• Clean Technology
• /
• v.23 no.2
• /
• pp.196-204
• /
• 2017

CdZnS/ZnO composite was prepared through low-temperature precipitation and drying method. The property of CdZnS/ZnO as a recyclable photocatalyst for the degradation of rhodamine B (RhB) under visible light irradiation was examined. The sample was characterized by XRD, FE-SEM, XPS, UV-vis DRS and photoluminescence techniques before and after repeated reaction to investigate the change of properties during the photocatalytic reaction. During repeated reaction, the CdZnS/ZnO showed an improved photocatalytic activity and recycle stability. Among two feasible reaction pathways for photocatalytic degradation of RhB, the cleavage of conjugated chromophore was found to predominate over N-dealkylation of chromophore skeleton in the present work. The results indicate that the CdZnS/ZnO, prepared by a simple precipitation method, can be used as a visible-light driven photocatalyst with enhanced cycle stability and activity.

• Korean Journal of Materials Research
• /
• v.24 no.8
• /
• pp.413-416
• /
• 2014

The effects of an addition of CNT on the sensing properties of nano ZnO:CNT-based gas sensors were studied for $H_2S$ gas. The nano ZnO sensing materials were grown by a hydrothermal reaction method. The nano ZnO:CNT was prepared by ball-milling method. The weight range of the CNT addition on the ZnO surface was from 0 to 10%. The nano ZnO:CNT gas sensors were fabricated by a screen-printing method on alumina substrates. The structural and morphological properties of the ZnO:CNT sensing materials were investigated by XRD, EDS, and SEM. The XRD patterns revealed that nano ZnO:CNT powders with a wurtzite structure were grown with (1 0 0), (0 0 2), and (1 0 1) dominant peaks. The size of the ZnO was about 210 nm, as confirmed by SEM images. The sensitivity of the nano ZnO:CNT-based sensors was measured for 5 ppm of $H_2S$ gas at room temperature by comparing the resistance in air with that in target gases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1106-1110
• /
• 2003

The electrical characteristics of $A{\sim}C's$ ZnO varistors fabricated according to variable sintering condition, which sintering temperature is $l130^{\circ}C$ and speeds of pusher are A: 2mm/min, B: 4mm/min, C: 6 mm/min, respectively, were investigated. The varistor voltage of $A{\sim}C's$ ZnO varistors sintered at $1130^{\circ}C$ increased in order A < B $A{\sim}C's$ ZnO varistors exhibited below 2mA at rated voltage. Lightning impulse residual voltage of A's ZnO varistor suited standard characteristics, which is 3.85kV at 2.5kA, 4.4kV at 5kA and 5.16kV at 10kA. After multi lightning impulse residual voltage test of A's ZnO varistor exhibited good discharge characteristics which ZnO varistor reveals no evidence of puncture, flashover, cracking in visual examination. After high current impulse test of A's ZnO varistor exhibited good discharge characteristics, which variation rate of residual voltage is 0.4% before and after test, and revealed no evidence.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.165-172
• /
• 1997

CRT용 고전압 형광체인 ZnS를 저전압용에 적용하기 위해 ZnS 분말표면에 졸-겔법으로 SnO$_2$코팅조건을 연구하였다. Sn의 코팅량은 Sn/ZnS=0.02~0.07 범위에서 변화시켰으며, 코팅된 ZnS분말의 열처리는 450~90$0^{\circ}C$/2hr 범위에서 수행하였다. Sn/ZnS=0.035일 때 최적의 코팅이 이루어졌으며, 과도한 열처리는 ZnS에서 ZnO로 상전이가 발생하므로 500~$600^{\circ}C$ 정도가 안전한 조건임이 규명되었다. Sn량이 증가할수록 코팅된 ZnS의 형광강도는 감소하였으나 저전압 형광특성은 향상될 수 있는 가능성을 보여주었다.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.296-301
• /
• 2009

An inductively coupled plasma assisted atomic layer deposition(ICP-ALD) system has been constructed for the deposition of ZnO thin films, and various experiments of ZnO thin films on p-type Si(100) substrates have been carried out to find the self-limiting reaction conditions for the ICP-ALD system under non-plasma circumstances. Diethyl zinc[$Zn(C_2H_5)_2$, DEZn] was used as the zinc precursor, $H_2O$ as the oxidant, and Ar as the carrier and purge gas. At the substrate temperature of $150^{\circ}C$, atomic layer deposition conditions based on self-limiting surface reaction were successfully obtained by series of experiments through the variation of exposure times for DEZn, $H_2O$, and Ar. ZnO deposition was repeated at different substrate temperatures of $90{\sim}210^{\circ}C$. As a result, the thermal process window(ALD window) for ZnO thin films was observed to be $110{\sim}190^{\circ}C$ and the average growth rate was measured to be constant of 0.29 nm/cycle. Properties of the film's microstructure and composition(Zn, O, etc.) were also studied. As the substrate temperature increases, the crystallinity was improved and ZnO(002) peak became dominant. The films deposited at all temperatures were high purity, and the films deposited at high temperatures had the composition ratio between Zn and O closer to one of a stable hexagonal wurtzite structure.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1546-1549
• /
• 2018

We have investigated core-levels of ZnO thin films at the interface with the graphene on Cu foil using in-situ X-ray Photoelectron Spectroscopy (XPS). Spectral evolution of C 1s, Zn 2p, and O 1s are observed in real time during RF sputtering deposition. We found binding energy (BE) shifts of Zn 2p and 'Zn-O' state of O 1s depending on ZnO film thickness. Core-levels BE shifts of ZnO will be discussed on the basis of electron transfer at the interface and it may have an important role in the electronic transport property of the ZnO/graphene-based electronic device.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.15-20
• /
• 2007

Low temperature processed ZnO-TFTs on glass below $270^{\circ}C$ for plastic substrate applications were fabricated and their electrical properties were investigated. Films in ZnO-TFTs with bottom gate configuration were made by RF magnetron sputtering system except for $SiO_2$ gate oxide deposited by ICP-CVD. ZnO channel films were grown on glass with various Ar and $O_2$ flow ratios. All of the fabricated ZnO-TFTs showed perfectly the enhancement mode operation, a high optical transmittance of above 80% in visible ranges of the spectrum. In the ZnO-TFTs with pure Ar process, the field effect mobility, threshold voltage, and on/off ratio were measured to be $1.2\;cm^2/Vs$, 8.5 V, and $5{\times}10^5$, respectively. These characteristic values are much higher than those of the ZnO-TFTs of which ZnO channel layers were processed with additional $O_2$ gas. In addition, ZnO-TFT with pure Af process showed smaller swing voltage of 1.86v/decade compared to those with $Ar+O_2$ process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.217-217
• /
• 2010

산화물유전체/금속/산화물유전체(D/M/D) 구조의 투명전극은 우수한 통전성과 투광성을 갖는 동시에 근적외선 및 전자파 차폐가 가능하여 각종 디스플레이 장치로의 응용을 위해 많은 연구가 진행 중이다. 이러한 구조의 다층막의 경우 금속층과 산화물층간 계면에서의 산소확산으로 인한 광학적, 전기적 특성 저하가 문제가 되고 있다. 본 연구에서는 층간 산소확산방지를 통해 다층막의 전기적 특성을 개선하기 위해 $TiO_2$/Ag/$TiO_2$, $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ 구조의 다층막을 DC/RF 마그네트론 스퍼터를 이용하여 제조하여 ZnS 박막이 다층막의 특성에 미치는 영향을 비교 평가하였다. 제조된 박막의 전기적, 광학적, 계면 특성을 4-point probe, Spctrophotometer, AES을 이용하여 분석하였으며 PDP필터용 전극으로의 적용 가능성을 평가하였다.

• Journal of the Korean Magnetics Society
• /
• v.25 no.5
• /
• pp.156-161
• /
• 2015

The electronic structures of the potential candidate semiconductor nanoparticles for dye-sensitized solar cell (DSSC), such as $ZnSnO_3$ and $Zn_2SnO_4$, have been investigated by employing X-ray photoemission spectroscopy (XPS). The measured X-ray diffraction patterns show that $ZnSnO_3$ and $Zn_2SnO_4$ samples have the single-phase ilmenite-type structure and the inverse spinel structure, respectively. The measured Zn 2p and Sn 3d core-level XPS spectra reveal that the valence states of Zn and Sn ions are divalent (Zn 2+) and tetravalent (Sn 4+), respectively, in both $ZnSnO_3$ and $Zn_2SnO_4$. On the other hand, the shallow core-level measurements show that the binding energies of Sn 4d and Zn 3d core levels in $ZnSnO_3$ are lower than those in $Zn_2SnO_4$. This work provides the information on the valence states of Zn and Sn ions and their chemical bonding in $ZnSnO_3$ and $Zn_2SnO_4$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.609-609
• /
• 2013

나노선은 대표적인 일차원 나노구조로 높은 부피-표면적 비율과, 조절 가능한 밴드갭 에너지, 뛰어난 광학적/전기적 특성으로 인해 다양한 잠재적 응용처를 가지며, 많이 연구되고 있다. 특히 ZnO 나노선은 대표적인 광촉매로, 높은 감광성과 높은 부피-표면적 비율 등의 특징을 가지지만, 상대적으로 넓은 밴드갭 에너지 때문에 가시광선 영역을 사용하지 못하는 단점이 있다. 본 연구에서는 CuS 나노입자/ZnO 나노선 이종구조를 간단한 두 가지의 방법으로 합성하였다. ZnO 나노선은 간단한 수열합성 방법으로 합성하였고, 그 위에 CuS 나노입자를 successive ionic layer adsorption and reaction (SILAR) 방법으로 증착하였다. 합성된 나노 구조는 기존의 ZnO 구조와는 달리 가시광 영역에서도 향상된 광촉매 특성을 보였으며, 이는 ZnO와 CuS사이의 interfacial charge transfer (IFCT)에서 기인한 것이다. SEM, TEM, XRD를 통해 CuS/ZnO 이종구조의 형태와 결정구조, 구성성분을 분석할 수 있었고, Acid Orange 7의 광분해 실험을 통해 향상된 광촉매 특성을 확인 할 수 있었다.