• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.51-53
• /
• 2005

$Zn_{1-x}Cd_xO$ thin films were grown on (0001) sapphire substrates by pulsed laser deposition. The energy bandgap of $Zn_{1-x}Cd_xO$ films decreases withincreasing Cd content. An increase of Cd content also leads to the emission broadening and degraded crystallinity. The absorption edge and ultraviolet emission peak shift to lower energy from 3.357 eV to 3.295 eV and 3.338 eV to 3.157 eV, respectively, with increasing Cd content from 0.3% to 3%. The Stokes' shift between the absorption and emission indicates the increase of localization of exciton with Cd content.

• 한국융합학회논문지
• /
• 제8권11호
• /
• pp.287-292
• /
• 2017

자동차 부품에 Zn의 전기도금이 적용되고 있다. Zn 도금은 내식성을 증가시키기 위해 두께를 증가시키고 있다. 도금층의 두께가 증가함에 따라 전기도금 층이 파괴되는 문제가 제기되고 있다. Zn계 합금의 전기도금은 내부식성 향상 및 도금 두께 감소를 위해 연구되어 있다. 여러 합금 도금 중에 Zn-Co 합금 도금은 많은 관심을 받고 있다. 본 연구에서는 온도, 전류 밀도 및 전해용액 속 Co 함량과 같은 다양한 제조 조건에서 Zn-Co 전착의 조성을 조사하여 시료의 Co 함량에 대한 전기도금 조건의 영향을 파악하였다. 그 결과는 음극 과전압 및 확산 계수에 의해 설명하였다. 전류 밀도가 증가하고, 전해액 온도가 감소하고, 전해액 농도가 감소함에 따라 음극의 과전압이 증가한다. 음극의 과전압이 증가함에 따라 활성화분극보다 농도분극이 중요하게 된다. 농도분극은 확산 층 내에서 물질 전달은 확산에 의해 결정된다. 일정한 농도분극에서는 확산계수가 큰 원소가 다량 확산하게 된다. 즉 음극의 과전압이 증가함에 따라 확산계수가 큰 Zn 함량이 증가한다.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.57-61
• /
• 2004

Zinc Oxide (ZnO)은 wurtzite 결정구조를 가지고 있으며, 밴드갭 에너지가 약 3.3eV로 반도성 산화물이다. $In_2O_3$이 첨가된 ZnO 박막을 점자빔증착법을 이용하여 1737F 유리기판에 제조하였다. $400^{\circ}C$의 증착온도에서 $In_2O_3$의 첨가량에 따른 ZnO 박막의 결정성, 미세구조를 비롯한 전기.광학적 특성을 조사하였다. 첨가되는 $In_2O_3$의 양에 따라 투명전도성 산화막으로써의 ZnO 박막의 특성이 변화되었다. $In_2O_3$의 첨가량이 감소할수록 비정질상에서 결정성의 ZnO 막을 얻을 수 있었다. 0.2at%의 $In_2O_3$가 첨가된 출발물질에서 제조된 $In_2O_3$-doped ZnO막은 약 $6.0 {\times} 10^{-3} {\Omega}cm$ 정도의 비저항값과 가시광선 영역에서 85% 이상의 광투과도를 나타내었다.

• 한국포장학회지
• /
• 제20권2호
• /
• pp.41-49
• /
• 2014

This study illustrates the synthesis of gelatin based zinc oxide nanoparticle (ZnONPs) incorporated nanocomposite films using different concentrations of ZnONPs. The ZnONPs were oval in shape and the size ranged from 100- 200 nm. The nanocomposite films were characterized by UV-visible, FE-SEM, FT-IR, and XRD. The concentrations of ZnONPs greatly influenced the properties of nanocomposite films. The absorption peaks around 360 nm increased with the increasing concentrations of ZnONPs. The surface color of film did not change while transmittance at 280 nm was greatly reduced with increase in the concentration of ZnONPs. FTIR spectra showed the interaction of ZnONPs with gelatin. XRD data demonstrated the crystalline nature of ZnONPs. The thermostability, char content, water contact angle, water vapor permeability, moisture content, and elongation at break of nanocomposite films increased, whereas, tensile strength and modulus decreased with increase in the concentrations of ZnONPs. The gelatin/ZnONPs nanocomposite films showed profound antibacterial activity against both Gram-positive and Gram-negative food-borne pathogenic bacteria. The gelatin/$ZnONP^{1.5}$ nanocomposite film showed the best UV barrier and antimicrobial properties among the tested-films, which indicated a high potential for use as an active food packaging films with environmentally-friendly nature.

• 한국전기전자재료학회논문지
• /
• 제13권5호
• /
• pp.402-410
• /
• 2000

The electrical properties and stability of Pr$_{6}$/O$_{11}$-based ZnO wvaristors consisting of ZnO-Pr$_{6}$/O$_{11}$-CoO-Dy$_{2}$/O$_{3}$ based ceramics were investigated in the Dy$_{2}$/O$_{3}$ additive content range o 0.0 to 2.0 mol%. The density was nearly constant 5.62 g/cm$^3$corresponding to 97% of theoretical density as Dy$_{2}$/O$_{3}$ additive content increases up to 0.5 mol%. However the density decreased as Dy$_{2}$/O sub 3/ additive content is further additive content. Pr$_{6}$/O$_{11}$-based ZnO varistors doped with 0.5mol% Dy$_{2}$/O$_{3}$ exhibited a good nonlinearity, which is 37.76 in the nonlinear exponent and 5.36 $mutextrm{A}$ in the leakage current. And they exhibited very stress (0.80 V$_{1mA}$/9$0^{\circ}C$/12h)+(0.85 V$_{1mA}$/115$^{\circ}C$/12h)+(0.95 V$_{1mA}$/1$25^{\circ}C$/12h). Consequently it was estimated that ZnO-0.5 mol% Pr$_{6}$/O$_{11}$-1.0 mol% CoO-0.5 mol% Dy$_{2}$/O$_{3}$ based ceramics will be sufficiently used as a basic composition to develop the advanced Pr$_{6}$/O$_{11}$-based ZnO varistors in the future.he future.uture.he future.

• Journal of Advanced Marine Engineering and Technology
• /
• 제9권3호
• /
• pp.240-249
• /
• 1985

This paper presents the results of the galvanic anode's characteristicsin the Al-Zn-In-Mg and Al-Zn-In-Mg system anodes used aluminium ingot of low purity, 99.5% grade. The results of thses performance tests are as follows: 1) Zn, In and Mg are an available elements to improve the performance of Aluminium alloy anodes. 2) When the range of zinc content in the Al-Zn-In-Mg system anode is 2-5% the more zinc content, the more improve the anode performance. 3) Al-Zn-In-Mg system anode requires a long term over 50 days for the performance test. 4) The composition of Al-Zn-In-Mg system anode which shows the most excellent performance is Al-(2-3%) Zn-(0.02%) In-(1.0%) Mg. 5) When the Al-Zn-In-Mg system anode is annealed for an hour in 500 to 550 .deg. C, the anode performance is improved. 6) The lower average potential and the better corrosion pattern in the Al-Zn-Mg, Al-Zn-In and Al-Zn-In-Mg system anodes, the more current efficiency is improved.

• 한국주조공학회지
• /
• 제39권3호
• /
• pp.33-43
• /
• 2019

In this study, the effects of Zn additions on the mechanical properties of Al-Si-Mg-Cu alloys were investigated by increasing the amount of Zn up to 8wt.%. As the Zn content was increased up to 6 wt.%, the yield strength and elongation changed linearly without any significant changes in the size and shape of the main reinforcement phase. However, it was confirmed by SEM observation that the Mg-Zn phase formed between the reinforcement phases when the amount of Zn added exceeded 7wt.%. A Mg-Zn intermetallic compound formed between the $Mg_2Si$ phase, becoming a crack initiation point under stress. Thus, the formation of the Mg-Zn phase may cause a sharp decrease in the elongation when Zn at levels exceeding 7 wt.%. It was also found that the matrix became more brittle with increasing the Zn content. From these results, it can be concluded that the formation of the Mg-Zn intermetallic compound and the brittle characteristics of the matrix are the main causes of the remarkable changes in the mechanical properties of this alloy system

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3453-3458
• /
• 2011

The $Mg_xZn_{1-x}O$ thin films with the various content ratio ranging from 0 to 0.4 were prepared by sol-gel spincoating method. To investigate the effects of content ratio on the structural and optical properties of the $Mg_xZn_{1-x}O$ thin films, scanning electron microscopy (SEM), X-ray diffraction (XRD), and photoluminescence (PL) were carried out. With increase in the content ratio, the grain size of the $Mg_xZn_{1-x}O$ thin films was increased, however, at the content ratio above 0.2, MgO particles with cubic structure were formed on the surface of the $Mg_xZn_{1-x}O$ thin films, indicating that the Mg content exceeded its solubility limit in the thin films. The residual stress of the $Mg_xZn_{1-x}O$ thin films is increased with increase in the Mg mole fraction. In the PL investigations, the bandgap and the activation energy of the $Mg_xZn_{1-x}O$ thin films was increased with the Mg mole fraction.

• 한국세라믹학회지
• /
• 제55권1호
• /
• pp.55-60
• /
• 2018

In this study, quantum dots composed of $Mn^{2+}$ doped ZnS core and ZnS shell were synthesized using MPA precursor at room temperature. The ZnS: Mn/ZnS quantum dots were prepared by varying the content of MPA in the synthesis of ZnS shells. XRD, Photo-Luminescence (PL), XPS and TEM were used to characterize the properties of the ZnS: Mn/ZnS quantum dots. As a result of PL measurement using UV excitation light at 365 nm, the PL intensity was found to greatly increase when MPA was added at 15 ml, compared to the case with no MPA; the PL peaks shifted from 603 nm to 598 nm. A UV sensor was fabricated by using a sputtering process to form a Pt pattern and placing a QD on the Pt pattern. To verify the characteristics of the sensor, we measured the electrical properties via irradiation with UV, Red, Green, and Blue light. As a result, there were no reactions for the R, G, and B light, but an energy of 3.39 eV was produced with UV light irradiation. For the sensor using ZnS: Mn/ZnS quantum dots, the maximum current (A) value decreased from $4.00{\times}10^{-11}$ A to $2.62{\times}10^{-12}$ A with increasing of the MPA content. As the MPA content increases, the PL intensity improves but the electrical current value dropped because of the electron confinement effect of the core-shell.

• 한국토양비료학회지
• /
• 제31권2호
• /
• pp.107-113
• /
• 1998

퇴비, 석회, 규산 등 개량제 장기연용이 논 토양 및 현미중 중금속함량에 미치는 영향을 밝히기 위해 토양중 Cu 및 Zn의 연속침출($H_2O$, $KNO_3$, NaOH, $Na_2{^-}$, EDTA, $HNO_3$)을 수행하고 현미중 함량 및 토양의 화학성을 조사 분석한 결과는 다음과 같다. 퇴비, 석회, 규산 등을 장기연용한 토양의 Cu및 Zn에 대한 연속침출 결과 주된 형태는 각각 NaOH 침출성(유기태) 및 $HNO_3$ 침출성(황화물 및 잔류태)이였으며, 퇴비 장기연용으로 NaOH 침출성 및 EDTA 침출성(탄산염태) Cu함량은 증가하였고, 특히 Zn함량은 3요소 단용구보다 모든 형태에서 증가하였는데 상대적으로 증가폭이 적은 $KNO_3$ 침출성(치환태) Zn의 분포비율은 감소하였다. 개량제의 병용으로 $KNO_3$침출성 Zn함량 및 분포는 감소하였고 Cu는 일정한 경향이 없었다. NaOH 침출성 Cu함량은 유기물과 정의 상관을 보였고. 특히 Zn의 경우 모든 형태에서 유기물 및 치환성 K함량과 높은 정의 상관을 보였다. 토양의 O.M, CEC 및 양이온함량이 증가함에 따라 현미중 Cu함량은 감소하였으나 토양중 Cu 및 Zn의 모든 형태별함량과는 일정한 관련성이 없었다.