• 한국자기학회지
• /
• 제26권4호
• /
• pp.137-141
• /
• 2016

전력의 효율적인 사용과 에너지 절감을 위한 비접촉 전류측정에 대한 요구가 커지고 있다. 본 연구에서는 무선 비접촉 측정을 가능하게 하는 2개의 결합코일과 전류의 인가에 의해서 인덕턴스가 변화하는 센서코일을 이용한 공진회로를 구성함으로써, 인가되는 전류의 크기에 따라 공진주파수가 변화하는 것을 이용한 비접촉 전류센서를 제안한다. 센서코일의 인덕턴스는 외부에 자석을 부착함으로써 부여되는 바이어스 자계에 의해서 자계(전류)의 크기뿐 아니라 방향을 판단할 수 있었다. 본 연구에서 구성한 비접촉 전류측정장치를 이용하여서 -3~+3 A의 전류를 측정하였을 때 18 V의 출력전압변화를 얻을 수 있었으나, 전류에 대한 출력특성은 선형적이지 않았다. 본 연구에서 제안하는 비접촉 전류측정방법(장치)를 보다 현실화시키기 위해서, 향후 출력신호의 선형화와 분해능의 엄밀한 검토가 필요하다.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.27-32
• /
• 2010

The OMM(On-Machine-Measurement) system has many advantages compare to conventional measurement in the way the time and cost. But, the sensor suitable to OMM system is restrictive use. Touch trigger probe sensor has long time for measurement and non-contact sensor has directional demerit. Because the long mechanical parts such as gear and lead screw for pump, injector and machine tools has big and heavy, unclamp and transferring for measurement in machining process is very difficult. This paper presents a development of ultra miniature eddy current displacement sensor with 3 axes for On-Machine-Measurement system. The accuracy of the sensor is experimentally proved in the grinding machine. In experimental results, the accuracy has under ${\pm}5\;{\mu}m$.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.297-303
• /
• 2022

Multiple fiber Bragg gratings (FBGs) have been proposed and demonstrated for gas-flow measurements in a flow channel, using the temperature-difference method. This sensor consists of two FBG temperature sensors and two coil heaters. Coil heaters are used to heat the FBGs. The flow rate of the gas can be obtained by monitoring the difference in the Bragg-wavelength shifts of the two FBGs, which has features that exclude the effect of temperature fluctuations. In this study, experiments are conducted to measure the wavelength shift based on the flow rate, and to evaluate the gas-flow rate in a gas tube. Experimental results show that the sensor has a linear characteristic over a flow-rate range from 0 to 25 ℓ/min. The measured sensitivity of the sensor is 3.2 pm/(ℓ/min) at a coil current of 120 mA.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.628-634
• /
• 2016

This paper demonstrates a microfluidic electrochemical sensor for detecting endocrine disruptor such as estradiol at a very low concentration by using preconcentration technique. In addition, self-assembled monolayer(SAM) was also employed on the working electrode of the electrochemical sensor in order to increase the estradiol capture efficiency of the sensor. SAM treatment on the working electrode enhanced the specific binding between the surface of the working electrode and the estradiol antibody. The estradiol antibody was applied on the working electrode at different concentrations(10, 20, 50, 100, 200 pg/ml) for observing the concentration dependency. The measured electrochemical redox current changed with the amount of the bound estradiol on the Au working electrode surface and the sensor can detect all the target material when the immobilized antibody amount is more than the estradiol amount in the water. The elecrochemical estradiol sensor without SAM treatment showed a low current of 7.79 nA, while the sensor treated with SAM resulted in 339 nA at 200 pg/ml, which is more than 40 fold higher output current. When combining the preconcentration technique and the SAM-treated electrode, the measured current became more than 100 fold higher than that of the sensor without neither SAM treatment nor preconcentration technique. The combination of these two techniques can would enable the proposed microfluidic electrochemical sensor to detect a very low concentration endocrine disruptor.

• 센서학회지
• /
• 제17권4호
• /
• pp.273-280
• /
• 2008

Monolith aperture-type oxygen sensors with simple structure of YSZ(pin-hole)/Pt/ YSZ(solid electrolyte)/Pt were fabricated by co-firing technique. To enhance the yield of productivity, a couple of YSZ green sheets for diffused barrier and solid electrolyte were prepared by tape-casting and co-firing method. The limit current characteristics of the oxygen sensors were measured between 500 and $650^{\circ}C$ The heating temperature of $600^{\circ}C$ was optimum as a portable oxygen sensor in the range of oxygen concentration from 0 to 75 vol%. Linear proficiency of limit current behavior as a function of oxygen concentration was controlled by the variation of aperture dimension. The fabricated oxygen sensors showed the stable sensing output for 30 days. Gas leakage in bonding area due to warping, cracking and thermal cycling was not found in the period.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2076-2081
• /
• 2008

In this study, a new concept of a flow sensor is developed using dielectric barrier discharge (DBD). Current of DBD generated between two electrodes is changed with varying flow rates. Therefore, it is possible to measure the flow rate by correlating generated DBD current with flow rates. The effects of flow rate, frequency, channel height, diameter of electrodes and distance between electrodes on the performance of the flow sensor using DBD are experimentally investigated.

• 센서학회지
• /
• 제25권5호
• /
• pp.349-353
• /
• 2016

Recently, research on bolometer-type uncooled infrared image sensor which is made for industrial applications has been increasing. In general, it is difficult to calibrate fixed pattern noise (FPN) of bolometer array. In this paper, average-current calibration algorithm is presented for reducing bolometer resistance offset. A resistor which is produced by standard CMOS process, on the average, has a deviation. We compensate for deviation of each resistor using average-current calibration algorithm. The proposed algorithm has been implemented by a chip which is consisted of a bolometer pixel array, average current generators, current-to-voltage converters (IVCs), a digital-to-analog converter (DAC), and analog-to-digital converters (ADCs). These bolometer-resistor array and readout circuit were designed and manufactured by $0.35{\mu}m$ standard CMOS process.

• 센서학회지
• /
• 제7권3호
• /
• pp.203-210
• /
• 1998

An experimental study of an eddy current nondestructive testing system to measure dimensions of cylindrical metallic rods, such as cross-sectional area or diameter, is presented. Impedance characteristics of a solenoid sensor, which are generally based on Maxwell's equations in electromagnetic field, are briefly discussed for inspecting geometrical parameters of the coil sensor and testing materials. A measurement system for detecting the diameter of the metallic rod is implemented. This instrument has capabilities for detecting the sensor output signals and estimating demensions of the testing material, continuously. As a result, it was shown that the eddy current sensor with an encircling coil could estimate the diameter of metallic rod. The implemented measurement system gives accurate information for inspecting the dimension of conducting rod with good sensitivity.

• 전기전자학회논문지
• /
• 제20권4호
• /
• pp.373-377
• /
• 2016

열전 변환 에너지 하베스팅을 위한 저 전력 부스트 컨버터에 사용하는 새로운 Zero Current Sensor (ZCS)를 이 논문에서 제안한다.새로 제안하는 ZCS를 사용하는 Zero Current Switching은 기존 방식인 아날로그 비교기를 사용한 Zero Current Switching방식 보다 파워 측면에서 큰 장점을 보이고 기존의 다른 방식인 딜레이 라인을 이용하는 Zero Current Switching 방식보다 면적에서 큰 장점을 보인다. 새로운 ZCS는 기존의 아날로그 비교기에 고의적으로 offset을 발생시키고 offset의 양을 digital code로 calibration 하여 출력이 나오는 시간을 조절한다. 새로운 ZCS를 이용한 Zero Current Switching은 기존의 아날로그 비교기를 이용한 Zero Current Switching 보다 대략 10배정도 적은 파워를 사용하면서 같은 성능을 보인다.

• 제어로봇시스템학회논문지
• /
• 제6권3호
• /
• pp.284-290
• /
• 2000

The measurement of electric current using optical techniques provides a number of important practical advantages including effective isolation from high line potentials and freedom from the saturation effects observed in conventional current transformers. In this work the optical current sensor which uses thin YIG(Yittrium Ion Garnet) film as a Faraday element has been developed. We have characterized this optical current sensor and implemented it to the OOCR(Opto-electronic OverCurrent Realy) Performance of the OOCR shows the possibility of replacing the present overcurrent relays with OOCR.