• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.6
• /
• pp.475-486
• /
• 1997

The characteristics of atmospheric aerosols were investigated as a function of particle size and water solubility. The atmospheric aerosols were sampled with classifying into 12 size ranges by the use of Andersen low-pressure impactor. Collected aerosol particles were extracted by ultrapure water and filtered to be separated into water-soluble and insoluble components. The concentrations 12 elements in both components were determined by PIXE analysis. And the concentrations of 8 ions in the soluble component were analyzed by ion chromatography. In general, the mass size distribution of particulate matter was represented as a bimodal distribution. The mass size distributions of S$(SO_4^{2-}), K(K^+), Zn and NH_4^+$ skewed to the smaller size range and those of Si, Ca$(Ca^{2+}), Fe, Na^+ and Mg^{2+}$ skewed to the larger size range. They had roughly one peak in the fine and coarse particle region,respectively. On the other hand, the mass size distribution of Ti, Mn, Ni, Cu, $Cl^- and NO_3^-$ were represented as the bimodal distribution. Fe and Si in the aerosol particles extracted into pure water are existing in high insoluble state. Conversely, almost the whole of S is dissolved in water.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.5
• /
• pp.345-353
• /
• 1997

The purpose of the study was to stastically classify individual PM-10 measured by SEM/EDX (scanning electron microscopy/energy dispersive x-ray analyzer). The SEM/EDX provided various physical parameters like optical diameter, as well as major 18 chemical information (Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Pb) for a particle-by-particle basis. The total of 1,419 particles were analyzed for the study. Thus density and mass of each particle can be estimated based on its chemical composition. Further the study developed 4 semisource profiles including highway, oil boiler, incinerator, and soil emissions, where each sample was collected near the source in the ambient air The profiles developed were consisted of mass fractions and their uncertainties based on a particle class concept. To obtain mass fraction of each particle class, an agglomerative hierarchical cluster analysis was initially applied to create particle classes for each sample. Then uncertainties were calculated for each class based on the jacknife method. The 1,258 particles out of 1,419 (88.7%) were assorted in newly generated particle classes. The study provides opportunities to identify particle's source quantitatively and to develope various receptor models.

• Journal of Microbiology
• /
• v.41 no.4
• /
• pp.289-294
• /
• 2003

Gelatinase is a proteolytic enzyme that hydrolyzes gelatin. Gelatinolytic activity was detected from culture broths of Streptomyces griseus IFO13350 and HH1 by paper disc assays on 0.5% agar plates containing 1% gelatin. The concentrated extracellular protein from the S. griseus was analyzed by SDS polyacrylamide gel, and two proteins, with molecular weights of 30 and 28 kDa, respectively, were identified to have gelatinase activity by gelatin zymography. The protein with a molecular weight of 28 kDa was confirmed to be S. griseus trypsin (SGT). The effects of metal ions and metal chelators on the protease activity of the SGT were studied. Of the metal ions tested, only manganese was found to enhance the protease activity, 2.6 times, however, $Co^{2+},\;Cu^{2+},\;and\;Zn^{2+}$, and metal chelators, such as EDTA and EGTA, inhibited the SGT activity. When the protease activity of the SGT was measured at various pHs, in the presence of 5 mM $MnCl_2$, its highest activity was at pH 11.0, whereas only 60% of the maximum activity was observed between pHs 4.0 and pH 6.0, and almost 80% activity between pHs 7.0 to pH 10.0. The protease activity was measured at various temperatures in the presence of 5 mM $MnCl_2$. The SGT was found to be stable up to $60^{\circ}C$ for 30 min, while only 16% of the enzyme activity remained at $60^{\circ}C$, and at $80^{\circ}C$ almost all the activity was lost. The optimal temperature for the protease activity was $50^{\circ}C$.

• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.665-676
• /
• 2003

To investigate the chemical characteristics of PM$\_$2.5/ in Seoul, Korea, atmospheric particulate matters were collected using a PM$\_$10/ dichotomous sampler including PM$\_$10/ and PM$\_$2.5/ inlet during the period of October 2000 to September 2001. The Inductively Coupled Plasma-Mass Spectromety (ICP-MS), ion Chromatography (IC) methods were used to determine the concentration of both metal and ionic species. A statistical analysis was performed for the heavy metals data set using a principal component analysis (PCA) to derived important factors inherent in the interactions among the variables. The mean concentrations of ambient PM$\_$2.5/ and PM/sub10/ were 24.47 and 45.27 $\mu\textrm{g}$/㎥, respectively. PM$\_$2.5/ masses also showed temporal variations both yearly and seasonally. The ratios of PM$\_$2.5/PM$\_$10/ was 0.54, which similar to the value of 0.60 in North America. Soil-related chemical components (such as Al, Ca, Fe, Si, and Mn) were abundant in PM$\_$10/, while anthropogenic components (such as As, Cd, Cr, V, Zn and Pb) were abundant in PM2s. Total water soluble ions constituted 30∼50 % of PM$\_$2.5/ mass, and sulfate, nitrate and ammonium were main components in water soluble ions. Reactive farms of NH$_4$$\^$+/were considered as NH$_4$NO$_3$ and (NH$_4$)$_2$SO$_4$ during the sampling periods. In the results of PCA for PM$\_$2.5/, we identified three principal components. Major contribution to PM$\_$2.5/ seemed to be soil, oil combustion, unidentified source. Further study, the detailed interpretation of these data will need efforts in order to identify emission sources.

• Corrosion Science and Technology
• /
• v.16 no.6
• /
• pp.273-277
• /
• 2017

Atmospheric corrosion is clearly the most noticeable of all corrosion processes. A tremendous amount of economic losses are caused by atmospheric corrosion. Thus, it is imperative to know the level of atmosphere's aggressiveness or in other words "corrosivity", before designing or planning any corrosion prevention strategy. In Singapore, corrosivity values were not recorded earlier though the process of measurement and recording was prevalent in other countries. With an aim of filling this gap, three test sites were setup at three locations in Singapore to represent marine, industrial and urban atmospheres or their mixtures. Subsequently, corrosivity readings were measured and recorded according to ISO 9223:2012 for the first time in Singapore. Salient atmospheric constituents or parameters like time of wetness (TOW), $Cl^-$, $SO_2$, $NO_2$, $O_3$, and $HNO_3$ were measured at all sites over a period of time to categorize corrosivity of particular atmosphere. The effect of the atmosphere on corrosion of steel, Cu, Al, and Zn has also been investigated and quantified. "Estimated" and "determined" corrosivities were quantified and compared according to ISO 9223 standard. The study data along with final corrosivity measurements will be presented and discussed in the present work.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.79-84
• /
• 2004

The existing technological schemes for processing rhenium-containing raw materials involve the recovery of Re from solutions, which can be effectively achieved by anion exchange method. The application of anion exchange also allows to study rhenium state in aqueous solutions and to develop analytical control methods. The present work is focused on investigation of ion exchange equilibrium in the analytical system Re(VII)-HCl-$SnCl_2$-KSCN-anion exchanger by means of sorption-desorption method as well as by electron, IR- and diffuse reflection spectroscopy. It was shown that rhenium can be quantitatively recovered from this system. It is proposed to use the sorption-spectroscopic method for Re(VII) determination in aqueous solutions. The calibration curve is linear in the concentration range of 0.5-20.0 mg/L (sample volume is 25.0 mL) and the detection limit is 0.05 mg/L. The presence of Mo(VI), Cu(II), Fe(II, III), Ni(II), Zn(II) as well as $K^+,\;Na^+$ do not hinder the solid-phase determination of rhenium. Rhenium (VII) determination by diffuse reflection spectroscopy was carried out in model solutions as well as in samples of river-derived water and in solutions obtained after the dissolution of spent catalysts.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1337-1343
• /
• 2007

The aim of this study was to isolate chicken feather-degrading bacteria with high keratinolytic activity and to investigate cultural conditions affecting keratinolytic enzyme production by a selected isolate. A chicken feather-degrading bacterial strain CH3 was isolated from poultry wastes. Isolate CH3 degraded whole chicken feather completely within 3 days. On the basis of phenotypical and 16S rDNA studies, isolate CH3 was identified as Bacillus thuringiensis CH3. This strain is the first B. thuringiensis described as a feather degrader. The bacterium grew with an optimum at pH 8.0 and $37^{\circ}C$, where maximum keratinolytic activity was also observed. The composition of optimal medium for keratinolytic enzyme production was feather 0.1%, sucrose 0.7%, casein 0.3%, $K_2HPO_4$ 0.03%, $KH_2PO_4$ 0.04%, $MgCl_2$ 0.01% and NaCl 0.05%, respectively. The keratinolytic enzyme had a pH and temperature optima 9.0 and $45^{\circ}C$, respectively. The keratinolytic activity was inhibited ethylenediaminetetraacetic acid, phenylmethylsulfonyl fluoride, and metal ions like $Hg^{2+},\;Cu^{2+}\;and\;Zn^{2+}$. The enzyme activated by $Fe^{2+}$, dithiothreitol and 2-mercaptoethanol.

• Korean Journal of Pharmacognosy
• /
• v.17 no.1
• /
• pp.23-34
• /
• 1986

To find antitumor components of Lyophyllum decastes, the mycelia of L. decastes were cultured in artificial media and a new antitumor component which showed potent antitumor activity against sarcoma 180 implanted in mice, was isolated and named 'Lyophyllan A'. Lyophyllan A was composed of a polysaccharide moiety (86%) and a protein moiety (2%). The polysaccharide moiety was found to be a heteroglycan which consisted of glucose (48.1%), mannose (30.8%), galactose, xylose and fucose. The protein moiety contained 18 amino acids. Cultural characteristics of L. decastes were investigated by shake culture method. The best result was obtained when L. decastes was cultured in medium glucose 50g, peptone 10g, corn steep liquor 30ml, $KH_2PO_4$ 0.87g, $MgSO_4$ $7H_2O$ 0.5g, $CaCl_2$ 0.3g, $FeSO_4{\cdot}7H_2O$ 10mg, $MnCl_2{\cdot}4H_2O$ 7mg, $ZnSO_4{\cdot}7H_2O$ 4mg and $CuSO_4{\cdot}5H_2O$ 1mg per one liter at $26^{circ}C$, 180rpm, for 9 days.

• Journal of Applied Biological Chemistry
• /
• v.60 no.3
• /
• pp.257-263
• /
• 2017

A cellulolytic strain Y2 was isolated from soil obtained in the Canadian Alpine region. The isolate was identified as Paenibacillus sp. Y2 by 16S rRNA sequencing. When grown in LB medium supplemented with carboxymethyl-cellulose (CMC), CMCase production increased to 122.0% of that observed in LB without CMC. Culture supernatant was concentrated by ultrafiltration and 80% ammonium sulfate precipitates were separated by Hi-Trap Q and CHT-II chromatography. The purified enzyme (EG-PY2) showed a homogeneous single band and the molecular mass was estimated to be 38 kDa by SDS-PAGE. Optimum pH and temperature of the enzyme were 4.5 and $30^{\circ}C$, respectively. The half-life of enzyme activity at 50 was 140.7 min, but the enzyme was drastically inactivated within 5 min at $55^{\circ}C$. The enzyme was highly activated to 135.7 and 126.7% by 5.0 mM of $Cu^{2+}$ or $Mg^{2+}$ ions, respectively, and moderately activated by $Ba^{2+}$ and $Ca^{2+}$ ions, whereas it was inhibited to 76.8% by $Fe^{2+}$, and to ${\leq}50%$ by $Mn^{2+}$, $Co^{2+}$, $Zn^{2+}$, and EDTA. The enzyme was activated to 211.5% in the presence of 0.5 M of NaCl and greatly tolerant to 3.15M of NaCl. The enzyme showed 2.98 times higher ${\beta}$-glucanase activity than CMCase activity. Based on these results, it can be concluded that EG-PY2 is an acidophilic, cold-active, and halotolerant endoglucanase. The authors suggest it is considered to be useful for various industrial applications, such as, fruit juice clarification, acidic deinking processes, high-salt food processing, textile and pulp industries, and for biofuel production from seaweeds.

• Journal of the Korean Chemical Society
• /
• v.38 no.2
• /
• pp.146-150
• /
• 1994

The simultaneous determination of Zn, Cd, Pb and Cu in 1.000%(w/v) tungsten matrix by differential pulse anodic stripping voltammetry at a hanging mercury drop electrode has been studied. Tartaric acid(pH=5.00) was used as a supporting electrolyte. Optimum analytical conditions were found that the deposition potential was -1.2 volt(vs. Ag/AgCl), the deposition time was 3 minutes. The linear concentration range of all trace metal ions in 1.000%(w/v) tungsten matrix were 10 to 50 ppb. And the detection limit(3${\sigma}$) of zinc, cadmium, lead and copper were 1.25, 1.02, 1.69, and 1.02 ppb respectively. This method was superior to the ICP-AES method which detection limits(3${\sigma}$) in 1.000%(w/v) tungsten matrix were 8.0, 5.0, 120 and 5 ppb respectively.