• 한국재료학회지
• /
• 제16권7호
• /
• pp.445-448
• /
• 2006

Highly c-axis oriented ZnO thin films were grown on Si(100)substrates with Zn buffer layers. Effects of the Zn buffer layer thickness on the structural and optical qualities of ZnO thin films were investigated using X-ray diffraction (XRD), photoluminescence (PL) and Atomic force microscopy (AFM) analysis techniques. It was confirmed that the quality of a ZnO thin film deposited by rf magnetron sputtering was substantially improved by using a Zn buffer layer. The highest ZnO film quality was obtained with a Zn buffer layer 110 nm thick. The surface roughness of the ZnO thin film increases as the Zn buffer layer thickness increases.

• Transactions on Electrical and Electronic Materials
• /
• 제7권2호
• /
• pp.58-61
• /
• 2006

Carefully designed ZnO nanowire-film hybrid nanostructure, composed of a bottom ZnO film, ZnO nanowire arrays, and a top ZnO film, was consecutively fabricated by adjusting the supersaturation conditions using a metal-organic chemical vapor deposition (MOCVD) to utilize the vertically aligned ZnO nanowires as the oxygen sensors. The decrease of current flow through ZnO nanowire arrays increasing oxygen pressure showed the high potential for the application of the ZnO hybrid nanostructure to the oxygen sensors. In addition, it was confirmed that the oxygen sensing characteristics of this hybrid nanostructure were attributed to the defects near the surface of the nanowires.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.880-883
• /
• 2003

ZnO thin films for Film Bulk Acoustic Resonator(FBAR) were prepared by FTS (Facing Target Sputtering) system. The FTS methode enable to generate high density plasma, and it has a high deposition rate at 1mTorr pressure. Therefore, the ZnO thin films were deposited on $AZO/SiO_2/Si$ substrates with oxygen gas flow rate, and the other sputtering conditions were fixed such as a sputtering current of 0.8A, a substrate temperature at room temperature. AZO bottom electrode were deposited on $SiO_2/Si$ substrate and by Zn:Al(Al:2wt%) metal target. ZnO thin film thickness and the c-axis preferred orientation of ZnO thin film were evaluated by ${\alpha}-step$ and XRD.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.673-678
• /
• 2009

The effect of MgO buffer layer on the structural properties of sputter-grown ZnO thin film was investigated. Sapphire (0001) and Si (100) substrate were used for the growth and MgO buffer layer was inserted between ZnO thin film and the substrate. X-ray diffraction pattern indicated that enhanced crystallinity in the ZnO thin film grown was achieved by inserting very thin MgO buffer layer, regardless of the substrate type. The strain in the ZnO thin film could also be controlled by the insertion of the MgO buffer layer, and tendency of the strain was strongly dependent on the substrate type.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.112-112
• /
• 2010

Zinc Oxide (ZnO) thin-films were deposited according to the magnetron sputtering method. The deposited ZnO films were annealed with RTA equipment at various annealing temperatures in an vacuum ambient. The influence of the annealing temperature on the structural, electrical, and optical properties of the ZnO films was experimentally investigated, and the effect of conductivity of the ZnO active layer on the device performance of the oxide-TFT was tested. As a result, an increase of the annealing temperature was attributed to improvements of crystallinity in ZnO films. The grain size was found to lead to an increase of conductivity in the ZnO films. Fabricated ZnO TFTs with annealed ZnO active layer provided good performance in the TFT devices. Consequently, the performance of the TFT was determined by the conductivity of the ZnO film, which was related to the structural properties of the ZnO film.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.539-542
• /
• 2004

The $ZnGa_2O_4$ phosphor target is synthesized through solid-state reactions at the calcine temperature of $700^{\circ}C$ and sintering temperature of $1300^{\circ}C$ in order to deposit $ZnGa_2O_4$ phosphor thin film by rf magnetron sputtering system. The $ZnGa_2O_4$ phosphor thin film is deposited on Si(100) substrate and prepared $ZnGa_2O_4$ phosphor thin film is annealed by rapid thermal processor(RTP) at $700^{\circ}C$, 15sec. The x-ray diffraction patterns of $ZnGa_2O_4$ phosphor target and thin film show the position of (311) main peak. The cathodoluminescenre(CL) spectrums of $ZnGa_2O_4$ phosphor thin film show main peak of 420nm and maximum intensity at the substrate temperature of $500^{\circ}C$ and annealing temperature of $700^{\circ}C$ 15sec.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.248-249
• /
• 2008

ZnO (Zinc Oxide) thin film can be applied to various devices. Recently, ZnO film has been promoted in transparent TFTs (thin film transistors) because of high transparency and low temperature process. In this paper, ZnO thin films were grown on glass with the three conditions of RF sputtering power, which are 50W, 75W, 100W. Their structural, electrical and optical properties were investigated by using XRD, UV-Visible spectrometer and 4-point probes. In the ZnO film with 50W process, good crystallinity, high transmittance, and high sheet resistance were shown. In conclusion, the ZnO film with 50W can be an optimal channel layer of TFTs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.94-97
• /
• 2003

This study uses ZnO thin film as a piezoelectric material and Pt as bottom electrode for FBAR (film bulk acoustic resonator) device. ZnO thin film and Pt were deposited by RF-magnetron sputtering method. ZnO thin film and Pt were oriented to c-axis. Top electrode Al was deposited by thermal evaporation. The membrane was formed of bulk micromachining. The FBAR was evaluated by XRD, SEM and electrical characterization. The resonant frequency was measured by HP 8753C Network Analyzer. A fabricated FBAR device exhibited a resonant frequency of 700 MHz ~ 1.5 GHz. When bottom electrode and top electrode thickness were fixed, the resonant frequency was increased as decreasing ZnO thin film thickness.

• 반도체디스플레이기술학회지
• /
• 제13권1호
• /
• pp.91-95
• /
• 2014

(F,Ga) co-doped ZnO thin film on glass substrate was fabricated via a simple non-alkoxide sol-gel spin-coating. Contrary to the F single doped ZnO thin film, the (F,Ga) co-doped thin film showed a significant reduce in electrical resistivity after a second post-heat-treatment in reducing environment. The resulting decrease in electrical resistivity with Ga co-doping is considered to be resulted from the increases both carrier density and mobility. The optical transmittance of the (F,Ga) co-doped thin film in the visible range showed higher transmittance with Ga co-doping compared with F single doped ZnO thin film.

• 한국진공학회지
• /
• 제22권3호
• /
• pp.119-125
• /
• 2013

In-line magnetron sputtering system을 사용하여 대면적($60{\times}60cm^2$) 소다라임 유리기판위에 투명전도성 ZnO(Al)와 ZnO(AlGa) 박막을 500 nm에서 1,450 nm까지 두께별로 증착하여 전기적, 광학적 특성을 연구하였다. XRD를 통해 c-축 방향성(002)을 가지고 성장된 것을 확인 하였다. Hall 특성 분석을 통해 이동도 및 캐리어 농도의 특성을 확인 하였으며, 그에 따른 ZnO(AlGa)의 비저항이 $9.03{\times}10^{-4}{\Omega}{\cdot}cm$에서 $7.83{\times}10^{-4}{\Omega}{\cdot}cm$으로 ZnO(Al) 보다 높게 나타났으며, 가시광선 영역에서 투과율은 87.6%에서 84.3%으로 나타났다. 따라서 ZnO(AlGa)는 전기적 특성이 우수하고 높은 투과율로 대면적용 투명전도성 재료로의 활용에 적합한 특성을 지닌 것을 확인 할 수 있었다.