, washing hands after the toilet, and cutting nails. According to sex, there were significant differences in teeth brushing, face washing, washing hands after using the toilet, washing anus after defecation, changing underwear, cutting nails, and feeling itchy. The elders showed significant differences in bathing, changing underwear, and cutting nails according to subjective economic status. They showed significant differences in teeth brushing and changing underwear when they lived with their families. Conclusion: In order to develop a proper hygiene promotion program for the elderly, their age, sex, and physical condition should be considered as well as their environmental, economical, and geographical condition.