• 산업경영시스템학회지
• /
• 제26권1호
• /
• pp.74-78
• /
• 2003

This paper is an investigation of comparative and contrasting characteristics of service in manufacturing sector - especially quality aspects. A review of both service and manufacturing industries' systems literature revealed conflicting views on defining two different industries and its system assessment. While some researchers have documented the value of service IS implementations on both industries, there are others who feel that such implementations are not appropriate for all situations or all organizations. Because of IS implementations and IT improvement, defining service and manufacturing is blur than ever. There is a dearth of literature on the assessment of service systems in service and manufacturing industries due to blurred and controversial argument.

• 한국시뮬레이션학회논문지
• /
• 제14권2호
• /
• pp.15-24
• /
• 2005

The goal of a distributed simulation such as battle field simulation is to combine all kinds of simulations in the same synthetic environment and to make people interact at the same time. It is a key issue to share the same synthetic environment among simulations. To support reusability and affordability in the modeling and simulation area, DMSO(Defense Modeling and Simulation Office) of USA developed concepts such as HLA(High Level Architecture) and SEDRIS (Synthetic Environmental Data Representation and Interchange Specification). In the industrial simulation area, the digital manufacturing is the main stream. To reduce cost and to reuse simulation environment, the standardization becomes the focus of digital manufacturing. This study proposes to use SEDRIS to improve interoperability of manufacturing data. The simulation data of DELMIA, which is a leading commercial digital manufacturing solution, is mapped and translated into the SEDRIS transmittal format. Mapping of the manufacturing simulation data and the synthetic environment are implemented and verified through experiments.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.33-40
• /
• 1998

In recent domestic automotive industry, applications of computer simulation to the manufacturing of stamping dies for inner and outer body panels which greatly affect durability and aesthetic quality of automobiles, have been increased. Enhancement of die quality, and reduction of total die manufacturing time and consequently manufacturing cost are the visible outcome. However, to successfully apply the result of simulation by a commercial package to the die manufacturing, development of an optimal die manufacturing process is required upon the completion of analysis of forte and shortcomings of available sheet metal forming softwares in the market. Based on the results of numerical analysis of front door outer panel forming, this paper evaluates the applicability of simulation results to the real die making for automotive body panels. Also, it attempts to select an optimal die manufacturing process including design, machining and tryout. Lastly, it discusses the expected effects by adopting the selected process in a real stamping die manufacturing facility.

• 산업공학
• /
• 제25권1호
• /
• pp.71-78
• /
• 2012

Most manufacturing companies participate in various types of active collaboration to enhance competitive advantages in their arenas. In this paper, we introduce a data warehouse system that is designed for manufacturing collaboration. Just as enterprise information systems, collaboration support systems also need functions of performance measurement and monitoring. For this reason, we devise a new approach to measuring and evaluating performance of manufacturing collaboration. Specifically, we first present a concept of process warehouses for manufacturing collaboration. Next, we design a data schema of collaborative process warehouses to store and monitor collaboration performances. Finally, we implement a prototype system to support performance management of manufacturing collaboration. The proposed system can be used to effectively maintain and continuously improve collaboration in manufacturing industry.

• 산업공학
• /
• 제24권4호
• /
• pp.330-340
• /
• 2011

This research aims at conducting a comparative study on the relative efficiency of technologically innovative activities between manufacturing and service industries using data envelopment analysis (DEA). First, as an individual approach, efficiency of technologically innovative activities between manufacturing and service industries is separately evaluated. The results show that efficiency of both industries is similarly low, but patterns of technologically innovative activities differ from each other. Manufacturing industries usually do innovation focusing on various outputs with a single input, whereas service industries tend to do innovation emphasizing on a single output with mixed inputs. Second, as a holistic approach to both industries, efficiency is collectively assessed. The analysis demonstrates that efficiency of service industries is higher than that of manufacturing industries, and there are similar patterns of technologically innovative activities between both manufacturing and service industries. This study provides industrial managers with policy implications based on similarities and differences between manufacturing and service industries.

• 한국정보시스템학회지:정보시스템연구
• /
• 제31권1호
• /
• pp.25-58
• /
• 2022

Purpose The purpose of this study is to analyzes the RPA fitting processes by the casese of manufacturing SMEs(Small and Medium-sized Enterprises) in an exploraty approach. Based on the findings on the RPA fitting processes, we intend to provide a cornerstone for developing a general-purpose RPA introduction model in the future. Design/methodology/approach In this study, empirical cases of RPA fitting processes were analyzed based on interviews with project managers of specialized IT suppliers in charge of RPA development and managers of IT departments of manufacturing SMEs that actually introduced RPA. In order to explore various RPA fitting process in the manufacturing value chain, a total of 7 manufacturing SMEs were interviewed, ranging from companies using a legacy system to companies without a legacy system. Over the primary and secondary activity processes, the details of RPA processes were analyzed in the steps of 'Frequency Identification, Input Processing, Source Identification, Inquiry and Processing, Information Registration, Result Reporting'. Findings From the analysis, we derived some exploratory results that the processes over 0.25 FTE and related with many suppliers and clients are fitting for RPA introduction in manufacturing SMEs Our results will provide basic data for the development of the future general-purpose RPA introduction model for manufacturing SMEs, providing practical reference for RPA introduction.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.1-8
• /
• 2022

Fused deposition modeling (FDM), based on stacking a continuous filament of polymer or composite materials, is well matured and is thus widely used in additive manufacturing technology. To advance FDM-based 3D printing technology, the mechanical properties of additively manufactured composite materials must be improved. In this study, we proposed a novel FDM 3D printing process using metal wire-polymer composites, enabling enhanced mechanical properties. In addition, we developed a new type FDM filament of copper wire wrapped in nylon material for stable 3D printing without thermal damage during the printing process. After FDM printing of the copper wire-nylon composite filament, we conducted a tensile test to investigate the mechanical behavior of the printed composite materials. The experimental results confirmed that the tensile strength of the 3D-printed metal wire-polymer composites was higher than that of the conventional single polymer material. Thus, we expect that the FDM printing process developed in this study may be promising for high-load-bearing applications.

• 한국기계가공학회지
• /
• 제6권4호
• /
• pp.92-97
• /
• 2007

A temporary structure is a framework of metal poles and planks, used as a working platform from which building repairs or construction can be carried out safety. The manufacturing process of the existing model consumes a many hour. So, it is modified manufacturing process. In this study, it is attempted to find out the shape of modified working platform considering manufacturing process and using Taguchi method, and it reduces production process. The design parameters are defined to discribe shape of model. As a result of the shape design, maximum Von-Mises stress and displacement considering a safety factor were satisfied with CTEA (Construction Temporary Equipment Association of Korea) standard.

• Journal of Information Processing Systems
• /
• 제16권6호
• /
• pp.1271-1280
• /
• 2020

The yield and quality of a micromanufacturing process are important management factors. In real-world situations, it is difficult to achieve a high yield from a manufacturing process because the products are produced through multiple nanoscale manufacturing processes. Therefore, it is necessary to identify the processes and equipment that lead to low yields. This paper proposes an analytical method to identify the processes and equipment that cause a defect in the plastic ball grid array (PBGA) during the manufacturing process using logistic regression and stepwise variable selection. The proposed method was tested with the lot trace records of a real work site. The records included the sequence of equipment that the lot had passed through and the number of faults of each type in the lot. We demonstrated that the test results reflect the real situation in a PBGA manufacturing process, and the major equipment parameters were then controlled to confirm the improvement in yield; the yield improved by approximately 20%.

• 한국결정성장학회지
• /
• 제28권5호
• /
• pp.217-221
• /
• 2018

Selective laser melting(SLM)은 적층 제조 방법 중 하나로서, 분말을 선택적으로 용융하여 기능적이고, 복잡한 형상을 즉각적으로 제작 가능하다는 장점이 있다. Ti-6Al-4V 합금의 경우 높은 융점과 산화문제로 인하여 SLM 공정도입에 어려움을 겪고 있다. 본 연구에서는 SLM 장비를 사용하여 Ti-6Al-4V 파트를 성공적으로 적층하였으며 스캔속도, 레이저 파워의 변수를 조절하여 적층 가능 조건을 도출하였다. 또한 적층 된 Ti-6Al-4V 파트의 형상 정밀도, 면밀도 및 기계적특성 평가를 통하여 일반적으로 사용되는 공정조건(스캔 속도 200~700 mm/s)으로 제작된 제작품 물성치와 비교를 통해 Ti-6Al-4V 합금의 고속 적층 영역에서의 최적 공정을 확립하였다.