• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.326-326
• /
• 2012

ZnO와 GaN는 비슷한 특성을 가지고 있다. 즉, 상온에서 ZnO의 밴드갭은 3.36 eV이며 GaN은 3.39 eV이고, 두 물질 모두 Wurzite 구조이며, 격자상수 또한 비슷하다. 밴드갭 에너지가 매우 큰 GaN와 ZnO는 청색 또는 자외선 영역의 발광 또는 수광 소자의 응용성을 가지고 있다. 특히, ZnO는 exciton binding energy가 상온에서 60 meV로 매우 큰 편이기 때문에 상온에서 발광소자로서 안정성을 보장할 수 있어서 발광소자나 광측정 장치 등에 응용이 기대되고 있다. 이러한 장점에도 불구하고 n-ZnO/p-GaN 이종접합 구조에 대한 연구가 아직까지 미미한 상태이다. 본 연구에서는 UHV 스퍼터링 장치로 상온에서 형성한 n-ZnO/p-GaN 이종접합 다이오드 구조에 대한 전기적 및 광학적 물성을 분석하였다. 먼저 p형 GaN 기판 위에 ZnO 박막을 증착한 후에, ZnO 박막의 결정성을 개선시키기 위해 rapid thermal annealing 시스템을 이용하여400, 500, $600^{\circ}C$에서 각각 1분 동안 후 열처리를 실시하였다. 이때 $600^{\circ}C$에서 후 열처리한 ZnO박막은 $5{\times}10^{16}cm^{-3}$인 n형으로 나타났다. n-ZnO/p-GaN 이종접합 다이오드구조에 대한 I-V 및 photoluminescence 측정 등을 통해 전기적 및 광학적 특성을 분석하였다.

• Korean Journal of Materials Research
• /
• v.15 no.5
• /
• pp.293-300
• /
• 2005

ZnO:Li epilayers were synthesized on sapphire substrates by the pulesd laser deposition (PLD) after the surface of the ZnO:Li sintered pellet was irradiated by the ArF (193 nm) excimer laser. The growth temperature was fixed at $400^{\circ}C$. The crystalline structure of epilayers was investigated by the photoluminescence (PL) and double crystal X-ray diffraction (DCXD). The carrier density and mobility of epilayers measured by van der Pauw-Hall method are $2.69\times10cm^{-3}$ and $52.137cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of epilayers obtained from the absorption spectra is well described by the Varshni's relation, $E_g(T)=3.5128eV{\cdot}(9.51\times10^{-4}eV/K)T^2/(T+280K)$. After the as-grown ZnO:Li epilayer was annealed in Zn atmospheres, oxygen and vaccum the origin of point defects of ZnO:Li has been investigated by PL at 10 K. The Peaks of native defects of $V_{zn},\;V_o,\;Zn_{int},\;and\;O_{int}$ showned on PL spectrum are classified as a donors or accepters type. We confirm that $ZnO:Li/Al_2O_3$ in vacuum do not form the native defects because ZnO:Li epilayers in vacuum existe in the form of stable bonds.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.3
• /
• pp.242-248
• /
• 2008

The structural, optical and electrical properties of ZnO films doped with 1.5 at% of 3A materials(B, Al, Ga, In) were studied by sol-gel process. The films were found to be c-axis (002) oriented hexagonal structure on glass substrate, when post heated at 500 $^{\circ}C$. The surface of the films showed a uniform and nano size microstructure and the crystalline size of doped films decreased. The lattice constants of ZnO:B/Al/Ga increased than that of ZnO, while ZnO:In decreased. All the films were highly transparent(above 90 %) in the visible region. The energy gaps of ZnO:B/Al/Ga were increased a little, but that of ZnO:In was not changed. The resistivities of ZnO:Al/Ga/In were less than 0.1 $\Omega$cm. All the films showed a semiconductor properties in the light or temperature, however ZnO:In was less sensitive to it. A figure of merit of ZnO:In had the highest value of 0.025 $\Omega^{-1}$ in all samples.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.3
• /
• pp.120-123
• /
• 2005

The 5 mol% ZnO doped $LiNbO_3$ film and the 2 mol% MgO doped $LiNbO_3$ film were grown on the $LiNbO_3$ (001) substrate by liquid phase epitaxy (LPE) method with $Li_2CO_3-V_2O_5$ flux system. The crytsallinity and the lattice mismatch between $Zn:LiNbO_3$, film and $Mg:LiNbO_3$, film were analyzed by x-ray rocking curve (XRC). In addition, the ZnO and MgO distribution in the cross-section of the multilayer thin films was observed using electron probe micro analyzer (EPMA).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.278-278
• /
• 2010

3.37 eV의 와이드 밴드갭과 60 mV의 높은 엑시톤 결합에너지를 갖는 반도체인 ZnO는 화학 및 열적 안정성, 압전특성 등 다양한 특성을 갖는 물질로써, 수열합성법을 이용하여 길이 $1.5{\mu}m$, 직경 100nm의 n-type ZnO 나노와이어를 성장시켰으며, P3HT는 유기 태양전지에서 가장 많이 사용되는 고분자 도너로써 열처리를 통하여 결정화 됨에 따라, 엑시톤의 확산속도나 전하의 이동도가 증가하여 더 많은 광전류를 생성하는 장점을 가지고 있다. 본 연구에서는 ZnO 필름이 아닌 n-type ZnO 나노와이어와 Poly(3-hexylthiophene) (P3HT)를 사용 하여 ZnO/P3HT 이종접합 태양전지를 제작하였다. 기판으로 글래스, 전극으로 ITO (Indium Tin Oxide), 나노와이어의 씨앗층으로 ZnO:Al를 스퍼터로 100nm 증착 하였다. Znc nitrate hydrate와 hexamethylenetetramine이 혼합된 수용액에서 기판을 담그고 n-type ZnO 나노와이어 성장 시키고, P3HT의 스핀 코팅조건과 열처리 온도를 변화시켜 P3HT의 두께와 결정화도가 ZnO/P3HT 이종접합 태양전지에 미치는 영향을 비교 분석 하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.4
• /
• pp.367-373
• /
• 2007

[ $In_2O_3-ZnO(IZO)$ ] and $In_2O_3-ZnO-SnO_2(IZTO)$ thin films were prepared on EAGLE 2000 glass webs in a Ar gas by RF-Magnetron sputtering. Electrical resistivity and optical transmittance of the films were investigated. IZO, IZTO film showed excellent optical transmittance of 85 % at the visible $400{\sim}$780 nm wavelength. Electrical properties of IZO film have $6.50{\times}10^{-4}{\Omega}cm$ (95 $In_2O_3$ : 5 ZnO wt.%) and $5.20{\times}10^{-4}{\Omega}cm$ (90 : 10 wt.%), IZTO film have $8.00{\times}10^{-4}{\Omega}cm$ (90 $In_2O_3$ : 3 ZnO : 7 $SnO_2$ wt.%) and $6.50{\times}10^{-4}{\Omega}cm$ (90 : 7 : 3 wt.%). Substitution of SnO to ZnO in ITO films showed slightly lower electrical conductivity than ITO film but showed similar optical transmittance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.11
• /
• pp.875-879
• /
• 2010

In this study, we have characterized the roles of $Cr_2O_3$ on the sintering and electrical properties of ZnO. The densification and grain growth of Cr-doped ZnO (ZCr) system was mainly influenced by Cr contents. In the beginning of sintering, the densification of ZnO was retarded as reducing the Zni concentration in ZnO lattice with Cr doping. And the densification and grain growth of ZnO was more retarded due to a formation of spinel phase with increasing the Cr contents. ZCr system revealed varistor behavior with nonlinear coefficient $\alpha$ of 3~23 depending on the sintering temperature, implying double Schottky barrier formation on the grain boundary of ZnO. Especially the best varistor characteristics should be developed with 0.1~0.5 at% Cr contents and under $1100^{\circ}C$ in ZCr systems.

• Korean Journal of Materials Research
• /
• v.32 no.3
• /
• pp.153-160
• /
• 2022

ZnO nanosheets have been used for many devices and antibacterial materials with wide bandgap and high crystallinity. Among the many methods for synthesizing ZnO nanostructures, we report the synthesis of ZnO/Zn(OH)₂ nanosheets using the ionic layer epitaxy method, which is a newly-developed bottom-up technique that allows the shape and thickness of ZnO/Zn(OH)₂ nanosheets to be controlled by temperature and time of synthesis. Results were analyzed by scanning electron microscopy and atomic force microscopy. The physical and chemical information and structural characteristics of ZnO/Zn(OH)2 nanosheets were compared by X-ray photoelectron spectroscopy and X-ray diffraction patterns after various post-treatment processes. The crystallinity of the ZnO/Zn(OH)₂ nanosheets was confirmed using scanning transmission electron microscopy. This study presents details of the control of the size and thickness of synthesized ZnO/Zn(OH)₂ nanosheets with atomic layers.

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.18-22
• /
• 1993

The cationic distributions and magnetic properties of $Cu_{x}Zn_{1-x}Fe_{2}O_{4}(0{\leq}x{\leq}1)$ have been studied by X-ray diffraction and $M\"{o}ssbauer$ spectroscopy. The crystal structures are cubic spinels in the range $0{\leq}x{\leq}0.9$. The ionic distribution of ${(Zn_{1-x}Fe_{x})}_{A}{[Zn_{x}Fe_{2-x}]}_{B}O_{4}$, where x=0.1. The distribution of $Fe^{3+}$ ions was extracted from the $M\"{o}ssbauer$ spectra below Curie temperature in the whole range $0{\leq}x{\leq}1$. The number of $Fe^{3+}$ ions in the tetrahedral sites and Curie temperature of Cu-Zn ferrite increase with increasing Cu-concentration.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1679-1681
• /
• 1996

ZnO varistor with composition of 89wt%-ZnO, 3.0wt%-$Bi_{2}O_{3}$, 3.6wt%-$Sb_{2}O_{3}$, 1.16wt%-CoO, 0.88wt%-NiO, 0.71wt%-$MnO_2$, 0.93wt%-$Cr_{2}O_{3}$, 0.013wt%-$Al_{2}O_{3}$ was fabricated by sintering methods. The effects of annealing on the J-E characteristics of ZnO varistors were investigated. These changes of electric properties were found to be caused by the variation of grains and grain boundary related to annealing. And the conductive mechanism and micostructure of ZnO varistor were researched using I-V meter, SEM and XRD.