• Journal of Life Science
• /
• v.30 no.3
• /
• pp.313-319
• /
• 2020

Recently, cattle epidemic diseases are caused by a pathogen such as a virus or bacterium. Such diseases can spread through various pathways, such as feed intake, respiration, and contact between livestock. Diagnosis based on the ELISA (Enzyme-linked immunosorbent assay) and PCR (Polymerase chain reaction) methods has limitations because these traditional diagnostic methods are time consuming assays that require multiple steps and dedicated equipment. In this review, we propose the use of the CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) Cas system based on DNA and RNA levels for early point-of-care diagnosis in cattle. In the CRISPR/Cas system, Cas effectors are classified into two classes and six subtypes. The Cas effectors included in class 2 are typically Cas9 in type II, Cas12 in type V (Cas12a and Cas12b) and Cas13 in type VI (Cas13a and Cas13b). The CRISPR/Cas system uses reporter molecules that are attached to the ssDNA strands. When the Cas enzyme cuts the ssDNA, these reporters either fluoresce or change color, indicating the presence of a specific disease marker. There are several steps in the development of a CRISPR/Cas system. The first is to select the Cas enzyme depending on DNA or RNA from pathogens (viruses or bacteria). Based on that, the next step is to integrate the optimal amplification, transducing method, and signal reporter. The CRISPR/Cas system is a powerful diagnostic tool using a gene-editing method, which is faster, better, and cheaper than traditional methods. This system could be used for early diagnosis of epidemic cattle diseases and help to control their spread.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.4 s.48
• /
• pp.711-734
• /
• 1994

Among chemical agents in herbicides, dioxin (2, 3, 7, 8-tetrachloro dibenzo-$\rho$-dioxin : TCDD), a chemical contaminant in herbicides sprayed during the Vietnam War has been known to be the major agent causing toxic effects. Approximately 320,000 korean soldiers participated the Vietnam War from 1964 to 1974. Although the potential hazards of the herbicides among Korean veterans exposed were implicated, the problem had not been a public issue until 1991 when Korean veterans were informed U.S. companies, the herbicides manufacturer payed fund, from which a trust fund for New Zealand and Australian Class members were established in 1985. After a series of appeals and demonstration by the Korean Veterans demanding medical care and compensation for their serious health damages, a bill of medical care and compensation for herbicides victims was promulgated in March 1993 and become effective from May 1993, This study was carried out with two major objectives : the first to understand the health problems caused from the herbicides by reviewing literatures published, and the second to examine the nature and extent of health impacts among Korean veterans exposed and to develop valid study methods for the major study by interviewing and reviewing records on a part of veterans (638 persons) registered and completed medical examination in Seoul Veterans Administration Hospital from June to October 1993. The results obtained are as followings: 1. The literature review of 107 papers revealed that 1) Dioxin is teratogenic, carcinogenic and affects almost all organs including nervous, endocrine, and reproductive systems in animal experiments. 2) The diseases showing evidence of causal association were Hodgkin's disease, non-Hodgkin's disease, lung cancer, lymphoma, soft tissue sarcoma, chloroacne and polyneuropathy when judged on the basis of consistency in study results and biological plausibility. 2. Interview and medical record review study on 638 veterans, though limited validity owing to lack of control group, crude estimates of dioxin exposure levels (no biomarkers measurable), and uncertainty of diagnosis, showed that: 1) Most of the study subject's were in their 40's of age and had been dispatched to Vietnam during the period from $1965{\sim}1970$ around one year. 2) Most frequently complained symptoms in medical examination were motor weakness (32%), sensory abnormalities in extremities (23%), skin diseases (22%), and pain in extremities (20%) whereas in Interview they were more frequent in order of skin problem (44%), motor weakness (38%), sensory abnormalities and pain in extremities(17% and 19% each). Kappa indices on the same category of complaints between two sources of information were variable and relatively low. 3) On medical examination, only a part of the 638 subjects had initial impression (442 pts) and final diagnosis (218 pts) suggesting decision making on diagnosis appeared to be difficult even with all available modern medical technologies: in initial impression disorders from peripheral and central neuropathy were predominant whereas in final diagnosis various types of skin disorder were most frequent 4) When dose-response relationship between several conditions (from questionnaire) and arbitrary exposure scores were examined by CMH linear trend test, spontaneous abortion, sexual problems and health problem of offsprings showed statistically significant linear trends. However, pregnancy, accident and suicidal attempts did not show any relationship in this study capacity. 5) Among complaints, psychosis and neurosis (anxiety, phobia) in interview study, and memory disorder and psychosis in medical record study revealed linear trend. 6) Skin disorder was the only condition showing linear trend in initial impression and none in final diagnosis on medical examination. Even though objective to select out dioxin-related disease or group of diseases from this study was not achieved the research experiences provided firm basis for developing various methodological approaches. 3. From this preliminary study we concluded that a larger scale major epidemiologic study on health impacts of herbicides among Korean veterans exposed is not only Indispensible but also well designed study with more valid exposure information and diagnosis may be able to establish causal relationship between certain groups of diseases and exposure to the herbicides among Korean veterans.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.399-406
• /
• 2000

The effect of inlay surface treatment on bonding was investigated when resin inlay was bonded to resin-modified glass-ionomer base with resin cement. For the preparation of glass-ionomer base, resin-modified glass-ionomer cement (Fuji II LC, GC Co., Japan) was filled in class I cavities of 7mm in diameter and 2mm in depth made in plastic molds. Eighty eight resin inlay specimens were made with Charisma$^{(R)}$ (Kulzer, Germany) and then randomly assigned to the four different surface treatment conditions: Group I, $50{\mu}m$ aluminium oxide sandblasting and silane treatment ; Group II, silane treatment alone ; Group III, sandblasting alone, and Group IV (control), no surface treatment. After a dentin bonding agent with primer (One-Step$^{TM}$, Bisco Inc., IL., U.S.A.) was applied to bonding surface of resin inlay and base, resin inlay were cemented to glass-ionomer base with a resin cement (Choice$^{TM}$, Bisco Inc., IL., U.S.A.). Shear bond strengths of each specimens were measured using Instron universal testing machine (4202 Instron, lnstron Co., U.S.A.) and fractured surfaces were examined under the stereoscope. Statistical analysis was done with one-way ANOVA and Dunkan's multiple range test. The results were as follows: 1. Sandblasting and silane treatment provided the greatest bond strength(10.56${\pm}$1.95 MPa), and showed a significantly greater bond strength than sandblasting alone or no treatment (p<0.05). 2. Silane treatment provided a significantly greater bond strength(9.77${\pm}$2.04 MPa) than sandblasting alone or no treatment (p<0.05). However, there was no significant difference in bond strength between sandblasting treatment and silane one (p>0.05). 3. Sandblasting alone provided no significant difference in bond strength from no treatment (p>0.05). 4. Stereoscopic examination of fractured surface showed that sandblasting and silane treatment or silane treatment alone had more cohesive failure mode than adhesive failure mode. 5. In relationship between shear bond strength and failure mode, cohesive failure occurred more frequently as bond strength increased.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.45-53
• /
• 2022

In order to improve the emission of diesel engines, natural gas-diesel dual fuel combustion compression ignition engines are in the spotlight. In particular, a reactivity controlled compression ignition (RCCI) combustion strategy is investigated comprehensively due to its possibility to improve both efficiency and emissions. With advanced diesel direct injection timing earlier than TDC, it achieves spontaneous reaction with overall lean mixture from a homogeneous mixture in the entire cylinder area, reducing nitrogen oxides (NOx) and particulate matter (PM) and improving braking heat efficiency at the same time. However, there is a disadvantage in that the amount of incomplete combustion increases in a low load region with a relatively small amount of fuel-air. To solve this, sensitive control according to the diesel injection timing and fuel ratio is required. In this study, experiments were conducted to improve efficiency and exhaust emissions of the natural gas-diesel dual fuel engine at low load, and evaluate combustion stability according to the diesel injection timing at the operation point for power generation. A 6 L-class commercial diesel engine was used for the experiment which was conducted under a 50% load range (~50 kW) at 1,800 rpm. Two injectors with different spray patterns were applied to the experiment, and the fraction of natural gas and diesel injection timing were selected as main parameters. Based on the experimental results, it was confirmed that the brake thermal efficiency increased by up to 1.3%p in the modified injector with the narrow-angle injection added. In addition, the spray pattern of the modified injector was suitable for premixed combustion, increasing operable range in consideration of combustion instability, torque reduction, and emissions level under Tier-V level (0.4 g/kWh for NOx).

• Journal of Elementary Mathematics Education in Korea
• /
• v.11 no.2
• /
• pp.177-197
• /
• 2007

This study discussed the climbing learning method which studied and practiced by Professor Saito Noboru. This is the learning method which is devised to know not only the relationship of the learning factors but the systemic or structural connection of whole studying contents- affects children's math learning ability through practical class to both the lower and the higher grades. To achieve the purpose of this study, these following issues were set; A. Develop the teaching and learning course of mathematics by applying the climbing learning method. B. Execute the mathematics lesson according to the climbing learning method and analyze the learning achievement. C. Analyze the difference between application of the climbing learning method and that of the learning method by student's level in mathematics. D. Analyze what the climbing learning method gives a shift of the recognition of learning mathematics. In order to accomplish these study issues, we analyzed the text book of math not only for children but also for teachers and developed the teaching and learning course applied the climbing learning method with advice of experts. It was chosen two different homogeneous groups each, third year for lower grade group and fifth year for higher grade group. It was done the experimental group lesson applying the climbing learning method and general lesson for the control group. After then, t-test against independent samples was done depending on the result of the student's assessment(T1, T2). These two groups' students were divided into smaller groups based on result of achievement level regardless of gender. These subgroups were confirmed the difference of learning ability between upper and lower level group. As regarding the result making out grades of faith and attitude for math, t-test was used on independent sample. At the same time, experimental groups were tested using learning attitude with the learning structure chart. Through this study the following results are obtained and the conclusion was drawn. Firstly, although applying the climbing learning method to the lesson does not have significant effect to the lower grade of elementary school student's achievement it has significant influence on the higher grade student's achievement. Second, as a result of analyzing the difference between the climbing learning method and the learning method by student's level in mathematics, it is of no beneficial effect to the lower grade both upper level and lower level. However, it has appreciable effect to the higher grade classes both upper level and low level. Especially, upper level students have higher effect than low level students. Third, climbing learning method does not affect to the faith and attitude of the lower grade students positively, but it has affirmative effect to the higher grade students'. As a result of the survey of the experimental groups which were applied to the climbing loaming method, the lesson by using the learning structure chart proved to be helpful to the both the lower and higher grade. The best advantage of using the learning structure chart, children say, is easily understood whole contents of studying and is useful for review. Furthermore, using the learning structure chart is more efficient compared with previous learning method and is given the successful result to self-directed learning. In conclusion, keeping up with the current of the thought of education, we suggest a scheme as a new teaching method from the constructive learning method which emphasize the self-directed learning.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.4 s.38
• /
• pp.133-156
• /
• 2005

This study clarifies the concept of the education content relevance in order to evaluate the content relevance of Technology & Home Economics in a secondary school, and design its standards based on the preceding study. In other words, four standards such as the amount of studying content, the degree of difficulty, the validity of contents and the sequence of contents are established. Also, a survey on the current status of nationwide units targeting students, teachers, and professors was conducted to collect actual data about relevance evaluation. The results are as follows. First, as for the evaluation in terms of the amount of studying content, the majority of respondents answered that it decreased by about $30\%$ when compared to the 6th Technology & Home Economics Curriculum However, middle school teachers pointed out that the number of classes is not enough considering the fact that it's an activity-oriented subject. So, they acknowledged that the amount of study time during a Technology Sl Home Economics class is 'quite a lot.' Second, the evaluation in the degree of difficulty is divided into two responses. Teachers responded that it's reasonable overall, but according to students, it's difficult. Especially, the chapters that students don't understand well including 'The Elements of Draftsmanship,"' 'Understanding of Machinery,' 'Electronics & Electricity Technology,' and 'Energy & Transportation Technology.' In the Home Economics area, 'The Design of Home Life' is the only chapter that students don't understand well. Third, as for the validity of contents, the chapters that were not considered as important considering the objective of Technology Sl Home Economics Curriculum include 'The Elements of Draftsmanship,' 'Computer & Processing,' and 'The Management of Resources and Environment.' Fourth, as for the sequence of contents, the survey was conducted including the name of the course asone of the survey items. The majority of teachers wanted it as it is, but the Professors of education colleges who wanted the 3rd name to connect the course with the elementary school course was a little more $(50.5\%)$ than the ones who don't want any changes $(45.5\%)$. The follow-up study should correct and complement the standards that this study suggested through analytic and critical review according to the character & goal of the subject. Based on such standards, the evaluation of content relevance should be continued to realize the quality control of the curriculum systematically.

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.373-380
• /
• 1996

Prevention of thromboembolism is the most important task in the development of bioconpatible small caliber artificial vascular graft. In normal vessels, vascular endothelial cells maintain homeosatsis by secreting numerous factors. The aim of this study is to develope a method which Improves biocompatibility of small caliver polyurethane graft using endothelial cell culture technique, and ev luate the efTectiveness of extracelluar matrix for endothelization which was produced by cultured fibroblast. Methods ; Multiporous polyurethane tube of 3 mm diameter, 0.3 mm thickness was manufactured for vascular graft. Three mongrel dogs were intubated and internal jugular veins removed. Extracelluar matrix produced by cultured flbrobast which was obtained from dog's internal jugular vein were coated to the polyurethane graft. Then, endothelial cells extracted from Jugular vein were cultured and fixed on the extracelluar matrix layer of vascular graft. Endothelial cell coated vascular grafts were implanted to the carotid arteries of experimental dogs as interposed autograft. Implanted grafts were removed after 3 and 6 weeks. As a control, PTFE graft was interposed on carotid artery. These experiments demonstrated that extracelluar matrix produced by fibroblast can afford a base for endothelial cell linings of polyurethane graft. Although thrombosis were developed on autografted en othelial cell coated graft, 33% opening was noticed, and showed less adhesion to adjacent tissue layer. These findings suggest that fiboblast produced extracelluar matrix which can be used for edothelial cell lining vascular graft, and by improving the cultured endothelial cell function, there will be a new modality for reducing thrombosis on small vascular graft.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.1
• /
• pp.63-77
• /
• 2004

The purpose of this study was to construct an issue-centered discussion instructional model for Home Economics and to determine its effect on middle school students' critical thinking. The research questions were posed as below. 1) The object and content of home economics in the 7th national middle school curricula are analyzed to sort out possible issues. 2) An issue-centered discussion instructional model is constructed to be applicable to middle school home economics class. and a lesson plan is prepared. 3) The effect of the issue-centered discussion instructional model developed in this study on student critical thinking faculty is examined. The findings of this study were as follows : First. seven criteria were selected to determine what types of issues were applicable to home economics lesson. Based on the selected criteria. 41 themes of issues were extracted from the 7th middle school textbooks. and their content validity was verified. Second, an issue-centered discussion instructional model was designed to deal with four themes in eight sessions in the procedure of problem raising, confirming, term defining. tentative alternative selecting, data gathering. discussing/critical approaching. and selecting/concluding. Third, two different third-year classes of K middle school in the city of Busan that consisted of 75 students were respectively selected as an experimental group and a control group, and the experiment was conducted in eight sessions for five weeks to see whether the teaching plan brought any changes to the critical mind of the students. The experimental group exposed to the issue-centered discussion lesson made a significant progress in critical thinking faculty(P＜.05). In particular. that instruction gave a favorable impact on demonstration evaluating(P＜.05). one of the critical thinking subfactors. When the students were asked to assess the issue-centered discussion lesson. most of them viewed it favorably. In the future, more research efforts should be dedicated to enhancing the practical applicability of issue-centered discussion instruction in home economics education. developing good evaluation tools about critical thinking faculty and finding out how discussion instruction could be conducted more efficiently.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.504-511
• /
• 2001

Preventive resin restoration, extended concept of occlusal pit and fissure sealing, is procedure composed of as follows. Cavity preparation is limited to areas of initial caries The cavity is then restored with composite resin, while other sound pits and fissures are sealed with pit and fissure sealant. If pit and assure sealant with which microrestoration is possible is used, it may be of great benefit to both patient and operator in case of difficult-to-control children s treatment. However study on preventive resin restoration using this kind of materials have been scarce. The purpose of this study was to compare the microleakage of four different modes of preventive resin restoration. Restoration using only composite resin was compared together Fifty-five bicuspids were prepared with small class I cavity preparation on the occlusal surface, divided into the following groups and restored accordingly. Group 1 : Cavity was restored with Z-100 composite resin Group 2 : Cavity was restored with Z-100 composite resin. Pits and fissures were then sealed with Teethmate F-1 Group 3 : Cavity was restored with Z-100 composite resin Pits and fissures were then sealed with Ultraseal XT-plus Group 4 : Cavity and pits and fissures were restored with Ultraseal XT-plus altogrether Group 5 : Cavity was restored with Ultraseal XT-plus. Pits and fissures were then sealed with the same material. After restoration, the samples were thermocycled 500 times between $5^{\circ}C$ and $55^{\circ}C$ with a dwell time of 30 seconds. After thermocycling, the samples were dipped into 1% methylene blue solution for 24 hours, then rinsed with tap water. The teeth were then embedded in resin and cut buccolingually along the tooth axis and observed with a stereomicroscope to determine the degree of microleakage. The results were as follows : 1. Group 4 showed the greatest microleakage, while group 3, showed the least. The mean microleakage decreased in the following order:4>1>5>2>3. 2. There was no stastically significant difference between group 1 and group 5(p>0.05). However, group 1 showed significantly greater microleakage compared to group 2 and 3(p<0.05) Group 1 showed significantly less microleakage compared to group 4(p<0.05). 3. Group 2 showed no statistically significant difference compared to group 3(p>0.05). However group 2 showed significantly less microleakage compared to group 4 and 5(p<0.05) 4. Group 3 showed significantly less microleakage compared to group 4 and 5(p<0.05). 5. Group 5 showed significantly less microleakage than group 4(p<0.05).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.1
• /
• pp.33-43
• /
• 2003

The midwater pair trawl which is being used at present in Korea have several problems. Firstly, it is difficult to control the net height on high towing speed. Secondly, net breaking often occurs owing to floats and thirdly, the volume of net on the net drum is so large. This study is aiming for examining the possibility of application for the Korean midwater pair trawl through the model experiment of non-float midwater pair trawl. The model of non-float midwater pair trawl was manufactured as 1/100 of the full scale net which is being used in bottom pair trawl for 850ps class considering the Tauti's Similarity law. The model experiment was carried out to analyze the opening efficiency according to the variation of lower warp length and the opening efficiency was investigated between th proto type and non-float type. The results obtained can be summarized as follows ; 1. The hydrodynamic resistance of non-float type was about 10~20% smaller than that of the proto type and it increased about 1ton according to the increase of dL at the condition of the same flow speed. The resistance acting on the lower warp decreased about 5% but that of the upper warp increased according to the increase of lower warp length (dL) at the condition of the same flow speed. 2. The net height of the non-float type decreased almost linearly according as the increased of flow speed and it increased in a logarithmic functional form with the increase of the lower warp length at the condition of the same flow speed. On the decreasing rate of the net height, the non-float type was lower than the proto type and the difference of the decreasing rate was about 12% at 3.0 knot, 25% at 4.0 knot, 25% at 4.0 knot respectively when dL was 30m. 3. The net width of non-float type was not varied so much as only 2m range and was larger than that of proto type. 4. The mouth area of non-float type decreased in a exponential functional form. On the decreasing rate of the mouth area, the non-float type was lower than the proto type. The filtering volume increased in a logarithmic functional form with increasing flow speed and the filtering volume of proto type decreased steeply over 3.0knot, but that of non-float type increased until 4.0knot. 5. The optimal length of lower warp was when the value of dL was about 30m and the optimal position of front weight was at the connection point of four net pendants.