• Title/Summary/Keyword: ZnS:Cu,Al

Search Result 191, Processing Time 0.035 seconds

Corrosion properties of the 6/4 forged brass for the coupler transferring LPG between tank lorry and LPG station (LPG 충전소와 탱크로리의 가스 이$\cdot$충전 접속장치 커플러용 6/4 단조 황동의 부식특성에 관한 연구)

  • Kil Seong-Hee;Kwon Jeung-Rock;Kim Ji-Yuon;Doh Jung Man
    • Journal of the Korean Institute of Gas
    • /
    • v.5 no.2 s.14
    • /
    • pp.14-21
    • /
    • 2001
  • In order to investigate the damage mechanism of the coupler transferring LPG, microstructural observation and chemical analysis of the couplers operated for the long time in the LPG stations and virgin 6/4 forged-brass corrosion-tested were conducted. Their microstructure was consisted of two phases that bright $\beta$ precipitates were irregularly dispersed in $\alpha$ matrix. The chemical compositions of oxide layer on the surface of the used coupler were composed of S, C, O, Al, Si, etc. as well as Cu and Zn. In environmental corrosion tests of both $10\%$ HCl and Mattsson solutions, no apparent deviations in mechanical impact strength of forged-brass was observed. While, in U-bend stress corrosion cracking specimen, some microcracks were observed.

  • PDF

Comparison of Halloysitum Rubrum before and after Physical and Chemical Manipulation (적석지(赤石脂)의 포제전후의 성분 비교연구)

  • Kook, Yoon-Bum
    • The Korea Journal of Herbology
    • /
    • v.20 no.2
    • /
    • pp.17-26
    • /
    • 2005
  • Objectives : The study has been undertaken to scrutinize the results of Halloysitum Rubrum before and after physical and chemical manipulation. Methods : I used X-rays diffracted analysis system(Phillips X'Pert - MPD System) on condition of 40Kv, Anode of Cu Ka to grasp the compositions of crude Halloysitum Rubrums which have been from here and there after pulverization them below 200 mesh. X-rays fluorescence analysis system have been used to check the chief elements content of the ore on condition of 40Kv, 95mA. ICP-MS analysis system(Perkin Elmer, Elan 6100)have been used after a micro-elements and a heavy metals take advantage of mixed acid were dissolved completely. Results : The compositions of the ore Halloysitum Rubrum are composed of large amount of Halloysite and Kaolinite, and small amount of Hematite, Alum, quartzite. The chief elements content of the ore Halloysitum Rubrum are composed of Al and Si. A heavy metals in Halloysitum Rubrum are As, Cd, Cr, Cu, Pb, Zn, etc. As and Zn's amounts was lessen after physical and chemical manipulation Halloysitum Rubrum are decreased at $400^{\circ}C\;and\;450-500^{\circ}C$ each by heat analysis system. Conclusion : Results of this study show that Halloysitum Rubrum can be used in a diverse ways to treat many kinds of disease.

  • PDF

Die Bestimmung von Spurenelementen in Naurlichen Wassern durch Rontgenfluoreszenzspektrometrie nach Konzentration durch Verdampfen (Ⅰ) (X-線螢光分析에 依한 天然水中의 微量金屬定量 [I] 蒸發濃縮에 依하여)

  • Yung Kyu Park
    • Journal of the Korean Chemical Society
    • /
    • v.13 no.1
    • /
    • pp.41-44
    • /
    • 1969
  • Eine neuentwickelte Methode zur Herstellung von Me${\ss}$praparaten wird fur die Bestmmung der Spurenelemente in Wasser Rontgenfluroreszspektrometrie angewendet. Supuren von Kupfer, Blei, Zink, Nickel, Kobalt und Eisen werden aus großen Mengen von naturlichem Wasser durch Verdampfen konzentriert. Aus der konzentrierten Losung werden die Spurenelemente durch Einleitung von Schwefelwasserstoff bei pH 8 unter Zusatz von Aluminiumsulfat-Trager ausgefallt. Die Niederschlage der Metallsulfide werden durch Membranfilter filtriert, mit Gelatine fixiert und ihre Absolutmengen durch Rontgenfloreszenzanalyze bestimmt. Kupfer, Blei, Zink, Nickel, Kobalt und Eisen werden bei einer Konzentration von 2.5 bis 50.0 p.p.b. mit einer relativen Standardabweichung 14.0% gemesser.

  • PDF

A Study on the Chemical characteristics of Anion Components and Metallic Elements of PM10 in Miryang and Changwon (밀양·창원지역의 PM10 중 음이온 성분 및 금속성분의 화학적 특성에 관한 연구)

  • Suh Jeong-Min;Jeon Bo-Kyung;Choi Kum-Chan
    • Journal of Environmental Science International
    • /
    • v.13 no.12
    • /
    • pp.1049-1058
    • /
    • 2004
  • PM10 concentration of total 48 samples collected from 4 sites (the root of Miryang University, Sangnam township Office in Miryang. the root of Changwon elementary school, and Junam reservoir in Changwon) turned out to range from 42.29 to 69.49{\mu}g/m^{3}$, and the average concentration was the root of Changwon elementary school $(69.49{\mu}g/m^{3})$>the root of Miryang university $(58.59{\mu}g/m^{3})$>Junam reservoir $(43.56{\mu}g/m^{3})$>Sangnam township Office $(42.29{\mu}g/m^{3}).> In particular, Junam reservoir, the Clean Area, had a slightly higher value than Sangnam township Office. It was thought although the site was plane and windy without pollutants around. it had a higher concentration value influenced by external factors including bigger population and a northeasterly wind due to a newly-established industrial complex nearby. As for water-soluble ions among PM10 particle collected in Miryang and Changwon area, SO42- accounted for $50{/%}$ and NO3-, was $35{\%}$, and the concentration order was S042->N03->Cl->F-. As for the average concentration of metallic components among PM10 particle collected in Miryang and Changwon area. the root of Changwon elementary school had the AI concentration, Fe concentration and Zn concentration 4 times, 3 times and 1.5 times that of Junam reservoir, respectively. The root of Miryang University had the AI concentration 2 times that of Sangnam township Office, and had Fe concentration and Zn concentration $1.2\~1.5$ times those of Sangnam township Office. When it comes to the relation between metallic elements and meteorological factors in Changwon area, the highest coefficient of correlation was between temperature and humidity with 0.92, and temperature and wind speed turned out in the reverse correlation. The coefficient of correlation between Al and Cr was as high as 0.78. Among metallic elements, the coefficient of correlation between Cu and Pb, Cd, Al were 0.84, 0.85, 0.79, respectively. It is thought that the high coefficient of correlation between Cu and Pb is ascribed to busy traffic and wind in the urban areas, Sammun-dong and Gagok-dong in Miryang. Meanwhile, the coefficients of correlation between Fe and Cu, Al, Zn, Cd, Pb were in the reverse correlation. These coefficients of correlation are attributed to the difference in pollutant sources, rather than difference in pollutant and non-pollutant.

The Characterization of Spherical Perticles in Steam Generator Sludge (증기발생기 슬러지 중 구형입자의 특성 조사)

  • Pyo, Hyung-Yeal;Park, Yang-Soon;Park, Sun-Dal;Park, Kyoung-Kyun;Song, Byung-Chul;Park, Yong-Joon;Jee, Kwang-Yong
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.4 no.1
    • /
    • pp.59-64
    • /
    • 2006
  • Ion exchange resin particles should not be found in steam generator(S/G) sludge. The suspicious spherical resin particles observed in S/G sludge sample were characterized for particle size distribution under optical microscope using the micro-technique, for element analysis by the electron probe micro analysis (EPMA), and for molecular identification by the IR spectroscopy. The particle sizes are distributed from 1 to $200{\mu}m$ for the sludge, while 40 to $500{\mu}m$ for the spherical resin particles. The results of the elemental analysis showed different major impurities: Si, Al, Mn, Cr, Ni, Zn and Ti for the sludge particles, while Si, Cu, Zn for the spherical resin particles. However, both particles contain Fe as a matrix of magnetite $(Fe_3O_4)$. IR spectrum of the spherical particles was not quite similar to the IR spectrum of ion exchange resins used in S/G system. These results indicate that the spherical particles are not related to ion exchange resin particles and may be formed by the process of the sludge formation.

  • PDF

Spectrophotometric Determination of Trace Lead(II) After Extraction of Lead-Thiosulfate Complex into Aliquat336-CHCl$_3$ and Replacement by Cu (납-티오황산 착물생성과 구리치환에 의한 미량 납(II)의 비색분석에 관한 연구)

  • Lee, Seok-Ki;Joung, Chang-Ung
    • Journal of Environmental Health Sciences
    • /
    • v.24 no.3
    • /
    • pp.1-5
    • /
    • 1998
  • A spectrophotometric method was developed for the acidic solution stripped after an extraction of 0.5 to 2.5 ppm of Lead(II) from 50 mL of $Na_2S_2O_3$ solution into chloroform as the ion-pairs formed between their thiosulfate complexes and alkylamine, Aliquat336. Pb(II) in the stripped solution forms an complex with DDTC in pH 7.3 buffer solution, and was developed in yellow by copper replacement. The ydlow-colored solution have the maximum absorbance at 435 nm in the measurement of absorbance by UV-Visible spectrophotometer. The interference ions such as Fe(III), Hg (II), Al(III), Co, Cu, Ni, Zn, Ca, Sn, have great effects on the extraction, but they were overcomed by the usage of adequate masking agents before an extraction. At last, a good result was obtained in applying this method to synthetic water.

  • PDF

Effects of Na on CIGS thin film solar cell (Na이 CIGS 박막 태양전지에 미치는 영향에 관한 연구)

  • Kim, Chaewoong;Kim, Daesung;Kim, Taesung;Kim, Jinhyok
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2010.06a
    • /
    • pp.62.1-62.1
    • /
    • 2010
  • CIS(CuInSe2)계 화합물 태양전지는 높은 광흡수계수와 열적 안정성 및 조성 조절을 통한 밴드갭 조절이 용이해 고효율 박막 태양전지로 각광 받고 있다. 또한 CIGS 태양전지는 기존의 유리기판 대신 유연한 기판을 사용해 flexible 태양전지 제조가 가능하다. 이러한 유연기판은 보통 stainless steel과 같은 금속 기판이 많이 사용되는데 기존의 soda-lime glass 기판과는 달리 금속기판에는 Na이 첨가되어 있지 않아 별도의 Na첨가를 필요로 한다. Na은 CIGS 흡수층의 조성조절을 용이하게 하여 태양전지의 변환 효율을 향상시키는 역할을 한다. 본 연구에서 기판은 Na이 첨가되어있지 않은 corning glass를 사용 하였으며 NaF를 이용해 Mo가 증착된 기판에 NaF의 두께를 달리하며 증착해 CIGS 흡수층의 grain 사이즈를 비교 하였으며 그 후 태양전지 소자를 제조해 광전특성을 분석하였다. 후면 전극으로 약60nm 두께의 Mo를 DC Sputtering 방법을 이용해 증착 하였다. buffer층으로는 약 50nm의 CdS층을 CBD방법을 이용하여 제조 하였으며 TCO 층으로 약 50nm의 i-ZnO와 약 450nm의 Al-ZnO를 RF Sputtering방법으로 증착 하였다. 마지막으로 앞면 전극으로 약 $1{\mu}m$의 Al을 Thermal Evaporation방법으로 증착하였다. 태양전지 소자의 면적은 $0.49cm^2$로 효율을 비교 분석하였다.

  • PDF

The Recycling of Inorganic Industrial Waste in Cement Industry (시멘트산업에서 무기질 산업 폐·부산물의 재활용)

  • Kang, S.K.;Nam, K.U.;Seo, H.N.;Kim, N.J.;Min, K.S.;Chung, H.S.;Oh, H.K.
    • Clean Technology
    • /
    • v.6 no.1
    • /
    • pp.61-69
    • /
    • 2000
  • In this study, generation process and properties of inorganic industrial waste which can be used in cement industry were investigated. The scheme of recycling to use the selected waste as raw materials, mineralizer and flux, admixture and raw materials for special cement was decided and then various experiments were carried out. The experimental results were as follows ; In the use of industrial waste as raw materials, ferrous materials could be substituted by Cu-slag, Zn-slag, electric arc furnace or convertor furnace slag etc., and a siliceous material could be substituted by sand from cast-iron industry. By-products from sugar or fertilizer industry, which has $CaF_2$ as the main component, and jarosite from Zn refinery enabled clinker phases to be formed at lower temperature by $100{\sim}150^{\circ}C$. Adding Cu slag and STS sludge in proper proportion to cement improved properties of cement. Fly ash and limestone powder as admixture had the same effect on cement. As a raw material for special cement, aluminium waste sludge could be used in making ultra early strength cement, which had the compressive strength of $300kg/cm^2$ within 2hours. And two different ashes from municipal incinerator could be raw materials of the cement which was mainly composed of $C_3S$ and $C_{11}A_7{\cdot}CaCl_2$ as clinker phases.

  • PDF

Desmutagenicity of the Enzymatic Browning Reaction Products Which Obtained from Prunus salicina (yellow) Enzyme and Polyphenol Compounds (재래종 황색자두효소 갈변반응 생성물의 돌연변이 억제작용)

  • Ham, Seung-Shi
    • Applied Biological Chemistry
    • /
    • v.30 no.1
    • /
    • pp.71-76
    • /
    • 1987
  • The mutagenicity and desmutagenicity on enzymatic browning reaction products which obtained from prunes salicina (yellow) enzyme and polyphenol compounds were carried out. In the rec-assay on Bacillus subtilis strains H17 and M45, the enzymatic browning reaction products of pyrogallol, hydroxyhydroquinone, 3,4-dihydroxytoluene and catechol of $10^{-2}M$ did not showed mutagenicity. In the effects of various metal ions on the rec-assay, the enzymatic browning reaction products of pyrogallol showed mutagenic activity by $Fe^{3+},\;Mn^{2+},\;Zn^{2+},\;Ni^{2+}$ and $Al^{3+}$. In the enzymatic browning reaction products of hydroxyhydroquinone, $Cu^{2+},\;Mn^{2+}$ and $Pb^{2+}$ were effected in mutagenic action and the enzymatic browning reaction products of catechol was effected in mutagenic action by $Mn^{2+}$. In the DNA-breaking action of enzymatic browning reaction products of pyrogallol, hydroxyhydroquinone, 3,4-dihyroxytoluene and catechol did not show, DNA-breaking action. In the effects of various metal ions on the DNA-breaking action of enzymatic browning reaction products, $Cu^{2+}$ showed DNA-breaking action. In the mutagenicity test on Sal. typhimurium strains TA98 and TA 100 with S-9 mix, 4 kinds of browned substances did sot shove muragenicity, all the browned substances showed strong desmutagenic activity in the presence of benzo $({\alpha})-pyrene$ with S-9 mix.

  • PDF

Characterization of an Alkaline Protease from an Alkalophilic Bacillus pseudofirmus HS-54 (호알칼리성 Bacillus pseudofirmus HS-54가 생산하는 알칼리성 Protease의 특성)

  • Bang, Seong-Ho;Jeong, In-Sil
    • Korean Journal of Microbiology
    • /
    • v.47 no.3
    • /
    • pp.194-199
    • /
    • 2011
  • An alkalophilic bacterium producing alkaline protease was isolated from waste water and solar saltern sample and identified as Bacillus pseudofirmus HS-54 based on morphological, biochemical characteristics as well as 16S-rRNA gene sequencing. The HS-54 protease was purified to homogeneity using ammonium sulfate precipitation, DEAE cellulose column chromatography, and sephadex G-100 gel filtration with a 4.0 purification fold. The molecular mass of the purified enzyme was estimated by SDS-PAGE to be 27 kDa. The optimal pH and temperature for the purified protease activity were 10.0 and $50^{\circ}C$, respectively. The purified enzyme was relatively stable at the pH range of 6.0-11.0 and at the temperature below $50^{\circ}C$. This enzyme was activated by $Ca^{2+}$ and $Mg^{2+}$ and inhibited by $Hg^{2+}$, $Cu^{2+}$, $Zn^{2+}$, $Al^{3+}$, $Ag^{2+}$. And this enzyme was strongly inhibited by PMSF, suggesting that it belongs to the serine protease superfamily.