• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.1
• /
• pp.1-6
• /
• 1994

The present study was conducted to evaluate the effect of dietary levels of vitamin A on the lipid composition in rats fed Zn-deficient diets. Fifty male Sprague-Dawley rats were fed 5 experimental diets for 7 weeks. Rats were fed Zn-and vitamin A-deficient diet or the same diets supplemented with various levels of vitamin. A liver total lipid, cholesterol and triglycerides contents tended to decrease in Zn-deficient rats, but the supplementation of excess vitamin A enhanced those contents. Plasma cholesterol content was significantly higher in feeding Zn-deficient and excess vitamin A diet. Plasma triglyceride and phospolipid contents were higher in Zn-deficient groups, but not influenced by dietary levels of vitamin. A . Plasma HDL-cholesterol content was not changed by Zn-deficient diets. Plasma alkaline phosphatase activity was significantly reduced in Zn-deficient groups. Zinc contents of plasma and liver were influenced by the dietary level of zinc, but not changed by supplementation of vitamin A.

• Journal of the Korean Magnetics Society
• /
• v.2 no.3
• /
• pp.222-227
• /
• 1992

The effects of $V_2O_5$ addition as an additive on the densification, the microstructure and the magnetic properties of Mn-Zn ferrites were studied. The maximum density was observed at 0.1 wt% $V_2O_5$ content and it was recognized that a small content of $V_2O_5$ prohibited the discontinuous grain growth. The initial permeability showed maximum at 0.1 wt% $V_2O_5$ content and the power loss minimum at 0.03 wt% $V_2O_5$ content. It was found that a small content of $V_2O_5$ went into solid solution in the Mn-Zn ferrites, but above that extent $V_2O_5$ formed a second phase to be segregated at the grain boundaries.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.142-150
• /
• 1994

To investigate differences in Cd and Zn contents of paddy soils and rice plants polluted by the municipal and industrial waste water in the Mangyeong River Area, soil and plant samples were collected at several distances from the main inlet and at different depths of the soil. Soil samples were extracted with $4M-HNO_3$ and plant samples were digested with a mixture of $HNO_3$and $HClO_4$for analyzing heavy metals by atomic absorption spectrophotometry. The contents of Cd and Zn in soils ranged from 0.38 to 1.17 and from 33.8 to 464.6mg kg^{-1}, respectively. The average Cd level in 1990 was less than that in 1982, but the Zn level in 1990 was higher than that in 1982 in general. No variation in Cd contents was observed in soils at the different distances from the source of waste water, but Zn contents in soils were lower with the increasing distances from the source of waste water. A significant correlation was observed among Cd content, OM, available silicate, CEC and $Ca^{++}$. Similar results existed among Zn content of 1982, OM and $Ca^{++}$. The Cd content in subsurface soils of 1992 was significantly correlated with Zn, Cu, and Pb in soils, and the Zn content in soils was significantly correlated with the Cu and Pb in soils, regardless of years. The Cd content in leaf blades of rice was more than seven times higher than that in brown rice. The Zn content in rice was higher than that in leaf blades and in panicle axis. The Cd content in panicle axis and the Zn content in all parts of rice were correlated with Zn, Cu and Pb contents in soils. The Cd and Zn contents in brown rice ranged from 0.10 to 0.90mg $kg^{-1}$ and from 4.2 to 95.9mg $kg^{-1}$ in the Mangyeong River Area, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.40-43
• /
• 1995

In this paper, structual, optical and electrical properties of CdZnS thin films prepared by electron beam evaporation method were studied. The crysta1 structure of CdZnS films deposited was hexagonal type with preferential orientation of the (002) plane parallel to the substrate. The results of optical transmittance of the CdZnS film show that absorption edge is shifted to ZnS and optical bandgap was larger wish increasing ZnS content. The resistivity of the CdZnS film is decreasing with increasing ZnS content and mininum for 20 mole%.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.213-218
• /
• 2001

ZnO and ZnO:In films were deposited on the glass substrates by a spray pyrolysis method. It is found that ZnO films were polycrystalline with the preferred orientation (002) and have a hexagonal structure with lattice constants of a=3.242 $\AA$ and c=5.237 $\AA$. The crystalline structure of ZnO:In films deposited at the In content of 0~6.03 at. % were the same as that of ZnO films, but its lattice constants was slightly larger than those of ZnO films. The relative atomic ratios of metal ion of ZnO:In films were in accordance with those of the spray solution within the experimental error. The minimum resistivity of and the maximum carrier concentration of 19.1 $\Omega\cdot\textrm{cm}$ and the maximum carrier concentration of $2.11\times10^{19}\textrm{cm}^{-3]$ obtained from the ZnO:In films when In content was 2.76 at. %. The optical transmission of the sample grown at the In content of 3.93 at. % was about 95% in the wavelength between 400 and 800 nm.

• 연구논문집
• /
• s.23
• /
• pp.109-120
• /
• 1993

A study on corrosion and adhesion properties of evaporated Zn-Cr films were conducted on steel strip by two-source evaporater. Corrosion resistance of Zn-Cr coated steel was evaluated by salt spray test in 5% NaCl. Adhesion property of Zn-Cr films on steel substrate was evaluated by tape test after $180^\circC$ bending. Adhesion was improved with increasing the Cr content and reached the maximum at the Cr content of 6 to 8wt%. Corrosion resistance was enhanced with increasing the Cr content and improved by rolling Zn-Cr coated specimen, as a post-treatment.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.1
• /
• pp.13-22
• /
• 1997

In order to investigate the effects of microstructure Oil film on the welding spatter in Zn electroplated steel, Zn electroplated surface and layer structure with USS-Paddition was observed using XRD, XPS and optical microscopy. Wettability of water drop on the Zn electroplated steel surface was measured using Z.Mei model. Oil absorption test was carried out using Oil pen. Morphology of spot welding and spatter with USS-P addition, applied current, and oil-spray or oil-without was observed using SEM and optical microscopy. Surface morphology of Zn electroplated steel showed finer structure as USS-P content increased. Wettabiliy on the Zn electroplated surface decreased with increasing USS-P content. Size of welding trace increased and spatter occured arround the welding part as applied current increased, whereas spatter disappeared as USS-P content increased and disappeared in case of oil spraying on the Zn electroplated surface.

• Journal of the Korean Ceramic Society
• /
• v.54 no.3
• /
• pp.211-216
• /
• 2017

ZnO nanopowder was synthesized using a relatively facile and convenient glycol process. ZnO nanopowder was successfully synthesized at temperatures as low as $125^{\circ}C$ using zinc acetate as the Zn source and 1,4-butanediol as the solvent. Then, the effects of water content on the growth process and morphological evolution of ZnO powders were investigated using 1,4-butanediol and water as binary solvent mixtures. Using pure 1,4-butanediol at a temperature above $125^{\circ}C$, the prepared hexagonal ZnO nanopowder exhibited a quasi-spherical shape with average crystalline size of approximately 30 - 50 nm. It is also demonstrated that the morphology of ZnO powders can be controlled by the addition of various water content in 1,4-butanediol. With increasing water content, the morphologies of the ZnO powders changed sequentially from quasi-spherical to hexagonal plate and pyramid, and finally to hexagonal prismatic with a pyramidal tip. A sharp peak centered at 384 nm in the UV region and a weak broad peak in the visible region between 450 and 700 nm were shown in the room temperature PL spectra of the ZnO synthesized using the glycol process, regardless of the addition of water, suggesting that ZnO nanopowders with the best crystallinity were obtained under these conditions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1807-1818
• /
• 1991

The frictional characteristic of Zn-Ni electrogalvanized steel sheet was investigated by experimental procedures. To clarify the effect of surface property on the frictional characteristic of Zn-Ni coated steel sheet, Micro-hardness test, SEM analysis and X-ray diffraction analysis were carried out. Coefficients of friction for various stamping lubricant and Ni content in coated layer were measured by a draw bead friction test. The results show that frictional characteristic is very sensitive to Ni content of coated layer and depends on stamping lubricant. For Ni content less than about 11%, selection of proper lubricant is necessary to obtain low coefficient of friction in Zn-Ni coated steel sheet such as in case of cold rolled steel sheet.

• Journal of Environmental Health Sciences
• /
• v.13 no.1
• /
• pp.67-71
• /
• 1987

This study was intended to investigate the content of Cu, Mn, Zn in the dried milk powders except infant formula milkpowder from January to March, 1986. The content of the trace metals was determined by Atomic Absorption Spectrophotometry. The results were as follows: 1. Averages of Cu, Mn, Zn in the total samples were Cu, 0.3043 ppm Mn, 0.5101 ppm Zn, 26.006 ppm. 2. Averages and ranges of Cu, Mn, Zu in the whole milk powder were Cu, 0.2483, 0.216 - 0.48 Mn, 0.552 ppm, 0.336 - 0.732 ppm Zn, 28.961 ppm, 7.5 - 51.9 ppm. 3. Averages and ranges of Cu, Mn, Zn in the skim milk powder were Cu, 0.4095 ppm, 0.3 - 0.54 ppm Mn, 0.6907 ppm, 0.348 - 0.84 ppm Zn, 38.381 ppm, 30.6 - 55.2 ppm. 4. Averages and ranges of Cu, Mn, Zn in the modified milk powder were Cu, 0.3459 ppm, 0.12 0.948 ppm Mn, 0.2414 ppm, 0.096 - 0.348 ppm Zn, 7.752 ppm, 1.2 - 17.002 ppm. 5. It showed the highest amount of Cu, Mn, Zu in the skim milk powder group than in the other group and the lowest amount of Cu in the whole milk powder group and Mn, Zn in the modified milk group.