• 한국농공학회지
• /
• 제15권3호
• /
• pp.3096-3106
• /
• 1973

As a link in the chain of antidrought measure, our attempt is made to obtain basic informations on the construction of an infiltration gallary which can be supplied with irrigation water by catching of underground water in small river beds, which is economical, permanent and efficient. The experiment was made, concerning the structure of catchment conduits, by constructing a model sand tank $1.5m{\times}5m{\times}1.5m$ in dimension made of reinforced concrete. Various kinds of measuring equipment were attached to the model tank which contains a set of catchment conduits, each of them was made 30cm in diameter and 60cm in length with the ratio of sectional area to total area of influx holes 10:1, 20:1, 30:1. The average size of influx holes was fixed from 0mm to 10mm, 20mm and 30mm in diameter respectively. Obtained results are as follow; (a) In view of the water catchment capacity, manufacturing cost and the antipressure strength of the catchment conduits, it is the best method to decide the total number of influx holes 20 per sq. meter of each tile surface, and the size of influx holes 20mm in diameter, when the conduits have diameter less than 1m. (b) The greatest factor of safety against external load is to arrange the influx holes in a zigzag manner on the tile surface. The most effective formula of arrangement is $S{\geqq}\sqrt{2gd}$ where: s : spacing of opening row. g : spacing of opening line. d : diameter of influs hole.

• Journal of Biosystems Engineering
• /
• 제36권5호
• /
• pp.348-354
• /
• 2011

Various crop spacing methods have been implemented so far for the greenhouse and plant factory applications. However, there is no generally accepted parameter for evaluation of plant spacing efficiency in plant production system. In this study, 'Planted Area Index' (PAI) of a spacing method is defined as the ratio of the planted area in the field to required planted area using the spacing method when no transplanting operation is assumed. Three common types of spacing methods for plane placement of the plants were modeled mathematically. For calculating the planted area, an optimal growth radius function (R(t)) is needed. Function of the days after transplanting stage gives a radius of an optimal circle area for the living plants. A computer simulation was developed to calculate the PAI, based on three crop spacing methods and four optimal growth radius functions. In general, the 1-D zigzag spacing showed the best PAI. Moreover, it gives an example on how to apply the PAI for the design.

• 설비공학논문집
• /
• 제24권8호
• /
• pp.636-645
• /
• 2012

The performance of various type plate exchangers with different chevron angle, dimple size and arrangement was analysed by using Ansys v13.0. Heat transfer performance, pressure drop and flow patten of plate heat exchanger were investigated according to mass flow ratio investigated and compared. As a result, the $60^{\circ}$-chevron type plate heat exchanger showed the highest heat transfer performance but pressure drop was relatively high. The efficiency of $45^{\circ}$-chevron type plate heat exchanger showed the best performance in considering of heat transfer performance and pressure drop simultaneously. Among dimple type plate heat exchangers, the highest heat transfer performance was shown in a dim_zigzag type plate heat exchanger but pressure drop was very high. Besides, the dim_upsize plate heat exchanger showed very low pressure drop.

• 한국재료학회지
• /
• 제5권2호
• /
• pp.157-168
• /
• 1995

The effects of Mo additions on the microstructure and the room temperature deformation behavior of polysynthetically twinned (PST) crystals of TiAl were studied in order to get a basic conception for alloying additions on the two-phase TiAl compounds with the lamellar structure. It was found that the Mo additions in TiAl PST crystals increase both the yield stress and tensile elongation to fracture but the increase in yield stress deppend on the angle $\Phi$at which the lamellar boundaries lie from the loading axis. The large difference in yield stress between specimens deformed parallel($\Phi = 0^\circ$)or perpendicular($\Phi = 90^\circ$) to the loading axis and those deformed in intermediate orientations could be plained by the difference in Mo content between the TiAl and the $$Ti_{3}Al$ phases. It was also found that the Mo-doped specimens with intermediate orientation fail by cracking zigzag across to the lamellar boundaris, which is the same fracture mode as that of binary specimens with intermediate orientations tested in vacuum This suggests that Mo atoms are thought to play a role to reduce the environmental embrittlement of binary PST crystals, resulting in increasing the tensile ductility.

• 복식문화연구
• /
• 제16권4호
• /
• pp.661-680
• /
• 2008

The purpose of this study is to examine to change in the Chinese women's clothing according to the inflow of Western culture in the first half of the both century As for the research method, both literature and visual data are reviewed. Research results are as follows: The Step of transition in clothing by period followed beginning stage, adopted stage, early developed stage, fully developed stage, and static stage. fully developed stage showed a perfect compromise while being applied to Chinese costume with being introduced a three-dimensional cutting method of western clothing even to the constitution as well as to the appearance. Design elements from western clothing are as follows. The transition of silhouette is box silhouette, trapeze silhouette, shift silhouette, and fitted silhouette. In detail and trimming, tailored, band, convertible, shirts collar and zigzag, scallop, camisole neckline and puff, cap sleeve and flounced, bell shaped cuffs and western button, zipper, etc. are adopted. Finally, the Chinese modern style are formed by accepting and transforming the western clothing based on the traditional Chinese clothing.

• Bulletin of the Korean Chemical Society
• /
• 제35권11호
• /
• pp.3244-3248
• /
• 2014

Two ethylenediamine cobalt(II) oxalate complexes Co(ox)(en), 1 and $Co(ox)(en){\cdot}2H_2O$, 2 have been hydrothermally synthesized and characterized by single crystal X-ray diffraction, IR spectrum, TG analysis, and magnetic measurements. In 1, Co atoms are coordinated by two bis-bidentate oxalate ions in transconfiguration to form Co(ox) chains, which are further bridged by ethylenediamine molecules to produce 2D grid layers, Co(ox)(en). In 2, Co atoms are coordinated by bridging oxalate ions in cis-configuration to form Co(ox) chains, and the additional chelation of ethylenediamine to Co atoms completes 1D zigzag chain, Co(en)(ox). Two lattice water molecules stabilize the chains through hydrogen bonding. Magnetic susceptibility measurements indicate that both complexes exhibit weak antiferromagnetic coupling between cobalt(II) ions with the susceptibility maxima at 23 K for 1 and 20 K for 2, respectively. In 1 and 2, the oxalate ligands afford a much shorter and more effective pathway for the magnetic interaction between cobalt ions compared to the ethylenediamine ligands, so the magnetic behaviors of both complexes could be well described with 1D infinite magnetic chain model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.314-317
• /
• 2002

Since the early work of Tersoff and Hamann on the theory of the scanning tunneling microscope (STM), many theoretical approaches have been developed in order to gain further physical insight into the real space image that this technique provides. In this Paper, the STM image of Carbon nanotubes (CNT's) was calculated through the theoretical study. The optimized structure of CNT's was simulated using Brenner's hydrocarbon potential. The structure of simulation is (5. 5) armchair CNT and (10. 0) zigzag CNT. Also we have used that the extended Huckel tight binding (EHTB) theory already provides a fairly good qualitative description of the main processes that control the final contrast in the STM image. we found that the shape of the calculated images is hardly dependent on the exact electronic charge distribution at the surface. The STM images are not too sensitive to the precise electronic structure but, rather, they reflect its qualitative features. As a result of the simulation, The STM images of CNT's and the electronic density distribution were investigated. It found that the EHTB theory is appropriate for STM image calculation and that the STM images are in agreement with the result of Experiment.

• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.421-427
• /
• 2015

In this paper, a description is given of finite element method (FEM) simulations of the elastic bending modulus of multi-layered graphene sheets that were carried out to investigate the mechanical behavior of graphene sheets with different gap thicknesses through molecular mechanics theory. The interaction forces between layers with various gap thicknesses were considered based on the van der Waals interaction. A finite element (FE) model of a multi-layered rectangular graphene sheet was proposed with beam elements representing bonded interactions and spring elements representing non-bonded interactions between layers and between diagonally adjacent atoms. As a result, the average elastic bending modulus was predicted to be 1.13 TPa in the armchair direction and 1.18 TPa in the zigzag direction. The simulation results from this work are comparable to both experimental tests and numerical studies from the literature.

• Advances in nano research
• /
• 제9권4호
• /
• pp.251-261
• /
• 2020

In this article, vibration attributes of single walled carbon nanotubes based on Galerkin's method have been investigated. The influence of power law index subjected to different end supports has been overtly examined. Application of the Hamilton's variational principal leads to the formation of partial differential equations. The effects of different physical and material parameters on the fundamental frequencies are investigated for armchair and zigzag carbon nanotubes with clamped-clamped, simply supported and clamped-free boundary conditions. By using volume fraction for power law index, the fundamental natural frequency spectra for two forms of Single-Walled Carbon Nanotubes (SWCNTs) are calculated. The influence of frequencies against length-to-diameter ratios with varying power law index are investigated in detail for these tubes. MATLAB software package has been utilized for extracting tube frequency spectra. The obtained results are confirmed by comparing with available literature.

• PNF and Movement
• /
• 제15권3호
• /
• pp.281-290
• /
• 2017

Purpose: The purpose of this study was to examine the effect of an 8-week competitive exercise program on physical fitness, psychological variables, and video-game playtime in game-addicted adolescents. Methods: All subjects were screened by a game behavior diagnosis scale questionnaire, and a total of 7 game-addicted, male adolescents ($16{\pm}2$ yrs of age) participated in the study. All subjects were informed of the study's purpose, procedures, and risks, and a consent form was obtained from each subject. The 8-week soccer and basketball exercise program included twice-weekly sessions of 120 minutes per session. All data were presented as $mean{\pm}SE$, and the variables were analyzed with a paired t-test. Results: Following the 8-week intervention, cardiovascular endurance and grip strength were significantly increased (approximately 17 and 7%, respectively [p<0.05]). Although there was no statistical significance on flexibility, vertical jump, and zigzag-run, all variables showed an increasing tendency. Anxiety levels changed from a mild anxiety state to a normal state, and depression levels also altered from moderate to a normal state. The video-game playtime was reduced about 20% during weekends and vacation periods. Conclusion: Given these combined results, 8 weeks of regular participation in competitive exercise (soccer/basketball) may contribute to positive effects on physical fitness, psychological variables, and video-game playtime in computer-game addicted adolescents.