• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.11
• /
• pp.969-974
• /
• 1998

The effects of $La_2O_3$on the microstructure and electrical characteristics of Pr-based ZnO varistors were investigated. The average grain size increased in the range of 21.9~56.3$\mu$ m with increasing $La_2O_3$additive content(0.0~2.0 mol%). La was, of course grain boundary, largely segregated at the nodal point. As $La_2O_3$additive content increases, threshold voltage and nonlinear coefficient decreased and leakage current increased. In particular, 2.0 mol% $La_2O_3$-added varistor exhibited low threshold voltage 17.0V/mm and nonlinear coefficient of about 6. Based on these results, this varistor can be said to be used as low-voltage varistor, if nonlinear coefficient is somewhat improved forward.

• Journal of Korea Foundry Society
• /
• v.37 no.3
• /
• pp.63-70
• /
• 2017

In the present study, effects of an addition of Sn on the microstructure and corrosion behavior were investigated in Mg-4%Zn-(0-3)%Sn casting alloys. With an increase in the Sn content, the ${\alpha}-(Mg)$ dendritic cell size was reduced, whereas the total amount of precipitates increased due to the formation of the $Mg_2Sn$ phase. It was found in immersion and electrochemical corrosion tests that the addition of Sn has a detrimental effect on the corrosion resistance of the Mg-4%Zn alloy. Microstructural examinations of the corrosion product and the corroded surface indicated that an accelerated micro-galvanic effect by the $Mg_2Sn-phase$ particles and a less protective corrosion product on the surface were responsible for the increased corrosion rate at a higher Sn content.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.343-346
• /
• 1998

Degradation characteristics of the Pr-based ZnO varistor with $Y_2O_3$content (0.0-4.0 mol!%j were investigated. It was appeared that the variation of the J-E characteristics in the reverse direction before and after the applied stress with increasing $Y_2O_3$ content was larger than that of the forward direction but the variation was extrernly small. For all varistor, the leakage current with the stress time during the applied stress somewhat increased initialy but afterthat was almost constant or slightly decreased. The overall varistor voltage and nonlinear coefficient were less than 5%. Especially, in the case of Pr-based ZnO varistor containing 2.0 mol% to 4.0 mol% $Y_2O_3$, the variation of breakdown voltage and nonlinear coefficient was less than 1% and 5%. respectively. As a result, they showed good stability.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.131-141
• /
• 1994

To investigate differences in Cd and Zn contents in paddy soils and rice plants polluted by aerial emissions from the Janghang smelter, soil samples in the different directions and at the surface (0-15cm) and subsurface (15-30cm) in 1982 and 1990, and rice plants at the corresponding sampling sites in 1990 were collected from the Janghang Smelter Area. Soil samples were extracted with $4M-HNO_3$ and plant samples were digested with a mixture of $HNO_3$ and $HClO_4$for analyzing by atomic absorption spectrophotometry. The Cd and Zn contents in soils ranged from 0.09 to 4.42 and from 16.0 to 959.5mg $kg^{-1}$, respectively. The average contents of Cd and Zn in 1990 were higher than those in 1982. The Cd and Zn contents of soils near the center of the smelter were higher than those of soils farther from the center and also decreased in the order of east > north-north east > north east > north. The Cd and Zn levels in surface soils were higher than those in subsurface soils. The contaminated areas of Cd and Zn were within 4km in the east, and within 3km in the north-north east and the north east. Metal contents in brawn rice were the lowest in rice plants. The Cd content of brown rice was one sixth of that in leaf blade and in leaf sheath. The Cd content of leaf blade, stem and panicle axis were significantly correlated with the levels of Zn, Cu and Pb in soils, and Zn content of stem was significantly correlated with the levels of Cu and Pb. The Cd and Zn content in brown rice ranged from 0.05 to 0.25mg $kg^{-1}$ and from 10.5 to 30.9㎎ $kg^{-1}$ in the smelter area, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.48-53
• /
• 1998

The purpose of this study was to compare heavy metal concentrations in uncontaminated soil with those in soil influenced by industrial activities, and to investigate the relationship between change of heavy metal content and the kind of industry at the Iksan 1st Industrial Complex that has started since 1975. Soils sampled in 0-3㎝ and 3-6㎝ soil depth, respectively were analized for content of Cd, Cu, Ni, Pb and Zn. Change of heavy metal content in soil of the industrial complex were more accumulated 16 to 25% of Cd and Cu, 93% of Pb and Zn, respectively in samples compared with natural soil uncontaminated. But there was no different in Ni content between two soil. Distribution of Cd in soil layer of 0 to 3cm was the highest concentration of 5 ppm more at the textile industries, and then higher at the chemicals and the food processing industries. In 3 to 6㎝ soil layer Cd content was the highest concentration of 5 ppm more at the metal processing industries, and then higher at the textile industries. Cd accumulation in soil was different according to a kind of industry and soil depth. Cu content was the highest value of 400 ppm more in soil layer of 0 to 3cm at the manufacturing electric wires industry area and showed the accumulation phenomenon in soil layer 3 to 6cm at the ohmmeter, machines and electric wires industry area. Ni content was 35 ppm more in soil of the metal plating and processing industries regardless of soil sampling layer. Then it was 25 ppm more in soil of the building stones and semiconductor industries. Pb content was from 400 to 1000 ppm in soil of the chemicals and textiles industries regardless of soil sampling layer. Zn content was 1200 ppm more in soil of the chemicals and silk fabrics industries regardless of soil depth, and then lower in order to soil of leather processing${\le}$metal plating industries. In conclusion, changes of heavy metal kinds and content in soil of this industrial complex area were caused by the type or kinds of industrial activities. Changes of Pb and Zn content in soil were dominated at this area.

• Korean Journal of Organic Agriculture
• /
• v.20 no.3
• /
• pp.385-397
• /
• 2012

A pot experiment was carried out to examined the effect of electrolyzed micronutrients (Fe, Mn, Zn, Sr, Se, Sn, Co, Ti, and V) solution treatments with nutrient solution and SCB slurry on the mineral content and growth of tomato in cherry tomato (Lycopersicon esculentum). The treatment of nutrient solution (NS)+micronutrients solution (MS) significantly increased the concentrations of Li, Zn, Sr, Se, Ti as compared with that of NS alone in the cherry tomato fruits, and SCB+MS solution treatment significantly increased Li, Zn, Se, Co, Sr, and Ti contents as compared with SCB treatment. The micronutrient contents of MN+SCB+MS treatment were significantly higher in Li, Zn, Se, Co and in Ti than those of SCB and NS treatment, respectively. The growth and yield of cherry tomato fruits was highest with NS treatment. The yield indices of cherry tomato treated with NS+MS treatment and SCB+NS+MS were 97% and 94% of NS treatment. In conclusion, it seems to be possible to produce micronutrient-fortified cherry tomato by the mixed treatment of electrolyzed micronutrients.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.356-361
• /
• 2015

$Cd_{0.5}Zn_{0.5}S/ZnO$ composite photocatalysts were synthesized using the precipitation method and characterized by XRD, UV-vis DRS, PL and FE-SEM. Photocatalytic activities of the materials were evaluated by measuring the degradation of rhodamine B under visible light irradiation. Contrary to ZnO, $Cd_{0.5}Zn_{0.5}S/ZnO$ materials absorb visible light as well as UV and their absorption intensities in visible region increased with increasing the $Cd_{0.5}Zn_{0.5}S$ amount. The increment in the $Cd_{0.5}Zn_{0.5}S$ content in $Cd_{0.5}Zn_{0.5}S/ZnO$ also leads to reducing the particle size and consequently increasing the specific surface area. $Cd_{0.5}Zn_{0.5}S/ZnO$ materials with the larger $Cd_{0.5}Zn_{0.5}S$ content showed the higher activity in the photocatalytic degradation of rhodamine B under visible light irradiation. Therefore, the heterojunction effect between $Cd_{0.5}Zn_{0.5}S$ and ZnO as well as the adsorption capacity seems to give important contributions to the photocatalytic activity of the $Cd_{0.5}Zn_{0.5}S/ZnO$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.48-56
• /
• 1998

Pr\ulcornerO\ulcorner-based ZnO varistors were fabricated in the range of $Y_2$O$_3$additive content from 0.5 to 4.0mol%, and its microstructure and electrical properties were investigated. Yttrium was distributed nearly in the grain boundaries and the cluster phase formed at nodal point but more in cluster phase. The average grain size was decreased markedly from 34.9 to 8.6${\mu}{\textrm}{m}$ with increasing $Y_2$O$_3$additive content. It is believed that the decrease of grain size is attributed to the formation of cluster phase and the weakening of driving force for liquid sintering. As a result, $Y_2$O$_3$was acted as the inhibitor of the grain growth. With increasing $Y_2$O$_3$additive content, the varistor voltage, the activation energy, and the nonlinear exponent increased whereas the leakage current decreased, especially 4.0mol% $Y_2$O$_3$-added varistor exhibited very good I-V characteristics; nonlinear exponent 87.42 and leakage current 46.77nA. On the other hand, as $Y_2$O$_3$additive content increases, the varistor showed tendency of the salient decrease for donor concentration and the increase for barrier height. Conclusively, it is estimated that ZnO:Pr varistor compositions added more than 2.0mol% $Y_2$O$_3$are to be used to fabricate useful varistors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.541-544
• /
• 2002

In this study, a new LTCC material using $ZnWO_4$-LiF system was attempted with respect to use as a capacitor layer in Front-End Module. Pure $ZnWO_4$ must be sintered above $1050^{\circ}C$ in order to obtain up to 98% of full density. It's measured dielectric constant, quality factor, and temperature coefficient of resonant frequency were 15.5, 74380GHz, and $-70ppm/^{\circ}C$, respectively. LiF addition resulted in an liquid phase formation at $810^{\circ}C$ due to interaction between $ZnWO_4$ and LiF. Therefore $ZnWO_4$ with 0.5~1.5wt% LiF could be densified at $850^{\circ}C$. Addition of LiF slightly lowered the dielectric constant from 15.5 to 14.2~15. In the given LiF addition range, the sintering shrinkage increased with increasing LiF content. $Q{\times}fo$ value, however, decreased with increasing LiF content(or increasing densification). This is originated from the interaction between the liquid phase and $ZnWO_4$ and inhomogeneity of grain morphology.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.3
• /
• pp.109-113
• /
• 2008

High strength 7xxx series Al-Zn-Mg alloy have been investigated for using light weight automotive parts especially for bump back beam. The composition of commercial 7xxx aluminum has the Zn/Mg ratio about 3 and Cu over 2 wt%, but this composition isn't adequate for appling to automotive bump back beam due to its high resistance to extrusion and bad weldability. In this study the Zn/Mg ratio was increased for better extrusion and Cu content was reduced for better welding. With this new composition we investigated the effect of composition on the resistivity against stress corrosion cracking. As the Zn/Mg ratio is increased fracture energy obtained by slow strain rate test was decreased, which means degradation of SCC resistance. While the fracture energy was increased with Cu contents although it is below 1%, which means improvement of SCC resistance. These effects of composition change on the SCC resistivity were identified by observing the fracture surface and crack propagation.