• Advances in materials Research
• /
• 제11권3호
• /
• pp.225-235
• /
• 2022

It includes the synthesis of pristine ZnO nanoparticles and a series of Ag-doped zinc oxide nanoparticles was carried out by reflux method by varying the amount of silver (1, 3, 5, 7 and 9% by mol.). The morphology of these nanoparticles was investigated by SEM, XRD and FT-IR techniques. These techniques show that synthesized particles are homogenous spherical nanoparticles having an average particle size of about 50-100 nm along with some agglomeration. The photocatalytic activity of the ZnO nanoparticles and Ag doped ZnO nanoparticles were investigated via photodegradation of methylene blue (MB) as a standard dye. The data from the photocatalytic activity of these nanoparticles show that 7% Ag-doped ZnO nanoparticles exhibit much enhanced photocatalytic activity as compared to pristine ZnO nanoparticles and other percentages of Ag-doped ZnO nanoparticles. Furthermore, 7% Ag-doped ZnO was made composites with sulfur-doped graphitic carbon nitride by physical mixing method and a series of nanocomposites were made (3.5, 7.5, 25, 50, 75% by weight). It was observed that the 25% composites exhibited better photocatalytic performance than pristine S-g-C 3 N 4 and pure 7% Ag-doped ZnO. Tauc's plot also supports the photodegradation results.

• 청정기술
• /
• 제22권2호
• /
• pp.89-95
• /
• 2016

화장품이나 타이어에 주로 사용되는 ZnO 나노입자에 대한 나노위해성 문제가 대두되고 있다. 이에 본 연구에서는 수계상에 존재하는 ZnO 나노입자에 대한 제거 및 생물학적 독성평가를 실시하였다. 송사리(O. Latipes) 수정란을 이용한 단기 노출평가에서는 5 mg L⁻¹에서는 일부 개체에서 기형이 관찰되었고, 10 mg L⁻¹에서 성장지연에 의한 부화율저감이 관찰되었다. 이러한 결과를 바탕으로 ZnO 나노입자가 수생생물종에게 독성을 보인다는 것을 확인하고, 이를 제거하기 위한 방법인 침전법을 제안하였다. Na₂S와 Na₂HPO₄를 이용하여 ZnO를 ZnS와 Zn₃(PO₄)₂로 전환시켜 침전시켰으며, 이들의 침전에 의한 제거율은 거의 100%에 이르렀다. 또한 해당 침전물 대한 물벼룩(D. magna) 급성독성 평가에서 어떠한 독성 영향도 찾지 못하였다. 이는 ZnO의 황 및 인처리를 통한 변환이 독성 감소에 효과적이었음을 나타낸다.

• 센서학회지
• /
• 제29권1호
• /
• pp.63-67
• /
• 2020

This study investigated the influence of various sintering pressures of ZnS nanoparticles prepared by hydrothermal synthesis performed at 220 ℃ for 20 h. The hydrothermally synthesized ZnS nanoparticles formed a cubic phase. The ZnS nanoparticles were sintered using a hot-press process at 850 ℃ for 2 h under pressures of 10, 20, 30, 40, 50, 60, and 70 MPa. The ZnS ceramics indicate the cubic phase is the major phase and the hexagonal phase is the minor phase. In the ZnS ceramics, as the sintering pressure increased, a decrement in the hexagonal phase was confirmed. When the sintering pressure equaled or exceeded 30 MPa, the transmittance and density improved with reductions in porosity and hexagonal phase. A sintering pressure of 60 MPa delivered the highest transmittance (69.7%).

• 한국전기전자재료학회논문지
• /
• 제30권6호
• /
• pp.349-355
• /
• 2017

Zinc sulphide (ZnS) nanoparticles were fabricated by hydrothermal synthesis at $180^{\circ}C$ for 12 h. Two kinds of ZnS powder (hydrothermal synthesized ZnS and commercial ZnS) were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) for phase and microstructure, respectively. The XRD patterns showed that all ZnS nanoparticles have a sphalerite (cubic) structure. The nanoparticles of two different ZnS powders were sintered by spark plasma sintering. The sintered ZnS were analyzed by XRD, SEM, and FT-IR. We found that the transmittance of the infrared region is highly dependent on the density and crystal structure of sintered ZnS and the purity of the starting ZnS powder.

• 한국분말재료학회지
• /
• 제27권3호
• /
• pp.233-240
• /
• 2020

Nano-sized ZnSe particles are successfully synthesized in an aqueous solution at room temperature using sodium borohydride (NaBH₄) and thioglycolic acid (TGA) as the reducing agent and stabilizer, respectively. The effects of the mass ratio of the reducing agent to Se, stabilizer concentration, and stirring time on the synthesis of the ZnSe nanoparticles are evaluated. The light absorption/emission properties of the synthesized nanoparticles are characterized using ultraviolet-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, and particle size analyzer (PSA) techniques. At least one mass ratio (NaBH4/Se) of the reducing agent should be added to produce ZnSe nanoparticles finer than 10 nm and to absorb UV-vis light shorter than the ZnSe bulk absorption wavelength of 460 nm. As the ratio of the reducing agent increases, the absorption wavelengths in the UV-vis curves are blue-shifted. Stirring in the atmosphere acts as a deterrent to the reduction reaction and formation of nanoparticles, but if not stirred in the atmosphere, the result is on par with synthesis in a nitrogen atmosphere. The stabilizer, TGA, has an impact on the Zn precursor synthesis. The fabricated nanoparticles exhibit excellent photo-absorption/discharge characteristics, suggesting that ZnSe nanoparticles can be alloyed without the need for organic solutions or high-temperature environments.

• Rapid Communication in Photoscience
• /
• 제4권2호
• /
• pp.45-47
• /
• 2015

We have successfully synthesized $AgInS_2$ core and $AgInS_2$/ZnS core/shell nanoparticles by the sonochemical method. The ultrasonic based $AgInS_2$ and $AgInS_2$/ZnS nanoparticle synthesis can be utilized as a simple and rapid method. The $AgInS_2$/ZnS nanoparticles show the higher fluorescence intensity and quantum yield than $AgInS_2$ nanoparticles. Fluorescence wavelength of $AgInS_2$/ZnS shows blue shift from 635 nm to 610 nm against $AgInS_2$ because of reducing the defect sites and increasing spatial confinements. For the fluorescence lifetime, $AgInS_2$/ZnS (124.8 ns) has longer lifetime than $AgInS_2$ (54.8 ns).

• 전기화학회지
• /
• 제14권1호
• /
• pp.1-8
• /
• 2011

이온성 액체는 일정한 온도 범위에서 액체로 존재하는 이온성 염으로, 유기 양이온과 유기 또는 무기 음이온의 이온결합으로 이루어져 있다. 본 연구에서는 이온성 액체를 CdSe/ZnS 반도체 나노입자 합성의 리간드 및 용매로 사용하여 이들이 나노입자의 형태와 결정 구조에 미치는 영향에 대해서 연구하였다. CdSe/ZnS 나노입자는 용매로 알킬기의 길이가 다른 imidazolium 계열; 1-R-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([RMIM][TFSI]), R = ethyl ([EMIM]), butyl ([BMIM]), hexyl ([HMIM]), octyl ([OMIM]), 을 사용하여, 평균 크기는 약 8~9 nm 이고 두 상 zinc-blende 및 wurtzite 혼합물로 합성하는 것을 성공하였다. 또한, CdSe/ZnS 나노입자는 trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide ([$P_{6,6,6,14}$][TFSI]) 이온성 액체와 octadecene (ODE)의 혼합 용액을 사용하여 합성하였다. [$P_{6,6,6,14}$][TFSI]의 부피비가 증가함에 따라 나노입자의 결정 구조가 zinc-blende 구조에서 wurtzite 구조로 조절되었다. 또한 나노입자의 평균 크기는 약 5.5 nm 로써 [RMIM][TFSI] 를 사용했을 때 보다 더 작게 합성되었다. 이처럼 이온성 액체에 의해서 나노입자의 크기뿐 만 아니라 결정 구조도 조절할 수 있음을 처음으로 증명하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.24-27
• /
• 2004

ZnS nanoparticles were synthesized and doped with $Pr^{3+}\;and\;Mn^{2+}$. Photoluminescence(PL) peaks were observed at 430 nm for pure ZnS, 585 nm for $Mn^{2+}-doped$ ZnS, and at around 430, 460, 480, 495 nm for ZnS nanoparticles doped with $Pr^{3+}$, respectively. For co-doped sample, both characteristics of doping with each element were exhibited. Optical annealing through UV irradiation was carried out in the two atmospheres; air and vacuum. The increases of the luminescence intensity was more considerable in the air, which is attributed to the photo-induced oxidation. In the case of co-doped sample the change of the emission color was observed by UV annealing.

• Journal of Ceramic Processing Research
• /
• 제20권4호
• /
• pp.411-417
• /
• 2019

Graphene doped zinc oxide nanoparticles (G-ZnO) were prepared using modified hummer's technique together with the ultrasonic method and characterized by field emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), fourier-transform infrared spectroscopy (FTIR) and high-resolution transmission electron microscopy (HRTEM). Different samples of epoxy resin nanocomposites reinforced with G-ZnO nanoparticles were prepared and were marked as F1 (without adding nanoparticles), F2 (1% w/w G-ZnO), and F3 (2% w/w G-ZnO) in combination of ≈ 56:18:18:8w/w% with epoxy resin/hardener, ammonium polyphosphate, boric acid, and Chitosan. The peak heat release rate (PHRR) of the epoxy nanocomposites was observed to decrease dramatically with the increasing G-ZnO nanoparticles. However, the LOI values increased significantly with the increase in wt % of G-ZnO nanoparticles. From the UL-94V data, it was confirmed that the F2 and F3 samples passed the flame test and were rated as V-0. The results obtained in the present work clearly revealed that the synthesized samples can be used as efficient materials in fire-retardant coating technology.

• Advances in nano research
• /
• 제5권2호
• /
• pp.127-140
• /
• 2017

Metal nanoparticles have been intensively studied within the past decade. Nano-sized materials have been an important subject in basic and applied sciences. Zinc oxide nanoparticles have received considerable attention due to their unique antibacterial, antifungal, and UV filtering properties, high catalytic and photochemical activity. In this study, microbiological aspects of scale formation in PVC pipelines bacteria and fungi were isolated. In the emerging issue of increased multi-resistant properties in water borne pathogens, zinc oxide (ZnO) nanoparticle are being used increasingly as antimicrobial agents. Thus, the minimum bactericidal concentration (MBC) and minimum fungal concentration of ZnO nanoparticles towards pathogens microbe were examined in this study. The results obtained suggested that ZnO nanoparticles exhibit a good anti fungal activity than bactericidal effect towards all pathogens tested in in-vitro disc diffusion method (170 ppm, 100 ppm and 30 ppm). ZnO nanoparticles can be a potential antimicrobial agent due to its low cost of production and high effectiveness in antimicrobial properties, which may find wide applications in various industries to address safety issues. Stable ZnO nanoparticles were prepared and their shape and size distribution characterized by Dynamic light scattering (35.7 nm) and transmission electron microscopic TEM study for morphology identification (20 nm), UV-visible spectroscopy (230 nm), X-ray diffraction (FWHM of more intense peak corresponding to 101 planes located at $36.33^{\circ}$ using Scherrer's formula), FT-IR (Amines, Alcohols, Carbonyl and Nitrate ions), Zeta potential (-28.8). The antimicrobial activity of ZnO nanoparticles was investigated against Bacteria and Fungi present in drinking water PVC pipelines biofilm. In these tests, Muller Hinton agar plates were used and ZnO nanoparticles of various concentrations were supplemented in solid medium.