• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1671-1683
• /
• 2016

Locally repairable codes (LRCs) constitute an important class of codes for distributed storage, where repair efficiency is a key metric of system performance. In LRCs, efficient repair is achieved by small locality-number of nodes participating in the repair process. In this paper, we focus on situations where different locality is required for different nodes. We present a non-trivial extension of the recent results on multiple (or unequal) localities to the $r,{\delta}$-locality case. A new Singleton-type minimum distance upper bound is derived and an optimal code construction is provided. While the result is limited to the case of only two different localities, it should be noted that it can be directly applied to the more general case where the localities are specified not exactly but by upper limits.

• Food Science and Preservation
• /
• v.31 no.1
• /
• pp.46-63
• /
• 2024

This study evaluated the impact of storage temperature on the quality characteristics of texturized vegetable protein (TVP). TVP was prepared by mixing defatted Daewon soybean flour at 80℃, gluten, and corn starch in a 5:3:2 ratio, which was then extruded at a screw speed of 250 rpm and a barrel temperature of 190℃ with moisture addition at 9 rpm. Subsequently, the extruded TVP was vacuum-sealed in polyethylene packaging and stored at -20℃, 0℃, and 4℃ for 9 days. Texture analysis revealed that the curing rate followed 4℃ > 0℃ > -20℃ sequence. No significant color variation was observed across the storage conditions, although water content increased at all temperatures. Notable changes were detected in moisture absorption capacity (%) and solid leaching (%), following the order of -20℃ > 0℃ > 4℃. The turbidity of the solution released during cooking varied, with the highest to the lowest sequence being -20℃ > 4℃ > 0℃, while pH levels remained neutral. Regarding free amino acids, sweetness and textural quality improved with storage across all temperatures, whereas bitterness components diminished at 4℃. The study suggests that refrigerated storage at 4℃ is a viable method for distributing TVP, which was previously distributed only in a frozen and dry state.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.50-57
• /
• 1999

Structural analysis of large-scale structures involving large amount of computational load and data storage requires high-performance computing resources. We have previously developed PC-level distributed structural analysis algorithms based on substructuring technique where each personal computer assigned to a slave node has been involved in the computations for single substructures. Recently, it has been proved by the authors that the performance of distributed structural analysis algorithm can be further enhanced by changing substructuring schemes. Therefore a new distributed structural analysis algorithm with one PC to multiple substructures scheme is presented in this paper. The algorithm is implemented on the network of multiple personal computers and applied to structural analysis of two dimensional frame structures.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.99-101
• /
• 2014

다양한 응용 분야에서 대량의 데이타 저장이 빈번해 짐에 따라 분산 파일 시스템에 대한 효용성이 커지고 있으며, 이로 인해 수많은 분산 파일 시스템이 개발되고 있다. 이러한, 분산 파일 시스템의 효율성을 검증할 수 있는 방법에 대한 필요성이 커지고 있다. 또한, SSD와 같은 우수한 성능을 가지는 장치를 사용하는 분산 파일 시스템에서는 SSD와 같은 장치의 효율성을 보기 위한 복잡한 워크로드를 생성 하여 시험할 수 있어야 한다. 하지만 기존의 입출력 시험 도구에서는 복잡한 상황을 시험하는 것이 매우 어렵다. 따라서, 본 논문에서는 필요에 따라 파일의 분포에 따라 다른 입출력 패턴을 가지는 여러 부하 상황을 생성이 가능하며, 웹을 통해 손쉽게 시험할 수 있는 분산 파일 시스템을 위한 웹기반 워크로드 생성기를 개발하였다.

• Electronics and Telecommunications Trends
• /
• v.37 no.3
• /
• pp.85-96
• /
• 2022

Recently, the blockchain technology, which can decentralize business ecosystems using secure transactions without trusted intermediaries, has been spotlighted. Full nodes play an important role in maintaining decentralization in that they independently verify transactions using their full historical transaction data. However, the storage requirement of a full node for storing historical data is continuously increasing, and thus, has become harder for users to run a full node due to the heavy price for storage costs. In this paper, we investigate research trends on reducing the costs of storing blockchain transaction data so that nodes with low storage requirements can be used in the blockchain network.

• Korean Journal of Human Ecology
• /
• v.17 no.5
• /
• pp.989-999
• /
• 2008

The purpose of this study was to supply the basic data for the plan of the storage space in the kitchen by investigating the actual condition of the use and residents' satisfaction. The questionnaires were distributed to 136 families of the local apartment in South Chung-Cheong Province of Korea. The results were summarized as follows; first, among the furniture for storage, the upper and lower space have been installed in every furniture. The general tablewares were stored in the upper part of the kitchen and the frequently used goods for cooking were largely stored in the lower part. Second, in the method of reforming the kitchen space, it showed highest figure in case of purchasing the shelf and there were many cases of storing things by using the subsidiary storage furniture and boxes and it came to the conclusion that the housewives have a tendency to solve the storage problem by using the less expensive, simple and passive ways. Third, in the degree of satisfaction for the space for storage, it showed that the respondents were a little bit dissatisfied with the size of storage space, the position of furniture for storage, the convenience for using and the storage rapacity. Among the furniture for storage in the kitchen, the degree of satisfaction for the upper and lower parts was a little bit low, but it is higher for the others. For the plan of storage space, the aesthetic appreciation reflects visually being in order was considered to be the important factor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.1
• /
• pp.90-96
• /
• 2019

Storage cabinet in a lab in these days measures various environmental factors in real-time with IoT sensors. Preexisting system collects sensor data, analyze a risk and then command other equipment. Such centralized control system tends to have an issue with of speed slowing down. It's because when there are more storage cabinets, there are more data to process. In order to solve this issue, this report addresses decentralized IoT sensor based lab safety control system. It can analyze internal state of storage cabinet to identify any hazardous situations and effectively control them. Such decentralized control system using sensor modules for internal environment of the cabinet storage and automated control algorithm based on administrator's log history can manage any hazardous situations by automated control of environment factors of inside a lab. It would allow users to deal with a hazard if it happens. Even better, it can prevent it to happen from the beginning.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.2
• /
• pp.94-100
• /
• 2016

A virtual power plant (VPP) technology is a cluster of distributed generation installations. VPP system is that integrates several types of distributed generation sources, so as to give a reliable overall power supply. Virtual power plant systems play a key role in the smart grids concept and the move towards alternative sources of energy. They ensure improved integration of the renewable energy generation into the grids and the electricity market. VPPs not only deal with the supply side, but also help manage demand and ensure reliability of grid functions through demand response (DR) and other load shifting approaches in real time. In this paper, utilizing a variety of distributed generation resources(such as emergency generator, commercial generator, energy storage device), activation scheme of the virtual power plant technology. In addition, through the analysis of the domestic electricity market, it describes a scheme that can be a virtual power plant to participate in electricity market. It attempts to derive the policy support recommendation in order to obtain the basics to the prepared in position of power generation companies for the commercialization of virtual power plant.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.1
• /
• pp.13-18
• /
• 2011

More and all-electric aircraft (AEA) carry many loads with varied functions. In particular, there may be large pulsed loads with short duty ratios which can affect the normal operation of other loads. In this paper, a converter with spilt capacitors and an improved adaptive controller is used as the Voltage Bus Conditioner (VBC) with the reduced capacitive storage to mitigate the voltage transients on the bus. The proposed converter allows the smaller capacitive storage. Also, the proposed controller has the advantage of requiring only one sensor and performing both the functions of mitigating the voltage bus transients and maintaining the level of energy stored. Experimental results are presented which verify the control principles and demonstrate the practicality of the approach.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.391-396
• /
• 2012

The Voltage Bus Conditioner(VBC) is a bidirectional DC-DC converter for damping the instability and any transients of the bus voltage in a DC Distributed Power System(DPS). In this paper, a PI controller for the VBC has been designed for the frequency domain. The proposed PI controller not only dampens the bus transients, but also keeps the storage voltage level. Simulation by Matlab/Simulink and experimental results are presented for the validity of the proposed control technique.