• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.122-122
• /
• 2010

ZnO is a widely investigated material for the blue and ultraviolet solid-state emitters and detectors. It has been promoted due to a wide-band gap semiconductor which has large exciton binding energy of 60 meV, chemical stability and low radiation damage. However, there are many problems to be solved for the growth of p-type ZnO for practical device applications. Many researchers have made an efforts to achieve p-type conductivity using group-V element of N, P, As, and Sb. In this letter, we have studied the optical characteristics of the antimony-doped ZnO (ZnO:Sb) thin films by means of photoluminescence (PL), PL excitation, temperature-dependent PL, and time-resolved PL techniques. We observed donor-to-acceptor-pair transition at about 3.24 eV with its phonon replicas with a periodic spacing of about 72 meV in the PL spectra of antimony-doped ZnO (ZnO:Sb) thin films at 12 K. We also investigate thermal activation energy and carrier recombination lifetime for the samples. Our result reflects that the antimony doping can generate shallow acceptor states, leading to a good p-type conductivity in ZnO.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.12
• /
• pp.942-948
• /
• 2010

In this study we aims to examine the effects of 0.5 mol% $Cr_2O_3$ addition on the reaction, microstructure development, resultant electrical properties, and especially the bulk trap and interface state levels of ZnO-$Bi_2O_3-Sb_2O_3$ (Sb/Bi=0.5, 1.0, and 2.0) systems (ZBS). The samples were prepared by conventional ceramic process, and characterized by XRD, density, SEM, I-V, impedance and modulus spectroscopy (IS & MS) measurement. The sintering and electrical properties of Cr-doped ZBS (ZBSCr) systems were controlled by Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$) was decomposed more than $100^{\circ}C$ lowered on heating in ZBS (Sb/Bi=1.0) by Cr doping. The densification of ZBSCr (Sb/Bi=0.5) system was retarded to $800^{\circ}C$ by unknown Bi-rich phase produced at $700^{\circ}C$. Pyrochlore on cooling was reproduced in all systems. And $Zn_7Sb_2O_{12}$ spinel ($\alpha$-polymorph) and $\delta-Bi_2O_3$ phase were formed by Cr doping. In ZBSCr, the varistor characteristics were not improved drastically (non-linear coefficient $\alpha$ = 7~12) and independent on microstructure according to Sb/Bi ratio. Doping of $Cr_2O_3$ to ZBS seemed to form $Zn_i^{..}$(0.16 eV) and $V^{\bullet}_o$ (0.33 eV) as dominant defects. From IS & MS, especially the grain boundaries of Sb/Bi=0.5 systems were divided into two types, i.e. sensitive to oxygen and thus electrically active one (1.1 eV) and electrically inactive intergranular one (0.95 eV) with temperature.

• Journal of the Korean Chemical Society
• /
• v.12 no.4
• /
• pp.139-141
• /
• 1968

The extraction curve of metal ions with Amberite LAl-chloroform has been found to be more steeper than with Amberite LAl-xylene or hexane, and the extraction ratio of Zn (II) in 2M HCl solution is 98%. The extraction ratio of As (III) in 9~11M HCl soln., Sb (III) in 2~4M HCl soln., and Fe (III) in 6~10M HCl soln. are 100%. The separated elements from Bi metal were determined by colorimetry, Zn (III) with dithizone, As (III) with Gutzeit method, Sb (III) with brilliant green and Fe (III) with thiocyanate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.8
• /
• pp.738-748
• /
• 2008

In this study, it has been investigated on the changing behavior of electrical properties in $ZnO-Bi_2O_3-Sb_2O_3$ (Sb/Bi=2.0, 1.0 and 0.5) ceramics. The samples were prepared by conventional ceramic process, and then characterized by I-V, C-V curve plots, impedance and modulus spectroscopy (IS & MS) measurement. The electrical properties of ZBS systems were strongly dependent on Sb/Bi. In ZBS systems, the varistor characteristics were deteriorated noticeably with increasing Sb/Bi and the donor density and interface state density were increased with increasing Sb/Bi. On the other hand, we observed that the grain boundary reacted actively with the ambient oxygen according to Sb/Bi ratio. Especially the grain boundaries of Sb/Bi=0.5 systems were divided into two types, i.e. sensitive to oxygen and thus electrically active one and electrically inactive intergranular one with temperature. Besides, the increased pyrochlore and $\beta$-spinel phase with Sb/Bi ratio caused the distributional inhomogeneity in the grain boundary barrier height and the temperature instability. To the contrary, the grain boundary layer was relatively homogeneous and more stable to temperature change and kept the system highly nonlinear at high Bi-rich phase contents.

• Journal of the Korean Ceramic Society
• /
• v.32 no.12
• /
• pp.1323-1330
• /
• 1995

The effects of various additives on the microstructures of sintered ZnO varistors were examined. Bi2O3, Sb2O3 and Cr2O3 were added to ZnO step by step to identify the effect of each component. The specimens were prepared by sintering at 110$0^{\circ}C$ and 120$0^{\circ}C$ in ambient atmosphere. In ZnO-Bi2O3-Sb2O3 ternary system, decrease of averge grain size due to antimony oxide addition depends on sintering temperature as well as Bi2O3 content. When Sb2O3 was partly or completely replaced by Cr2O3, grain size was further reduced. A significant amount of pyrochlore phase which was not transformed to spinel and Bi2O3-rich liquid phase seemed to remain during sintering at 110$0^{\circ}C$. Unlike ZnO-Bi2O3-Sb2O3 system, the $\alpha$-spinel phase containing significant amount of Cr did not transform to pyrochlore during furnace cooling. Fine spinel particles around 1${\mu}{\textrm}{m}$ size were ovserved within ZnO grains and grain boundaries, which were believed to be responsible for grain-growth inhibition in ZnO-Bi2O3-Sb2O3.

• Journal of Korea Foundry Society
• /
• v.32 no.2
• /
• pp.91-97
• /
• 2012

The effects of Bi and Sb additions on the microstructures and casting properties in lead-free Cu-Zn-Sn broze were investigated. (1) When only Bi was added to the bronze, Bi was precipitated on the ${\delta}$ phase of ${\alpha}$ dendrite cell boundary. When Bi and Sb were added together, Bi was precipitated on the ${\delta}_A$ which was the Sb-rich area in the ${\delta}$ phase. (2) The addition of Sb accelerated the formation of ${\delta}$ phase, and when Sb, Bi and Pb were added, Bi and Pb were precipitated as mixed solution in the ${\delta}_A$ phase. (3) The combined addition of Sb and Bi resulted in the suppression of shrinkage due to the complementary effects of the mass feeding of ${\alpha}$-dendrite cluster covered with ${\delta}$ phase and sealing of micro-shrinkage in the ${\delta}$ phase by solidification expansion of Bi.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.682-688
• /
• 2012

In this study we aimed to examine the co-doping effects of 1/6 mol% $Co_3O_4$ and 1/4 mol% $Cr_2O_3$ (Co:Cr = 1:1) on the reaction, microstructure, and electrical properties, such as the bulk defects and the grain boundary properties, of ZnO-$Bi_2O_3-Sb_2O_3$ (ZBS; Sb/Bi = 0.5, 1.0, and 2.0) varistors. The sintering and electrical properties of Co,Cr-doped ZBS, ZBS(CoCr) varistors were controlled using the Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$), ${\alpha}$-spinel ($Zn_7Sb_2O_{12}$), and ${\delta}-Bi_2O_3$ were formed in all systems. Pyrochlore was decomposed and promoted densification at lower temperature on heating in Sb/Bi = 1.0 by Cr rather than Co. A more homogeneous microstructure was obtained in all systems affected by ${\alpha}$-spinel. In ZBS(CoCr), the varistor characteristics were improved (non-linear coefficient, ${\alpha}$ = 20~63), and seemed to form ${Zn_i}^{{\cdot}{\cdot}}$(0.20 eV) and ${V_o}^{\cdot}$(0.33 eV) as dominant defects. From impedance and modulus spectroscopy, the grain boundaries were found to be composed of an electrically single barrier (0.94~1.1 eV) that is, however, somewhat sensitive to ambient oxygen with temperature. The phase development, densification, and microstructure were controlled by Cr rather than by Co but the electrical and grain boundary properties were controlled by Co rather than by Cr.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.133.2-133.2
• /
• 2007

• Journal of the Korean Ceramic Society
• /
• v.37 no.7
• /
• pp.651-651
• /
• 2000

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.1057-1060
• /
• 2001

By comparison of the experimental results in two systems of ZnO varistors, its appear that Sb$_2$O$_3$is the indispensable element for twinning in ZnO varistors, and the Zn$_{7}$Sb$_2$O$_{12}$ spinel acts as the nucleus to form twins. A1$_2$O$_3$is not the origin of twinning in ZnO varistor, but it was found that A1$_2$O$_3$could strengthen the twinning and form a deformation twinning by ZnA$_{12}$O$_4$-dragging and pinning effect. The inhibition ratios of grain growth and nonuniformity of two systems ZnO varistors increase with the increase of A1$_2$O$_3$content. The twins affect the inhibition of grain growth, the mechanism could be explained follow as : twins increase the mobility viscosity of ZnO grain and grain boundary, and drag ZnO grain and liquid grain boundary during the sintering, then the grain growth is inhibited, and the microstructure becomes more uniform.orm.m.