• 한국세라믹학회지
• /
• 제43권5호
• /
• pp.309-314
• /
• 2006

We synthesized lithium zirconate using solid-state reaction and analyzed thermal properties (TG/DTA) of starting materials and the synthesized one. When $Li_2ZrO_3$ powder was exposed to $CO_2$ environment at $500^{\circ}C$, 93% of the theoretical absorption weight was gained within 280 min with fairly high sorption rate. Almost all the absorbed $CO_2$ was generated by heating the sample to $800^{\circ}C$. We also investigated densification behavior of $Li_2ZrO_3$ under $CO_2$ environment. By sintering $Li_2ZrO_3$ at $760^{\circ}C$ using 2-step process, we obtained dense product, composed mainly of $Li_2ZrO_3\;and\;ZrO_2$, with relative density of 92%.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.271-278
• /
• 2021

In this study, a chlorination technique for recycling Li₂ZrO₃, a reaction product of ZrO₂-assisted rinsing process, was investigated to minimize the generation of secondary radioactive pyroprocessing waste. It was found that the reaction temperature was a key parameter that determined the reaction rate and maximum conversion ratio. In the temperature range of 400-600℃, an increase in the reaction temperature resulted in a profound increase in the reaction rate. Hence, according to the experimental results, a reaction temperature of at least 450℃ was proposed to ensure a Li₂ZrO₃ conversion ratio that exceeded 80% within 8 h of the reaction time. The activation energy was found to be 102 ± 2 kJ·mol^-1·K^-1 between 450 and 500℃. The formation of LiCl and ZrO₂ as reaction products was confirmed by X-ray diffraction analysis. The experimental results obtained at various total flow rates revealed that the overall reaction rate depends on the Cl₂ mass transfer rate in the experimental condition. The results of this study prove that the chlorination technique provides a solution to minimize the amount of radioactive waste generated during the ZrO₂-assisted rinsing process.

• 한국재료학회지
• /
• 제6권7호
• /
• pp.709-715
• /
• 1996

${Ti}_{5}{Si}_{3}$와 ${Ti}_{5}{Si}_{3}-{ZrO}_{2}$ 복합재료의 연소합성에 미치는 전기장의 영향에 관하여 연구하였다. 45mole% 이상 첨가한 ${Ti}_{5}{Si}_{3}-{ZrO}_{2}$ 복합재료는 전기장하에서만 연소합성할 수 있었다. ${Ti}_{5}{Si}_{3}$-45mole% ${ZrO}_{2}$와 Ti5Si3-60mole% ${ZrO}_{2}$ 복합재료는 전기장을 가하지 않은 상태에서는 불안정한 연소파가 전파되었지만 반응은 완전히 일어나지 않았다 즉, 불안정한 연소파는 시편의 중앙 부근까지 전파 된 후 멈추었다. ${Ti}_{5}{Si}_{3}$-ZrO2 복합재료의 연소파 속도는 시편에 가해준 전기장에 의해 약간 증가하였다.

• 한국수소및신에너지학회논문집
• /
• 제28권2호
• /
• pp.129-136
• /
• 2017

Characteristics of $ZrO_2$ felt supported Cu/Zn catalysts have been investigated for the production of hydrogen via methanol steam reforming. Cu and Zn in different weight percent were loaded using wet impregnation over $ZrO_2$ felt support. The catalysts were characterized with BET and FE-SEM. The performance of these synthesized catalysts were investigated at SCR=1.5, $GHSV=2000h^{-1}$, temperature=$300{\sim}400^{\circ}C$, and pressure=2.5~19.5 barA. The results showed that the $Cu^{32.5}Zn^{7.5}ZrO_2$ catalyst was most active in terms of methanol conversion and hydrogen production. The methanol conversion in steam reforming of methanol was 84.6% at 19.5 barA and furnace $400^{\circ}C$ over $Cu^{32.5}Zn^{7.5}ZrO_2$ catalyst. The catalysts prepared using $ZrO_2$ felt show higher reactor temperature than the pellet type catalyst at same furnace temperature.

• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.17-23
• /
• 2009

알루미나가 코팅된 허니컴 구조의 금속모노리스에 담지된 $Ni/Ce_XZr_{(1-X)}O_2$ 촉매특성이 메탄의 자열개질 반응에 대해 연구되었다. Ce/Zr 비를 변화시킨 촉매 중 $Ni/Ce_{0.80}Zr_{0.20}O_2$ 촉매가 가장 높은 $CH_4$ 전환율을 나타내었다. $Ni/Ce_{0.80}Zr_{0.20}O_2$ 촉매의 Ni 함량에 따른 영향이 조사되었고, 15 wt%의 Ni을 담지하였을 때 가장 우수한 활성을 보여주었다. 또한 $H_2O/CH_4$ 비가 증가할수록 $H_2$ 수율은 증가하였다. $O_2/CH_4$ 비가 증가할수록 $CH_4$ 전환율은 향상되고, 반면에 $H_2$ 수율은 감소하였다. $GHSV=30,000h^{-1}$, S/C/O=2/1/0.5, 반응온도=$800^{\circ}C$에서 30시간 자열 개질반응을 테스트 한 결과, $Ni(15wt%)/Ce_{0.80}Zr_{0.20}O_2$ 촉매가 우수한 $CH_4$ 전환율(${\geq}99%$)과 안정성을 보여주었다.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.85-90
• /
• 2005

We report the phase transition temperatures of the $PbZrO_3$ perovskite nanotubes made by sol-gel template synthesis. The lead zirconate($PbZrO{_3}$) nanotubes were prepared with a chelate sol-gel of zirconium tetrabutoxide($Zr(OBu){_4}$) and leadacetate($Pb(OAc){_2}-3H_2O$). $Whatman^(r)$ anodisc membranes, with a 200nm pore size, served as the template. After removing the template in the 6M-NaOH solution, the $PbZrO{_3}$ nanotubes so far have shown an anomalous transition temperature, $123.6^{\circ}C$ as measured by DSC with a small particle size, 15.4nm determined by X-ray analysis with the aid of Scherrer's equation.

• 한국세라믹학회지
• /
• 제21권2호
• /
• pp.105-112
• /
• 1984

The Effect of Dditives $ZrO_2$ and $TiO_2$ on the enstatite body the composition of which was MgO.$SiO_2$ has been closely investigated on the physical properties and microstructure. $ZrO_2$ and $TiO_2$ as additives were added by weight 5, 10, 15, 20, 25% and 1, 2, 2.5, 5, 10, 20% respectively to the mixture (MgO : SiO2=1:1) and fired at the temperature ranging from 130$0^{\circ}C$ to 145$0^{\circ}C$ and 1275$^{\circ}C$ to 1375$^{\circ}C$. Increasing the add ition or $ZrO_2$ to 20% the physical property became better. In case of $TiO_2$ the sample containing 20% $TiO_2$ had a best effect on the enstastite body. The optimum firing range proved to 14$25^{\circ}C$ for $ZrO_2$ and 1325~135$0^{\circ}C$ for $TiO_2$. The effect of $ZrO_2$ and $TiO_2$ addition on the thermal expansion was observed not ot be remarkable.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.853-855
• /
• 1998

The electrical resistivity and mechanical properties of the hot-pressed and annealed ${\beta}$-SiC+39vol.%$ZrB_2$ electroconductive ceramic composites were investigated as a function of the liquid forming additives of $Al_{2}O_{3}+Y_{2}O_{3}$(6:4wt%). In this microstructures. no reactions were observed between $\beta$-SiC and $ZrB_2$, and the relative density is over 97.6% of the theoretical density. Phase analysis of composites by XRD revealed mostly of a $\alpha$-SiC(6H, 4H), $ZrB_2$ and weakly $\beta$-SiC(15R) phase. The fracture toughness decreased with increased $Al_{2}O_{3}+Y_{2}O_{3}$ contents and showed the highest for composite added with 4wt% $Al_{2}O_{3}+Y_{2}O_{3}$ additives. The electrical resistivity increased with increased $Al_{2}O_{3}+Y_{2}O_{3}$ contents because of the increasing tendency of pore formation according to amount of liquid forming additives $Al_{2}O_{3}+Y_{2}O_{3}$. The electrical resistivity of composites is all positive temperature coefficient resistance(PTCR) against temperature up to $700^{\circ}C$.

• 한국세라믹학회지
• /
• 제27권5호
• /
• pp.668-676
• /
• 1990

Glass in the ZrO2-SiO2 system containing up to 30mol% ZrO2 were prepared by heating the gel made from the mixed solutions of Zr(OC3H7)4 and partial hydrolysed Si(OC2H5)4. As a result, the monolith gel was made from the HCl and water content as 2.7$\times$10-3 and 8 molar ratio to alkoxide and drying temoperature as 4$0^{\circ}C$. Heating rate of dry gel maintained under 0.5$^{\circ}C$/min and heating at a temperature as 90$0^{\circ}C$ was found to be for making the transparent glass.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.477-483
• /
• 1987

Cr2O3 doped Pb(Zr0.525 Ti0.475)O3 piezoelectric ceramics were prepared from reagent grade oxide mixture, PbO, ZrO2, TiO2 and Cr2O3. Piezoelectric and aging properties of specimens were measured for various additions of Cr2O3. Generally, it has been known that aging rate decreased with Cr2O3 addition by stabilizing the domain wall. But hysteresis loops showed that the domain destabilization was occurred at high electric field (larger than 10KV/cm). In smaller additions of Cr2O3 (0-0.2mol%), aging rate increased and microcracks were created with increasing poling filed due to increasing internal stress. In larger additions of Cr2O3(0.4∼0.6mol%), aging rate decreased with increasing poling field.