• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.29-36
• /
• 1991

The effects of heat treatment on fatigue crack growth behavior were studied in continuously reinfored, magnesium-based composite (FP/ZE41A). Following an earlier TEM investigation, specimens were thermally aged to modify the interfacial zone between the alumina fibers and mg alloy matrix. The fatigue crack growth experiments were conducted with specimens having the fiber orientation normal to the crack growth direction(longitudinal) and also specimens with the fibers oriented parallel to the crack growth direction(transverse). A comparision of the fatigue crack growth behavior indicates that aged longitudinal specimens are more resistant to fatigue crack growth than as-fabricated longitudinal specimens. Conversely, as-fabricated transverse specimens are more resistant to fatigue crack growth than aged transverse specimens. SEM observations of fiber pullout and ductile tearing on the fatigue fracture surfaces indicate that the aging weakens the strength of the fiber/matrix interface, giving rise to the observed fatigue crack growth behavior.

• Geotechnical Engineering
• /
• v.9 no.1
• /
• pp.7-20
• /
• 1993

The first Korean earthquake resistant design code was enacted in 1988. In the code, the soil factor which takes into account both the soil amplification factor and the soil -structare interaction effect is divided into three groups : soil factor, 5 : 1.0, 1.2 and 1.5. In order to assist in choosing the soil factors appropriately in the earthquake resistant design, the local site effects on the based shear force induced by earthquakes are considered in depth for typical soil conditions in Korea. The depth of the alluvial and/or weathered zone is usually not deep and the fresh rock is found at depth shallower than 20 meters, and even at about 10 meters around Seoul. One dimensional wave propagation theory and the elastic half space method are used to obtain the soil -structure interaction effect as well as the soil amplification effect. The kinematic interaction effect due to scattering of waves by pile foundation is also considered. Finally, the soil factor is recommended for each soil condition from loose state to dense, and also from shallow soil depth to deep, so that the designer can choose the factor with-out difficulty.

• Journal of Energy Engineering
• /
• v.14 no.2 s.42
• /
• pp.153-158
• /
• 2005

In order to investigate the short-term performance of polyethylene electrofusion joints, the mechanical tests and stress analysis have been conducted to the artificially defected weld joints. The defects of lack of fusion with a square-type were fabricated with 10, 20, 30, 40, 50, 60$\%$ size of the width of heat-ing wire zone, respectively. In this defect sires range, both tensile and bending test results showed the dependence of defect size to the electrofusion joints performance, but both sustained pressure and crush test results didn't. The numerical stress analysis results including the soil and internal pressures, tensile and bend-ing stresses clearly showed the dependence of fusion defect size. Based on both mechanical test and stress analysis results, the maximum acceptable defect size in polyethylene electrofusion joints is discussed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.3
• /
• pp.111-123
• /
• 2009

The purpose of this study is to investigate the time-elapse change of oil-polluted Taean coastal area with by Herbei Spirit oil spill incident. From Mandae of Iwonmeyon to Padori beach of Sowonmeyon, field monitering was conducted at eleven surveying points surveying. The specific conclusions from this study are as follows. The residual oil was not founded at ten surveying points, but the crude oil remained under the ground at the Groompo beach one year passed since the oil spill. Because the efforts of volunteers over millionaires and inhabitants for cleaning and reciprocating actions of waves, the oil-polluted coastal area by Herbei Spirit oil spill incident. It is guessed that a part of stranded oil spilled from the incident was degraded by physical, chemical, and biological weathering and the residue was dispersed in tidal and subtidal zone with oil-minerals aggregates(OMA).

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.99-107
• /
• 2012

We propose control mechanism of UAV(Unmanned Aerial Vehicle) group for making the communication network to the base station after the target is found. We assume UAVs can communicate to each other by wireless LAN without existing communication infrastructure. UAVs started to fly in linear formation, after finding target, UAVs move to the base station to send the information about the target. At least one UAV stays the position that the target is found. This paper explains the mechanism supporting reliable connectivity during UAV group's flying. We verify the proposed scheme and evaluate the performance through NS-2 simulation. The proposed scheme can be applied to the disaster area and war zone, which the existing communication infrastructure cannot be worked.

• Korean Journal of Optics and Photonics
• /
• v.23 no.3
• /
• pp.108-112
• /
• 2012

In this paper, two wavelengths mainly used for laser prostatectomy have been quantitatively compared: 532 and 980 nm. Two lasers at 40 W were employed to ablate bovine liver in vitro. Ablation performance was evaluated in light of number of sweeps, ablation volume, and coagulative necrosis. 532 nm yielded up to four times higher ablation efficiency than 980 nm. Regardless of wavelength, ablation rate per sweep decreased with the number of sweeps. 532 nm generated relatively deeper ablation craters along with thinner coagulation whereas 980 nm created superficial tissue ablation with up to 2 mm thick coagulative necrosis. Due to higher light absorption and effective thermal confinement, 532 nm induced more efficient tissue ablation with a smaller coagulative necrotic zone. The current study demonstrated that 532 nm could be a more ideal wavelength for laser prostatectomy, and the future in vivo investigations will confirm these findings.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.399-413
• /
• 2018

The purpose of this study is to find out the significance and functions of the voice-over narration in the storytelling of the web-drama OH Ku-sil. As a result, the first person narration has enhanced the intimacy with a viewer via subjective statements and produced the two time zone effect that the image and the voice-over stood on different tenses. On the other hand, the third person narration has expanded its functions beyond those of the cinema and TV drama. First, the third person narration in OH Ku-sil has performed the essential role presenting significant information for the viewer's understanding story. Second, the objective/authoritative statements of the third person narration have changed to the subjective/suggestive statements. Third, the third person narrator has expanded his/her role from a narrator to a virtual character by means of the comic statements. It seems to be the existing narration's effective response to the web-drama's medium characteristics seeking efficient storytelling under the tight time restriction. Delivering speedily the story information and amusement, this evolutionary voice-over narration is changing its status from the staying off subject to the condition of the new medium called web-drama.

• Economic and Environmental Geology
• /
• v.49 no.1
• /
• pp.23-30
• /
• 2016

Powder samples of natural lawsonite (Ca-lawsonite, $CaAl_2Si_2O_7(OH)_2{\cdot}H_2O$) was studied structurally up to 8 GPa at room temperature using monochromatic synchrotron X-ray powder diffraction and a diamond anvil cell (DAC) with a methanol : ethanol : water (16 : 3 : 1 by volume) mixture solution as a penetrating pressure transmitting medium (PTM). Upon pressure increase, lawsonite does not show any apparent pressure induced expansion (PIE) or phase transition. Pressure-volume data were fitted to a second-order Birch-Murnaghan equation of state using a fixed pressure derivative of 4 leading to a bulk modulus ($B_0$) of 146(6) GPa. This compression is further characterized to be isotropic with calculated linear compressibilities of ${\beta}^a=0.0022GPa^{-1}$, ${\beta}^b=0.0024GPa^{-1}$, and ${\beta}^c=0.0020GPa^{-1}$.

• Journal of Veterinary Clinics
• /
• v.32 no.6
• /
• pp.548-550
• /
• 2015

A 1-year-old female hedgehog was presented with subcutaneous mass in the right forelimb. Grossly, an elevated subcutaneous mass approximately 4 cm in diameter was located in forelimb. Central dark brown area was surrounded by peripheral milky white zone in the cut surface of mass. Histopathologically, numerous neoplastic cells formed irregular cords or sheets in dermis. Most of neoplastic cells showed palisading features to basement membrane with or without central caseous necrosis. These neoplastic cells showed invasive tendency to adjacent tissues. According to immunohistochemistry, the neoplastic cells demonstrated strong positive signals for pancytokeratin, and negative for vimentin. Based on the gross, histopathology and immunohistochemistry, this mass was diagnosed as basal cell carcinoma in a hedgehog.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.537-542
• /
• 2011

Fracture behaviors of polycarbonate (PC)/polyestrercarbonate (PEC) blends and their miscibility have been examined to find out the mechanism of ductilie-brittle transition of fracture behavior which would be a main governing factor on the thickness sensitivity of impact strength of PC. $T_g$ measurement showed that PEC with a carbonate content higher than 30 mol% was miscible with PC. In the notched Izod impact test of PC, ductile-brittle transition occurred in the range of 4 to 5 mm thickness. The impact strength of miscible PC/PEC5 blends ductile-fractured in the thin specimens decreased with increasing PEC5 content, which was in accordance with the decrease of elongation at break in tensile test. In the brittle fracture of the thick specimens, the impact strength was well correlated with the plastic zone size in the vicinity of the notch tip.