• 대한교통학회지
• /
• 제29권2호
• /
• pp.111-121
• /
• 2011

기존 루프검지기를 이용한 반감응 신호제어는 한정된 검지영역으로 인해 대기 차량수에 따른 초기녹색시간의 산정이 불가능하며, 좌회전 베이 측면에서 진입하는 차량과 중차량 및 U턴 차량으로 인해 비합리적인 현시 조기종결문제가 발생할 수 있다. 따라서 본 연구에서는 감응현시의 초기녹색시간을 대기 차량수에 맞게 최적화하고, 검지영역 내 차량소거 여부를 파악함으로써 현시의 연장 및 조기종결을 결정하는 좌회전 감응식 신호제어전략을 개발하였다. 차량의 검지를 위해 영상검지기의 Video Image Tracking기술을 이용하였으며, 영상검지영역은 목적에 맞게 Zone in Zone방식의 3개 영역으로 구분하여 Zone1은 차량의 존재유무 파악, Zone2는 대기 차량수 파악, Zone3는 통과 차량수 파악의 기능을 수행하도록 설계하였다. CORSIM을 이용한 본 좌회전 감응제어의 현장 적용성 평가 결과, 정주기 제어, 반감응 제어(1), 반감응 제어(2)에 비해 Control delay가 각각 23.10%, 15.06%, 4.34% 감소하였으며, Queue time은 36.24%, 20.10%, 7.42%, Total time은 14.36%, 7.02%, 2.96% 감소하여 운영효율이 향상된 것으로 나타났다. 또한, 직진과 좌회전 v/c비에 따른 적용성 평가 결과, 직진교통량이 포화상태에 근접할수록, 좌회전 교통량이 적을수록 개선효과 큰 것으로 나타났다.

• 자원환경지질
• /
• 제7권2호
• /
• pp.45-62
• /
• 1974

Scheelite deposits in Sangdong mine are divided into three parallel vein groups, namely "Hanging-wall vein" which is located in the lowest parts of Pungchon Limestone, "Main vein" the most productive vein replaced a intercalated limestone bed in Myobong slate, "Foot-wall veins" a group of several thin veins parallel to main vein in Myobong slate. Besides the above, there are many productive quartz veins imbedded in the above veins and Myobong slate. Molybdenite and wolframite are barren in the former three veins group but associates only in quartz veins. Both main vein and foot-wall veins show regular zonal distribution, quartz rich zone in the center, hornblende rich zone surrounding the quartz rich zone and diopside rich zone in the further outside to the marginal parts of the vein. According to the distribution of three main minerals, quartz, hornblende and diopside the main vein can be divided into three zones which are in turn grouped into 7 subzones by distinct mineral paragenesis. They are summerized as follows: A. Diopside rich zone: 1. garnet-diopside.fl.uorite subzone 2. diopside-zoisite-quartz subzone 3. diopside-plagioclase subzone B. Hornblende rich zone: 4. hornblende-diopside-quartz subzone 5. hornblende-quartz-chlorite subzone 6. hornblende-plagioclase-quartz.sphene subzone C. Quartz rich zone: 7. quartz-mica-chlorite subzone The foot-wall veins can similarly be divided by mineral paragenesis into 3 zones, 6 subzones as follows: A. diopside rich zone: 1. garnet-diopside-quartz.fl.uorite subzone 2. garnet-diopside-wollastonite subzone B. Hornblende rich zone: 3. quartz-hornblende-chlorite subzone 4. hornblende-plagioclase-quartz subzone 5. hornblende-diopside-quartz subzone C. Quartz rich zone: 6. quartz-mica subzone The hanging-wall vein is generally grouped into 9 subzones by the mineral paragenesis which show random distribution. They are as follows: 1. diopside-garnet-fluorite subzone 2. diopside-zoisite-quartz subzone 3. diopside-hornblende-quartz-fluorite subzone 4. wollastonite-garnet-diopside subzone 5. hornblende-chlorite-quartz subzone 6. quartz-plagioclase-hornblende-sphene subzone 7. quartz-biotite subzone 8. quartz-calcite subzone 9. calcite-altered minerals subzone Among many composing minerals, garnet specially shows characteristic distribution and optical properties. Anisotropic and euhedral grossularite is generally distributed in the hanging wall vein and lower parts of the main vein, whereas isotropic and anhedral andradite in the upper parts of the main vein. Plagioclase (anorthite) and sphene are distributed ony near the foot-wall side of the aboveveins. wollastonite is a characteristic mineral in upper parts of the hang-wall vein. Molybdenite is distributed in the upper parts of quartz veins and wolframite in lower parts of quartz veins.

• 한국진공학회지
• /
• 제4권3호
• /
• pp.261-269
• /
• 1995

본 실험에서는 실리콘 웨이퍼 위에 photoresist(PR)와 octadecyltrichlorosilane(OST, CH3((CH2)17SiCI3)를 입혀서 UV/zone 처리를 어떻게 유기물질들이 UV/zone과 반응하여, 어떻게 표면에서 제거되는지를 in-line으로 연결된 XPS로 분석하고 반응시킨 표면들의 거칠기(roughness)를 AFM을 이용하여 관찰하였다. 실험결과 상온에서 UV/zone 처리를 했을 경우, PR과 OTS같은 유기물질이 표면에서 산화되는 것을 알 수 있었으나 이들이 제거되지 않고 표면에 그대로 남아있음을 알 수 있었다. 그러나 가열하면서(PR:$250^{\circ}C$, ORS:$100^{\circ}C$)UV/ozone 처리를 하였을 경우 표면에서 산화됨과 동시에 이들 산화물들이 표면에서 제거됨을 알 수 있었다. XPS 분석으로부터 이들의 산화반응물은 PR과 OTS 모두 -CH2-, -CH2O-, =C=O, -COO-를 가지는 것으로 나타났으며, 열에너지에 의해서 이들이 표면에서 제거되는 것으로 나타났다. AFM 분석결과는 상온에서 UV/ozone 처리를 하였을 경우에 표면의 거칠기가 적은 반면, 가열하면서 UV/o-zone처리를 하였을 경우에는 표면의 거칠기가 다소 증가하였다.

• Journal of Welding and Joining
• /
• 제25권4호
• /
• pp.1-3
• /
• 2007

• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.402-407
• /
• 2013

In this paper, the image processing for flexible disk grinding and the effect of the grinding conditions on the flat zone length of a workpiece are investigated, with the purpose of automating the grinding process. To accomplish this, three issues should be carefully studied. The first is finding the relationship between the flat zone length and the grinding conditions such as the cutting speed and feeding speed. The second is developing a neural network algorithm to predict the flat zone. The third is developing an image processing algorithm to measure the flat zone length of a workpiece. Slope analysis is used to determine straight and curved sections during the image processing. For verification, the estimated length and the length from the image processing are compared with the length measured by a projector. There is a minimum difference of 1.7% between the predicted and measured values. The results of this paper will be useful in compiling a database for process automation.

• 한국농공학회지
• /
• 제19권3호
• /
• pp.4483-4491
• /
• 1977

The results obtained are as follows; 1. The variation of the temperature in a vinyl house without heating system is similar to that of air temperature in a day. The difference of maximum temperature and minimum one in a day is 27$^{\circ}C$ which is two times greater than the daily difference of air temperature. 2. When the length of the duct is increased, the high temperature zone is built up in the direction of warm air discharge from the duct, and the low temperature zone is built up in the opposite direction of warm air discharge. But, in case of the duct length is short (0.05 L), the temperature distrubution in a vinyl house become uniform. It is concluded that the shorter length of the duct, the better the distribution of the temperature in a vinyl house is. 3. When the duct is installed at high position, the high temperature zone is built up in the upper zone of the vinyl house and the low temperature zone is built up in the lower zone. And when the position of the duct is low, the rate of temperature variation along the vertical direction become high, and the direct contact of warm air with the plant in the house is occured. It is concluded that the duct should be installed at the position of slightly higher than the plant height. 4. When the fuel consumption rate is fixed at the 101/hr, the lowest temperature warming rate in the vinyl house is 5$^{\circ}C$ without regard to the air temperature.

• 설비공학논문집
• /
• 제17권8호
• /
• pp.722-728
• /
• 2005

The present paper deals with heating energy estimation in Korean-style apartments, paying special attention to the effect of room condition settings. Two types of heating modes are considered: continuous single-zone and scheduled multi-zone. In the latter, zones during unoccupied periods remain unconditioned. Also analyzed are sensitivities in heating energy with respect to the air change rate and the set temperature. The energy use is estimated with TRNSYS 15, a dynamic load calculation program. Heating energy for the actual residential condition (1.0 ACH and $24^{\circ}C$) appears to be nearly the same as that for a typical design standard (1.5 ACH and $20^{\circ}C$). The air change rate affects heating energy as sensitive]y as the set temperature. For all the simulated cases, the scheduled multi-zone heating mode is more energy-efficient than the continuous single-zone. Heating energy depends appreciably on the shading factor. It is expected that considerable heating energy for apartment houses can be saved by employing a multi-zone mode along with appropriate control devices.

• 대한원격탐사학회지
• /
• 제2권2호
• /
• pp.79-94
• /
• 1986

TM data, which have better resolution in spatial and spectral than MSS data, were used for this study, and several Image Processing Techniques (IPT) were examined for finding the best IPT to fit to lineament extraction and mineralized zone mapping. The Ryeongnam area was selected as test area, because the area is one of major mineralized zones in Korea and its hydrothermal alteration zone is wider and deeper than other areas. The spatial filtering method is most optimum one for limeament extraction: that is, the directional spatial filtering is most efficient to detect N-S, E-W direction lineaments on the image, and the high boost filtering can be applied for mapping all direction lineaments. The ratio method was selected for detecting altered zone. It is possible to make several tens combinations in ratio with 7 bands of TM data, but considering spectral characteristics of each band of TM to the geological meterials and vegetation, the band 4/band 3(A), band 5/band 7(B), and B/A ratio methods were chosen among them. The 5/7 ratio image did not show clearly the altered area due to noise from vegetation cover, so the 4/3 ratio imae was used for trying to decrease the effect of vegetation. As a result the B/A ratio image showed quite nicely the altered zone of the test area. In conclusion, the spatial filtering is the best image processing techniques for lineament mapping, and the B/A ratio image in TM data is useful for the mineralized zone mapping.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.109-109
• /
• 2018

전 세계적인 기후변화로 인한 자연재해의 빈도가 급증하고 있으며, 대규모 재산피해가 빈번하게 발생하고 있다. 자연재해로 인한 피해를 효과적으로 저감시키기 위하여 지역적 특성과 재해 특징을 함께 고려한 적절한 대책 방안을 수립해야 한다. 본 연구에서는 지역적 특성(해안 지역, 산간 지역, 내륙 지역)에 따라 크게 3분류로 구분하였고, 지역별 호우피해 발생빈도를 함께 고려하여 피해 특석을 분석하고자 하였다. 호우피해 특징을 분석하기 위하여 지역별 피해액과 호우피해 발생빈도를 분석하였고, 지역별 피해액과 호우피해 발생빈도를 무차원화 하여 4가지 유형(Red Zone, Orange Zone, Yellow Zone, Green Zone)으로 분류하였다. 지역별로 평균 피해액 발생 빈도(I)와 최대 피해 발생빈도(II)로 피해유형을 구분하였다. 최종적으로 지역적 특징 3가지에 대하여 2가지 피해유형과 4가지 호우피해 발생빈도를 분석하였다. 본 연구를 통하여 대피해가 발생하는 Red Zone, Orange Zone의 경우 평균 피해액 발생빈도(I)는 30%이고, 최대 피해액 평균 발생빈도(II)는 23%로 분포하고 있음을 알 수 있다. 따라서 본 연구결과를 활용한다면, 지형에 따른 호우피해 특징 파악 및 효과적인 방재대책 수집에 활용 할 수 있을 것으로 판단된다.

• KIEAE Journal
• /
• 제14권2호
• /
• pp.87-98
• /
• 2014

This study is to identify quantitatively the function of carbon dioxide emissions reduction due to temperature and energy reduction according to direct carbon dioxide storage, shade provision, and evaportanspiration of urban park. According to the result of study, landscape tree indicated high carbon dioxide storage effect compare to bush, in which broadleaf tree indicated higher storage function than coniferous tree. It is believed to be the storage of carbon dioxide can be increased by increasing the composition rate of forest plants in the urban park. According to the direct estimation result of carbon dioxide storage in terms of example area, storage of carbon dioxide is estimated to be "seoul a zone" $476,818.8kg{\cdot}CO_2/m^2yr$, "anyang b zone" $186,435.7{\cdot}CO_2/m^2yr$, "daejeon c zone" $262,826{\cdot}CO_2/m^2yr$, "kwangju d zone" $231,657.8{\cdot}CO_2/m^2yr$. The carbon dioxide storage per unit area estimated to be "seoul a zone" $3.4{\cdot}CO_2/m^2yr$, "anyang b zone" $5.0{\cdot}CO_2/m^2yr$, "daejeon c zone" $2.6{\cdot}CO_2/m^2yr$, "kwangju d zone" $5.6{\cdot}CO_2/m^2yr$. The result of indirect carbon dioxide reduction effect estimated to be "seoul a zone" $291,603.4{\cdot}CO_2/m^2yr$, "anyang b zone" $165,462.4{\cdot}CO_2/m^2yr$, "daejeon c zone" $141,719.2{\cdot}CO_2/m^2yr$, "kwangju d zone" $154,803.4{\cdot}CO_2/m^2yr$. Carbon dioxide reduction potential amount through the urban park was increased to 1.6 times to 1.8 times when calculated to the indirect effect.