• 지질공학
• /
• 제30권4호
• /
• pp.525-539
• /
• 2020

본 연구지역은 피혁 제조공정에서 발생된 고형폐기물, 처리용수 및 유류 저장용기 등이 매립되어 있는 지역이다. 피혁폐기물 매립으로 발생된 침출수에 의한 오염영역을 파악하기 위하여 토양·지하수 오염도 조사 및 전기비저항탐사를 수행하였다. 토양오염 분석 결과 TPH와 아연 항목에서 토양오염 우려기준을 초과하였으며, 침출수 및 지하수의 경우 6가 크롬 항목이 지하수 정화기준을 초과하는 것으로 파악되었다. 전기비저항탐사는 토양·지하수 오염특성 및 확산경로를 파악하기 위하여 쌍극자배열법으로 전극간격이 5 m인 총 10개의 측선을 설정하였다. 토양·지하수 오염도 조사의 결과와 저비저항이상대가 비교적 잘 일치하였다. 따라서 본 연구지역과 같이 폐기물 매립에 따른 불규칙한 지층분포와 토양·지하수가 복합적으로 오염된 지역에서 전기비저항탐사를 병행하면 오염원에 의한 수직?수평적인 확산경로, 오염영역 및 향후 오염 예상지역에 대한 모니터링을 계획하는데 있어서 유용한 조사기법으로 사용될 수 있을 것이다.

• 한국토양비료학회지
• /
• 제43권3호
• /
• pp.275-282
• /
• 2010

The laboratory column experiments were used to transport of metal elements by infiltration-related dispersion and/or diffusion in mine tailing of the Guryong gold mine. The mine tailing shows the neutral pH (for a pore water) and contains quartz, chlorite, pyrite and calcite. Both a non-reactive solute ($Cl^-$ of 100 mg $L^{-1}$) and a reactive solute (1N HCl), were injected continuously through columns. The breakthrough curve in the non-reactive experiment reached at a maximum under 1.5 pore volumes (PV). The longitudinal dispersion (0.607 cm) and hydrodynamic dispersion coefficient ($1.96{\times}10^{-7}cm^{2}sec^{-1}$) were calculated by the slope. In the reactive experiment, the plateau curve was appeared in the pH values of 5.3, 4.5 and 1.7. The releases of metal elements such as Fe, Mn, Al, Cu, Zn, Pb, and Cd were observed to be related to the pH buffering. High concentrations of Mn, Cd and Zn were observed at the first pH plateau (4 PV and pH 5.3), whereas Fe, Cu, Al and Pb were released as the pH decreased to 4.0 or less. The resulting order of metals mobility, based on the effluent water, is Mn=Cd>Zn>Cu>Fe>Al>Pb.

• 한국재료학회지
• /
• 제26권10호
• /
• pp.549-555
• /
• 2016

We have investigated a glass-forming region of $V_2O_5-P_2O_5-ZnO$ glass and the effects of the addition of modifier oxides ($B_2O_3$) to the glass systems as a sealing material to improve the adhesion between the glass frits and a soda lime substrate. Thermal properties and coefficient of thermal expansion were measured using a differential scanning calorimetry, a dilatometer and a hot stage microscopy. Structural changes and interfacial reactions between the glass substrate and the glass frit after sintering (at $400^{\circ}C$ for 1 h) were measured by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscope. The results showed that the adhesion strength increases as the content of $B_2O_3$ at 5 mol% increases because of changes in the structural properties. It seems that the glass structures change with $B_2O_3$, and the $Si^{4+}$ ions from the substrate are diffused to the sealing glass. From these results, we could understand the mechanism of strengthening of the adhesion of soda lime silica substrate by ion-diffusion from the substrate to the glass.

• Advances in concrete construction
• /
• 제9권5호
• /
• pp.449-457
• /
• 2020

The influence of subsequent curing on the performance of fly ash contained mortar under steam curing was studied. Mortar samples incorporated with different content (0%, 20%, 50% and 70%) of Class F fly ash under five typical subsequent curing conditions, including standard curing (ZS), water curing(ZW) under 25℃, oven-dry curing (ZD) under 60℃, frozen curing (ZF) under -10℃, and nature curing (ZN) exposed to outdoor environment were implemented. The unsteady chloride diffusion coefficient was measured by rapid chloride migration test (RCM) to analyze the influence of subsequent curing condition on the resistance to chloride penetration of fly ash contained mortar under steam curing. The compressive strength was measured to analyze the mechanical properties. Furthermore, the open porosity, mercury intrusion porosimetry (MIP), x-ray diffraction (XRD) and thermogravimetric analysis (TGA) were examined to investigate the pore characteristics and phase composition of mortar. The results indicate that the resistance to chloride ingress and compressive strength of steam-cured mortar decline with the increase of fly ash incorporated, regardless of the subsequent curing condition. Compared to ZS, ZD and ZF lead to poor resistance to chloride penetration, while ZW and ZN show better performance. Interestingly, under different fly ash contents, the declining order of compressive strength remains ZS>ZW>ZN>ZD>ZF. When the fly ash content is blow 50%, the open porosity grows with increase of fly ash, regardless of the curing conditions are diverse. However, if the replacement amount of fly ash exceeds a certain high proportion (70%), the value of open porosity tends to decrease. Moreover, the main phase composition of the mortar hydration products is similar under different curing conditions, but the declining order of the C-S-H gels and ettringite content is ZS>ZD>ZF. The addition of fly ash could increase the amount of harmless pores at early age.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.127-131
• /
• 2005

We report a nanometer scale mark formation using a $PtO_x$ thin film or a TbFeCo rare-earth transition metal film and the mechanism. The multi-layer samples($ZnS-SiO_2/PtOx/ZNS-SiO_2,\;ZnS-SiO_2/TbFeCo/ZnS-SiO_2$) were prepared with a magnetron sputtering method on a polycarbonate or a glass substrate. By laser irradiation of approximately a few nanoseconds, nanometer scale marks were fabricated. During the fabrication process, the thin films were thermally reacted or inter-diffused during the laser irradiation. 75 nm bubble marks in the PtOx multi-layer sample by an approximately 4-ns laser irradiation. Inside the bubble mark, Pt particles with a few nanometer sizes are distributed. The $50{\sim}100$ nm bubble marks in the TbFeCo multi-layer sample by a few nanosecond laser irradiations. We will report the detail structure of the samples, the bubble mark formation process and the mechanism.

• 한국분말재료학회지
• /
• 제20권3호
• /
• pp.186-190
• /
• 2013

The electrochemical performance for the corrosion of zinc anodes according to particle size and shape as anode in Zn/air batteries was study. We prepared five samples of Zn powder with different particle size and morphology. For analysis the particle size of theme, we measured particle size analysis (PSA). As the result, sample (e) had smaller particle size with $10.334{\mu}m$ than others. For measuring the electrochemical performance of them, we measured the cyclic voltammetry and linear polarization in three electrode system (half-cell). For measuring the morphology change of them before and after cyclic voltammetry, we measured Field Emission Scanning Electron Microscope (FE-SEM). From the cyclic voltammetry, as the zinc powder had small size, we knew that it had large diffusion coefficient. From the linear polarization, as the zinc powder had small size, it was a good state with high polarization resistance as anode in Zn/air batteries. From the SEM images, the particle size had increased due to the dendrite formation after cyclic voltammetry. Therefore, the sample (e) with small size would have the best electrochemical performance between these samples.

• 자원환경지질
• /
• 제40권5호
• /
• pp.587-604
• /
• 2007

회동저수지의 호저퇴적물에 대하여 미량원소의 심도별 변화와 존재형태 및 이들의 상관관계에 대해서 알아보고자 하였다. 회동저수지의 5개 지점에서 깊이 21-41cm의 코어와 간극수를 채취하였다. 회동저수지 퇴적물 내 미량원소의 평균 총함량은 Zn $232{\pm}30.8mg/kg$, Cu $119{\pm}272mg/kg$, Pb $58.4{\pm}4.1mg/kg$, Ni $15.7{\pm}3.3mg/kg$ 및 Cd $1.6{\pm}0.3mg/kg$이었다. 회동저수지 안쪽으로 가면서 호저퇴적물 내 미량원소 함량이 감소하는 경향이 관찰되었다. 깊이에 따른 함량 변화는 시료채취 위치에 상관없이 Mn, Pb 및 Zn는 감소하는 반면, Cu와 Fe는 증가하였다. 간극수에 용해된 미량원소의 함량은 Fe>Mn>Cu>Zn의 순으로 낮았고 Cd, Ni 및 Pb는 검출되지 않았다. 간극수에 용해된 Zn, Cu, Fe 및 Mn 함량은 퇴적층의 하부로 가면서 증가하는 경향을 보여주고 있으며, 이는 상부로 미량원소가 확산되고 있음을 의미한다. 이러한 미량원소의 이동은 퇴적물-물과의 경계부분까지 전달될 것이며, 퇴적층 상부에서 비정질 철 및 망간 산화광물과 탄산염광물에 의하여 흡착되고 있다. 겉보기 분산계수 값을 이용한 결과, 각 미량원소의 상대적인 이동도는 Mn>Cu>Zn>Fe순이다. 연속추출결과, 미량원소의 표면집적이 비정질 산화광물형태와 탄산염광물 수반형태에 기인된 것임을 확인하였다. Cu, Fe, Mn 및 Zn의 간극수 내 함량은 호저퇴적물의 양이온교환형태와 밀접한 상관관계가 있음이 관찰되었다.

• Environmental Engineering Research
• /
• 제13권2호
• /
• pp.79-84
• /
• 2008

Adsorption of heavy metals by sawdust was investigated to evaluate the effectiveness of using sawdust to remove heavy metals from aqueous solutions. Kinetic and isotherm studies were carried out by considering the effects of initial concentration and pH. The adsorption isotherms of heavy metals fitted the Langmuir or Freundlich model reasonably well. The adsorption capacity of metal was in the order $Pb^{2+}$ > $Cu^{2+}$ > $Zn^{2+}$. A high concentration of co-existing ions such as $Ca^{2+}$ and $Mg^{2+}$ depressed the adsorption of heavy metal. Adsorption data showed that metal adsorption on sawdust follows a pseudo-second-order reaction. Kinetic studies also indicated that both surface adsorption and intraparticle diffusion were involved in metal adsorption on sawdust. Column studies prove that sawdust could be effective biosorbent for the removal of heavy metals from aqueous phase.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.436-437
• /
• 2008

Flexible CIGS thin film solar cell was fabricated using STS430 plate as a flexible substrate in this work. A diffusion barrier layer of $SiO_2$ thin film was deposited on STS430 substrate by PECVD followed by deposition of double layered Mo back contact. After depositing CIGS absorber layer by co-evaporation, CdS buffer layer by chemical bath deposition, ZnO window layer by RF sputtering and Al electrode by thermal evaporation, the solar cell fabrication processes were completed and its performance was evaluated. Corresponding solar cell showed an conversion efficiency of 8.35 % with $V_{OC}$ of 0.52 V, $J_{SC}$ of 26.06 mA/$cm^2$ and FF of 0.61.

• 한국분말재료학회지
• /
• 제11권1호
• /
• pp.69-73
• /
• 2004

The sintering characteristics of commercial 7xxx series Al-Zn-Mg-Cu alloy have been investigated. Sintering system of this blended elemental powder has aspects of both transient and supersolidus liquid phase sintering. Transient liquids occur when the constitution point during sintering lies in a solid phase region but where the sintering temperature is greater than either the melting point of one of the constituent or a eutectic temperature. Supersolidus liquid phase sintering occurs when a preblended powder is heated to a temperature between the solidus and liquids. However, these reaction were restrained their inter diffusion due to the appearance of the oxide film. Thus, 7xxx series Al alloy is extremely sensitive to process variables, including particle size, holding time and sintering temperature. Therefore, above phenomenons were observed formation and behaviour of the liquid by using SEM and DSC.