• 전기의세계
• /
• 제38권10호
• /
• pp.13-22
• /
• 1989

본 연구에서는 EL에 사용되고 있는 분말형광체에 대한 물리적 제현상을 소개하고 아울러 본 연구실에서 연구해 온 ZnS : Mn, Zns : TbF$_{3}$, Zns : SmF$_{3}$, CaS : EuCl$_{3}$, SrS: CeCl$_{3}$ 형광체 및 박막EL 소자에 관한 실험과 내용을 바탕으로 형광체의 특성을 종합 분석하고 현상을 고찰, 검토하고자 한다.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.237-245
• /
• 2023

In the cloud service, system resource such as CPU, memory, I/O bandwidth are shared among multiple users. Particularly, in Linux containers environment, I/O bandwidth is distributed in proportion to the weight of each container through the BFQ I/O scheduler. However, since the I/O scheduler can only be applied to conventional block storage devices, it cannot be applied to Zoned Namespace(ZNS) SSD, a new storage interface that has been recently studied. To overcome this limitation, in this paper, we implemented a weighted proportional I/O bandwidth sharing scheme for ZNS SSDs in dm-zoned, which emulates conventional block storage using ZNS SSDs. Each user receives a different amount of budget, which is required to process the user's I/O requests based on the user's weight. If the budget is exhausted I/O requests cannot be processed and requests are queued until the budget replenished. Each budget refill period, the budget is replenished based on the user's weight. In the experiment, as a result, we can confirm that the I/O bandwidth can be distributed on their weight as we expected.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.307-310
• /
• 1999

Using Se as a photoconductive element and ZnS as a luminescent element, a Se/ZnS thin film device for light amplifier applications was fabricated and its characteristics were investigated. The Se/ZnS thin film light amplifier was fabricated by evaporating the ZnS thin film on an ITO(Indium Tin Oxide) glass and the Se thin film on the ZnS thin film in sequence. The results of the characteristics investigation are summarized as follows: (1) When the frequency of an excitation voltage was increased, both the brightness response and the brightness saturation of the Se/ZnS thin film light amplifier began to start at a higher light input. (2) The gain of the Se/ZnS thin film light amplifier was dependent upon the amplitude and the frequency of the excitation voltage as well as an external light input. (3) When the Se/ZnS thin film light amplifier was excited by a direct current of a constant voltage, the frequency of the output brightness was\\`equal to the frequency of the input light applied. When the light amplifier was excited by a sinusoidal voltage of 60 Hz, the frequency of the output brightness was 120 Hz.

• 한국항해학회지
• /
• 제25권4호
• /
• pp.435-442
• /
• 2001

A new technique to grow a manganese-doped zinc-sulfide(ZnS：Mn) has been proposed using the repeated deposition of the Hot Wall method. The optical characteristics and crystallinity for the ZnS and ZnS：Mn thin films deposited on a quartz glass substrate by the method were investigated. Also, The ZnS：Mn thin film elcetroluminescent devices were fabricated by the method to study luminescence characteristics. All films showed (111)-oriented cubic structure. By the repeated deposition, the deposition rates were decreased, and the optical characteristics and crystalline properties were improved, which clarifies that the method is effective to deposit the thin films with good crystallinity Futhermore, the crystallinity was more improved by the doping of Mn. Only one peak emission at around 585nm originating from Mn luminescent center is observed In the photoluminescent and electroluminescent spectra of ZnS：Mn films and the luminance of the ZnS：Mn-based thin film electroluminescent devices was obtained below 60cd/$m^2$ . The optical and crystalline properties, luminescence characteristics are discussed in terms of the effects of the repeated deposition and Mn-doping.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.108-111
• /
• 2000

The Zns thin films were deposited on non-alkali glass substrate by the Hot Wall method. The thin films grown at various evaporation cell and substrate temperature were characterized by spectrophotometer and X-ray diffraction to investigate the optical and structural characteristics. The deposition rates were increased with increasing the cell temperature, and were decreased with increasing substrate. The optical characteristics of thin films depends on the deposition rates. The band gap energies measured at room temperature with 3.4~3.5eV are smaller than the theoretical value of 3.54eV. All ZnS thin films are oriented in (111) of the principal direction of a zincblende structure.

• 한국전기전자재료학회논문지
• /
• 제13권10호
• /
• pp.876-882
• /
• 2000

ZnS phosphors were sintered at vacuum atmosphere, Sintered under the temperature of 950$\^{C}$, ZnS phosphors were grown into the sphalerite structure and two emission peaks were observed at the positions of 460nm and 528nm of the emission spectra. Sintered over the temperature of 1050$\^{C}$, there were simultaneously the sphalerite and wurtize structure in the ZnS phosphors and three emission peaks were observed at the positions of 440nm and 515nm of emission spectra. The emission peaks of 460nm obsrved under the sphalerite structure and 440nm observed under the wurtize structure were due to the vacancy of Zn formed in the ZnS phosphors. The emission peaks of 528nm observed under the sphalerite structure and 515nm observed under the wurtize structure wre caused by the radiative transitions from the level of the vacancy of S formed in the ZnS phosphors to the valance band.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.71-74
• /
• 2003

Photoconductor for direct detection fiat-panel imager present a great materials challenge, since their requirement include high X-ray absorption, ionization and charge collection, low leakage current and large area deposition, CdTe is practical material. We report studies of detector sensitivity, That is an CdTe with $5{\mu}m$ thickness on glass. That is hybrid layer of depositting ZnS:AgCl phosphor with $100{\mu}m$ on CdTe. The leakage current of hybrid is similar to it of a-Se, but photocurrent is larger than a-Se. Both of them have high spatial resolution, but hybrid has higher sensitivity than a-Se at comparable bias voltage.

• Journal of Species Research
• /
• 제2권1호
• /
• pp.85-90
• /
• 2013

Based on 440 skulls recently collected from two areas of the wild ass population in Mongolia, the time course of tooth eruption and replacement was investigated. The dentition pattern allows identification of age up to five years. We also conclude that annual lines in the tooth cementum can be used to determine the age in years for wild asses older than five years after longitudinal tooth sections were made with a low-speed precision saw. The first upper incisor proved to be most suitable for age determination, although the starting time of cement deposition is different between the labial and lingual sides of the tooth. The accurate age of the wild ass can be determined from the number of annual lines and the time before the first formation of the cementum at the respective side of the tooth.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.127-131
• /
• 2005

We report a nanometer scale mark formation using a $PtO_x$ thin film or a TbFeCo rare-earth transition metal film and the mechanism. The multi-layer samples($ZnS-SiO_2/PtOx/ZNS-SiO_2,\;ZnS-SiO_2/TbFeCo/ZnS-SiO_2$) were prepared with a magnetron sputtering method on a polycarbonate or a glass substrate. By laser irradiation of approximately a few nanoseconds, nanometer scale marks were fabricated. During the fabrication process, the thin films were thermally reacted or inter-diffused during the laser irradiation. 75 nm bubble marks in the PtOx multi-layer sample by an approximately 4-ns laser irradiation. Inside the bubble mark, Pt particles with a few nanometer sizes are distributed. The $50{\sim}100$ nm bubble marks in the TbFeCo multi-layer sample by a few nanosecond laser irradiations. We will report the detail structure of the samples, the bubble mark formation process and the mechanism.

• 전자공학회논문지D
• /
• 제35D권6호
• /
• pp.21-27
• /
• 1998

E-beam 장비로 ZnS:Mn/Zns:Tb 2층 구조의 TFEL 소자를 제작하여 전기, 광학적 특성을 조사하였다. ITO 투명전극과 ATO 절연체가 증착된 유리기판(corning 7059 glass) 위에 E-beam 장비를 이용하여 ZnS:Mn, ZnS:Tb 형광체를 각각 3000 A로 증착하여 총 두께 6000 Å 갖도록 제작하였다. ZnS:Mn/ZnS:Tb TFEL 소자의 스펙트럼은 Mn/sup 2+/ 이온과 Tb/sup 3+/ 이온의 고유한 발광 스펙트럼을 모두 포함하여 540㎚에서 640㎚에 이르는 매우 넓은 범위의 발광 스펙트럼을 나타내었다. 휘도는 인가전압의 크기가 112V에서부터 급격히 증가하여 155 V에서 포화 휘도 1025 Cd/㎡를 나타내었고 최대 전압 185 V에서의 휘도는 2080 Cd/㎡이었다. Capacitance-voltage(C-V) 및 transferred charge-phosphor voltage(Q/sub t/-V/sub p/) 특성으로부터 형광층 capacitance (C/sub p/)와 절연층 capacitance (C/sub i/)가 각각 13.5 nF/㎠, 60 nF/㎠됨을 알 수 있었고, 인가전압의 최대치를 155 V에서 185 V로 증가시킬수록 TFEL 소자의 문턱전압(V/sub thl/)이 126 V에서 93 V로 감소함을 알 수 있었다. 이것은 인가전압을 증가시킬수록 polarization charge가 증가되고 polarization charge에 의해 형성된 형광체 내부전압이 증가되었기에 문턱전압이 감소한 것이다. 또한 처음으로 문턱전압에 관한 수식을 제안하였으며 문턱전압의 이론치와 실험치가 일치하는 것을 확인하였다.