• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.1-4
• /
• 1987

A cotroller is designed and implemented for a 4-axis SCARA type assembly robot. The controller is developed for velocity control and precise position control of the AC servo motor and a robot language SNUL-87 is designed using c-language , which is oriented towards an intelligent robot system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.407-409
• /
• 1996

The Direct Arm(DDA) is a SCARA typed direct drive manipulator with three degree of freedom(DOF) using the direct motor of the NSK company. In the paper, we propose a convenient interface for the SCARA-type robot which is practical to use. The proposed Visual Robot Teaching Mode using 3D graphics replaces the current teaching box. And besides this graphical teaching software can be implemented on the PC which is company used as a robot controller. This program was developed for the Windows 95 OS.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.339-350
• /
• 2001

To overcome problems in tracking error related to the unmodeled dynamics in the high speed operation of industrial robots, many researchers have used sliding mode control, which is robust against parameter variations and payload changes. However, these algorithms cannot reduce the inherent chattering which is caused by excessive switching inputs around the sliding surface. This study proposes a fuzzy-sliding mode control algorithm to reduce the chattering of the sliding mode control by fuzzy rules within a pre-determined dead zone. Trajectory tracking simulations and experiments show that chattering can be reduced prominently by the fuzzy-sliding mode control algorithm compared to a sliding mode control with two dead zones, and the proposed control algorithm is robust to changes in payload. The proposed control algorithm is implemented to the SCARA (selected compliance articulated robot assembly) robot using a DSP (digital signal processor) for high speed calculations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.231-232
• /
• 2007

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.275-278
• /
• 1987

In this paper, a programming system for SCARA-type robots is designed, consisting of robot language, computational facilities and programming tools for handling interconnection environments. In designing the robot language, CLRC(C Library for Robot Control) is introduced, using the general-purpose language 'C' as base programming language. Also the motion primitives for Continuous Path control as well as Point-To-Point motion arc included. By means of frame and homogeneous transformations the system is capable of applying the SCARA-type robot efficiently and easily for any given task.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.776-778
• /
• 1997

We propose a remote controller for a SCARA typed direct drive manipulator with two degrees-of-freedom(DOF). A remote controller system for SCARA robot of DDA is designed using a 2 DSP (TMS320c31) board and Winsock(Internet program class library supplied by Microsoft). The design objective of the system is to implement real time dynamic control algorithms which have been tested only by simulations so far and remote control regardless of the distance between user and robot. Because this system runs on Win95, we developed a VxD program to communicate with DSP controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.111-116
• /
• 1998

In this study, we try to coincide virtual robot system in an OLP(off-line programming) with actual robot system even though kinematic differences between them are made. The virtual robot in the OLP may be modeled according to kinematics of the actual robot system. However, it is a complicated problem to find exactly all kinematic parameters of actual robot and environment. In this paper, an automated calibration method is proposed In order to find some kinematical parameters which are necessary for the modeling of a robot and environment in the OLP. It is applicable to SCARA robot for assembly task. In this method, a well-marked worktable of environment Is regarded as reference coordinate frame. The robot detects some marks on the worktable through sensors attached to the end-effector. The necessary parameters are calculated from the data of the robot joint variables when the robot detects the mark. The model in the OLP is modified by the parameters.

• 대한전기학회논문지
• /
• 제37권8호
• /
• pp.570-578
• /
• 1988

In order for a robot to carry out a precise assembly task with compliant motion, a force/torque sensor is needed. The output of the cross-bar structured force / torque sensor which is used in a peg-in-hole insertion task and attached to a SCARA type robot, is analzed. First, the relationship between the sensor outputs and the force / torque components obtained by the outputs is investigated. Second, in a peg-in-hole insertion task, the sensor outputs changing with the contact position of the peg and the hole, are analyzed. Also, the relative position of the peg and the hole is obtained from the sensor outputs. The peg-in-hole insertion task is successfully executed, using a SCARA type robot with a wrist force / torque sensor manufactured in our laboratory and the compliance algorithm from the results of this paper.

• 제어로봇시스템학회논문지
• /
• 제6권4호
• /
• pp.285-294
• /
• 2000

This paper shows that the proposed fuzzy-sliding mode control algorithm for a SCARA robot could reduce the chattering due to sliding mode control and is robust against a change of payload and parameter uncertainties. That is, the chattering can be reduced by changing control input for compensating disturbances into a control input by fuzzy rules within a pre-determined dead zone. The experimental results show that the chattering can be reduced more effectively by the fuzzy-sliding mode control algorithm than the sliding mode control with two dead zones. It is proved experimentally that the proposed control algorithm is robust to a change of payload. The proposed control algorithm is implemented to the SCARA robot using a DSP(board) for high speed calculations.

• 전자공학회논문지S
• /
• 제35S권2호
• /
• pp.58-69
• /
• 1998

A contrp; suste, fpr SCARA robot is designed for implememting a robust dynamic control algorithm. this study forcuses on the use of DSPs in the design of joint controllers and interfaces in between the host cotroller and four joint controllers and in between the joint controllers and four servo drives. The mechanical body of SCARA robot and the servo drives are selected from the commercially available ones. The four joint controllers, assigned to each joint one by one, are combined into a common system through a mother board hardwarewise and through the global memeory softwarewise. The mother board is designed to connect joint controllers onto the board through the slots adopting PC/104 bus structures. And, the global memory stores the common data which can be shared by joint controllers and the host computer directly, which virtually combines the whole system into one. To demonstrate the performance and efficienty of the sytem, a robust inverse dynamic algorithm is proposed and implemented for a faster and more precise control. The robust inverse dynamic algorithm is basically derived from an inverse dynamci algorithm and a PID compensator. Based upon the derived dynamic equitions of SCARA robot, the inverse dynamic algorithm is intitially implemented within 0.3 msec of the control cycle in this system. The algoithm is found to be not accurate enough for the high speed and precision tasks due to inherent modelling errors and time-varying factors. Therefore, a variable PID algorithm is combined with the inverse dynamic algorithm to support robustness of control performance. Experimental datfor the proposed algorithm are presented and compared with the result obtained from PID and inverse dynamic algorithm.