• Journal of the Korean Chemical Society
• /
• v.39 no.3
• /
• pp.176-185
• /
• 1995

To improve photosensisitizing efficiency of ZnO/$H_2Pc(I)_x$ system, ZnO/$H_2Pc(I)_x$ system was dispersed in a typical photoconductive polymer of poly(9-vinylcarbazole)(PVCZ). The iodine dopant level(x) of ZnO/${\chi}-H_2Pc(I)_x$ is proportional to concentration of iodine, whereas x of ZnO/${\beta}-H_2Pc(I)_x$ decreased from the highest x=0.97 at more than $6.3{\times}10^{-3}$ M iodine solution. The Raman spectra of ZnO/${\chi}-H_2Pc(I)_x$ at 514 nm exhibited characteristic $I_3^-$ patterns in the range of 50∼550 $cm^{-1}$ at $x{\geq}0.57.$ The surface photovoltage of ZnO/${\chi}-H_2Pc(I)_{0.48}$/PVCZ was approximately 1.6 times greater than ZnO/${\chi}-H_2 Pc(I)_{0.48}$ and was 1.8 times of ZnO/${\chi}-H_2Pc(I)_{0.57}$/PVCZ at 670 nm. With ZnO/$H_2Pc(I)_x$/PVCZ, the highest iodine dopant levels showed a higher photovoltage. Therefore the injection of holes from H2Pc into PVCZ resulted in that photosensisitizing effect of ZnO/$H_2Pc(I)_x$/PVCZ system was improved compared to ZnO/$H_2Pc(I)_x$ case.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.97-98
• /
• 2008

n-ZnO/p-Si heterostructure is a good candidate for ZnO-based heterojunction light emitting diodes(LED) because of its competitive price and lower driving voltage. However, the conventional LED shows much lower extraction efficiency, because it has small top contact and large backside contact. In this structure, the injected current from the top contact enters the active region underneath the top contact. Thus, the emitted light is hindered by the opaque top contact. This problem can be solved by using a current-blocking layer(CBL) that prevents the current injection into the active region below the top contact.

• YAKHAK HOEJI
• /
• v.45 no.5
• /
• pp.557-564
• /
• 2001

To determine effects of zinc on lipopolysaccharide (LPS)-induced production of proinflammatory cytokines and Iymphokines in tumor-bearing ICR mice, this study has been investigated. Zinc chloride (Zn) at doses of 1 mg/kg was administered orally 30 minutes before i.p. injection of LPS (8 mg/kg) 5 times for 7 days. LPS greatly increased tumor necrosis factor (TNF)-$\alpha$ and interleukin (IL)-1$\beta$, in both serum and splenic supernatants compared with those in controls. However Zn strongly decreased LPS-increased production of TNF-$\alpha$ and IL-1$\beta$ in spleenic supernatants compared with those in controls and insignificantly also reduced in serum. LPS insignificantly decreased IL-2 levels in spleenic supernatants compared with those in controls but significantly increased interferon (IFN)-${\gamma}$ levels. Zn didn't affect IL-2 production in splenic supernatants compared to controls but significantly enhanced the LPS-decreased production of IL-2. Zn significantly increased IFN-${\gamma}$ levels in splenic supernatants compared to controls and did not affect the LPS-increased production of IFN-${\gamma}$. These findings suggest that Zn may strongly attenuate the LPS-induced pathogenesis of proinflammatory cytokines in tumor-bearing state and significantly up-regulate the LPS-induced function of T cells to produce IL-2 with maintaining normally the LPS- increased levels of IFN-${\gamma}$.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.287-294
• /
• 2012

ZnAl-LDH(layered double hydroxide) (Zn:Al=2:1 mole ratio) modified with stearic acid (SA) or oleic acid (OA) was synthesized by a coprecipitation method and compounded to SAN polymer at various contents. All the SAN composites were manufactured by a co-rotating twin-screw extruder and subsequently injection molded into several specimen. Morphology, transparency, and thermal resistance of these composites were evaluated by TEM, XRD(X-ray diffractometry), UV-Vis spectrophotometry, and thermogravimetric analysis. SAN nanocomposites containing OA-$Zn_2Al$ LDH showed better optical transmittance than SAN nanocomposites containing SA-$Zn_2Al$ LDH. All the SAN nanocomposites containing OA-$Zn_2Al$ LDH or SA-$Zn_2Al$ LDH exhibited improvement of thermal resistance at second stage of thermal oxidation. These results were explained by the fact that the interaction between organic modifier and polymer performed an important role in the property improvement of polymer nanocomposites.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1496-1501
• /
• 2002

A $2{\times}3$ factorial arrangement of treatments was used in a completely randomized design to determine the effects of dietary Zn on performance and immune response of acutely endotoxemic growing pigs (n=96, mean BW=24.9 kg). Factors included 1) intramuscular injection of $10{\mu}g/kg$ BW of Escherichia coli lipopolysaccharide (LPS) or control and 2) supplemental Zn at 10, 50, or 150 ppm. Diets were fed beginning after weaning (initial body weight=7.6 kg) in the nursery and continued for 16 d into the grower phase. The basal corn-soybean meal grower diet contained 1% lysine and 34.3 ppm Zn. Pigs were acclimated for 12 d in the growerfinishing facility before LPS treatment on d 13. Gain, feed intake, and feed efficiency were unaffected by dietary Zn. Feed intake decreased (p<0.10) and gain/feed was greater (p<0.10) from d 13 to d 16 for pigs injected with LPS. Serum Zn and alkaline phosphatase activity increased (p<0.05) with increasing Zn levels. The febrile response to LPS peaked at 6 h post exposure and pigs were afebrile within 12 h. Rectal temperature was greater (p<0.05) in pigs receiving 50 and 150 ppm Zn than in pigs supplemented with 10 ppm Zn. In vivo cellular immune response, measured on d 13 by skin thickness response to phytohemagglutinin (PHA), was greater after 6 h (p<0.05) in pigs fed 10 ppm Zn and exposed to LPS compared to all other treatments, but was not affected at 12, 24 or 48 h. Zinc did not affect mitogen induced lymphocyte proliferation. Zinc supplemented at 50 or 150 ppm resulted in an enhanced febrile response in pigs subjected to iatrogenic endotoxemia, but did not affect pig performance or immune response measurements.

• Journal of fish pathology
• /
• v.35 no.1
• /
• pp.77-92
• /
• 2022

Aquaculture development is based on the ideas of increasing production while reducing economic losses. Bacterial diseases are the leading source of fish cases. Citrobacter freundii has been linked to septicemia and mortality all over the world. In the current study, the cause of mortality in O. niloticus was C. freundii MW279218. External hemorrhages were seen on the affected fish, as well as paleness in the liver and kidney congestion. C. freundii MW279218 had a median lethal dosage of 1.5×10⁵ CFU/mL. Zinc oxide and zinc oxide nanoparticles (ZnO-NPs) were tested for their biocidal effectiveness against C. freundii MW279218. The lethal effect of ZnO-NPs for C. freundii MW279218 was 100% when compared to zinc oxide compound, and the inhibition zone width was 2.31.1mm at the highest tested concentrations (70 mg/L) compared to the lowest (35 and 45 mg/L, respectively). Fish were fed three different diets for 28 days: diet 1 (no additives), diet 2 (100 mg of ZnO-NPs/kg of feed), and diet 3 (200 mg of ZnO-NPs/kg of feed). Organs were also collected for histopathology 96 hours after injection (P<0.05). In the groups given 200 mg of ZnO-NPs, there was 10% mortality and 80% RPS. The group fed 100 mg of ZnO-NPs/kg, on the other hand, had 20% mortality and 60% RPS, compared to 50% mortality in the control positive group. Histopathological examinations demonstrated significant alterations in the control positive group and mild lesions in the hepatopancreas of the groups administered 100 mg ZnO-NPs/kg of feed. The groups fed 200 mg of ZnO-NPs/kg diet, on the other hand, showed no histological alterations. ZnO-NPs were found to be effective in the up regulation of both IL-10 and complement 5 immune-related genes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.428-428
• /
• 2013

Red color light emitting diodes were fabricated using CdSe/CdS/ZnS quantum dots (QDs). Patterned indium-tin-oxide (ITO) was used as a transparent anode, and oxygen plasma treatment on a surface of ITO was performed. Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was spin coated on the ITO surface as a hole injection layer. Then CdSe/CdS/ZnS QDs was spin coated and thermal treatment was performed for the cross-linking of QDs. TiO2 was coated on the QDs as an electron transport layer, and 150 nm of aluminum cathode was formed using thermal evaporator and shadow mask. The device shows a pure red color emission at 606 nm wavelength. Device characteristics will be presented in detail.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.597-602
• /
• 2015

Characteristics of continuous preparation of ZnO powder were investigated in a micro drop/bubble fluidized reactor of which diameter and height were 0.03 m and 1.5 m, respectively. The flow rate of carrier gas for transportation of precursors to the reactor was 6.0 L/min and the concentration of Zn ion in the precursor solutions was 0.4 mol/L, respectively. Effects of reaction temperature (973 K~1,273 K) and flow rate of micro bubbles (0~0.4 L/min) on the pore characteristics of prepared ZnO powder were examined. The optimum reaction temperature for the maximum porosity in the ZnO powder was 1,073 K within this experimental condition. The mean size of ZnO powder prepared continuously in the reactor decreased but the surface of the powder became smooth, with increasing reaction temperature. The injection of micro bubbles into the reactor could enhance the formation of pores in the powder effectively, and thus the mean BET surface area could be increased by up to 58%. The mean size of prepared ZnO powder was in the range of $1.25{\sim}1.75{\mu}m$ depending on the reaction temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.993-994
• /
• 2008

Electrochromic (EC) devices are capable of reversibly changing their optical properties upon charge injection and extraction induced by the external voltage. The characteristics of the EC device, such as low power consumption, high coloration efficiency, and memory effects under open circuit status, make them suitable for use in a variety of applications including smart windows and electronic papers. Coloration due to reduction or oxidation of redox chromophores can be used for EC devices (e-paper), but the switching time is slow (second level). Recently, with increasing demand for the low cost, lightweight flat panel display with paper-like readability (electronic paper), an EC display technology based on dye-modified $TiO_2$ nanoparticle electrode was developed. A well known organic dye molecule, viologen, was adsorbed on the surface of a mesoporous $TiO_2$ nanoparticle film to form the EC electrode. On the other hand, ZnO is a wide bandgap II-VI semiconductor which has been applied in many fields such as UV lasers, field effect transistors and transparent conductors. The bandgap of the bulk ZnO is about 3.37 eV, which is close to that of the $TiO_2$ (3.4 eV). As a traditional transparent conductor, ZnO has excellent electron transport properties, even in ZnO nanoparticle films. In the past few years, one-dimension (1D) nanostructures of ZnO have attracted extensive research interest. In particular, 1D ZnO nanowires renders much better electron transportation capability by providing a direct conduction path for electron transport and greatly reducing the number of grain boundaries. These unique advantages make ZnO nanowires a promising matrix electrode for EC dye molecule loading. ZnO nanowires grow vertically from the substrate and form a dense array (Fig. 1). The ZnO nanowires show regular hexagonal cross section and the average diameter of the ZnO nanowires is about 100 nm. The cross-section image of the ZnO nanowires array (Fig. 1) indicates that the length of the ZnO nanowires is about $6\;{\mu}m$. From one on/off cycle of the ZnO EC cell (Fig. 2). We can see that, the switching time of a ZnO nanowire electrode EC cell with an active area of $1\;{\times}\;1\;cm^2$ is 170 ms and 142 ms for coloration and bleaching, respectively. The coloration and bleaching time is faster compared to the $TiO_2$ mesoporous EC devices with both coloration and bleaching time of about 250 ms for a device with an active area of $2.5\;cm^2$. With further optimization, it is possible that the response time can reach ten(s) of millisecond, i.e. capable of displaying video. Fig. 3 shows a prototype with two different transmittance states. It can be seen that good contrast was obtained. The retention was at least a few hours for these prototypes. Being an oxide, ZnO is oxidation resistant, i.e. it is more durable for field emission cathode. ZnO nanotetropods were also applied to realize the first prototype triode field emission device, making use of scattered surface-conduction electrons for field emission (Fig. 4). The device has a high efficiency (field emitted electron to total electron ratio) of about 60%. With this high efficiency, we were able to fabricate some prototype displays (Fig. 5 showing some alphanumerical symbols). ZnO tetrapods have four legs, which guarantees that there is one leg always pointing upward, even using screen printing method to fabricate the cathode.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04a
• /
• pp.31-34
• /
• 2004

During the last 20 years organic semiconductors have attracted considerable attention due to their interesting physical properties followed by various technological applications in the area of electronics and opto-electronics. It has been a long time since organic solar cells were expected as a low-cost energy-conversion device. Although practical use of them has not been achieved, technological progress continues. Morphology of the materials, organic/inorganic interface, metal cathodes, molecular packing and structural properties of the donor and acceptor layers are essential for photovoltaic response. We have fabricated solar cell devices based on zinc-phthalocyanine(ZnPc) as donor(D) and fullerine$(C_{60})$ as electron acceptor(A) with doped charge transport layers, $Alq_3$ as an electron transport or injection layer. We observed the photovoltaic characteristics of the solar celt devices using the Xe lamp as a light source.