• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.1-10
• /
• 2017

This paper presents a novel predictive digital control method for boundary conduction mode PFC converters without the need for detecting the inductor current. In the proposed method, the inductor current is predicted by analytical equations instead of being detected by a sensing-resistor. The predicted zero-crossing point of the inductor current is determined by the values of the input voltage, output voltage and predicted inductor current. Importantly, the prediction of zero-crossing point is achieved in just a single switching cycle. Therefore, the errors in predictive calculation caused by parameter variations can be compensated. The prediction of the zero-crossing point with the proposed method has been shown to have good accuracy. The proposed method also shows high stability towards variations in both the inductance and output power. Experimental results demonstrate the effectiveness of the proposed predictive digital control method for PFC converters.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.389-390
• /
• 2007

In this paper, we propose a modified watershed algorithm to obtain exact edge of region. The proposed method adjusts priority at zero-crossing point of gradient in order to make the point of region decision time postponed. We compare the proposed method with a previous method and prove that this method can extract more correct edge of region.

• 한국인터넷방송통신학회논문지
• /
• 제20권4호
• /
• pp.143-148
• /
• 2020

교류 전압의 위상을 검출하여 제어하는 시스템의 경우 아날로그 제어방식에서는 검출한 위상에 대해 필터링에 의한 위상 offset 부분을 보상하여 제어에 응용하고 있다. 그러나, 디지털 제어방식에서는 이러한 위상 검출을 이용하여 제어할 경우 마이크로프로세서 혹은 마이크로 컨트롤러의 동작 주파수와 입력 위상 시간과의 오차로 인하여 정밀한 제어를 이룰 수가 없다. 일반적으로 사용하는 방식이 일정한 시간이 되면 누적된 오차를 임의로 보상하여 맞추어주는 방식인데 이러한 경우 보상하기 전까지는 오차를 지속적으로 가지고 갈 수밖에 없는 상황이 발생하게 된다. 이러한 문제점을 해결하기 위해서는 실시간으로 영점을 검출하여 마이크로프로세서의 동작 주파수에 맞도록 보상하는 방법이 필요하게 된다. 따라서 이러한 오차를 줄이면서 정밀한 디지털 제어에 응용하기 위해 본 논문에서 수행하고자 하는 연구는 다음과 같다. 1) 시뮬레이션 모델링을 통해 Zero Crossing Detection 알고리즘을 구현하여 영점을 검출을 통하여 동작 주파수에 맞도록 보상하는 방법에 관해 연구. 2) Microcontroller를 이용한 Zero Crossing Detection 설계를 통하여 실시간으로 영점을 검출하여 마이크로프로세서의 동작 주파수에 맞도록 보상하는 방법에 관해 연구. 3) Zero Crossing Detection 회로를 활용하여 BLDC 전동기의 회전자 위치 추정 연구.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.879-884
• /
• 2009

A Method for detection of saturation of a current transformer(CT) is proposed. The algorithm is initiated when the end point of a saturation period is detected. This detection is achieved by checking the time interval between the adjacent zero-crossing points of the second derivative of the secondary current. Once the end point of the saturation period is detected, the beginning point of the corresponding saturation period is determined by backward examination of the sum of the secondary current from the end point. The performance of the algorithm was evaluated for a-g faults on a 345 kV 100km overhead transmission line. The Electromagnetic Transient Program(EMTP) was used to generate fault current signals for different fault inception angles and different remanent fluxes. The performance evaluation shows that the proposed algorithm successfully detects the saturation period even in the presence of a remanent flux.

• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.134-141
• /
• 2022

This study presents a method for reducing current distortion that occurs when a dual-buck inverter generates reactive power. Dual-buck inverters, which are only capable of unity power factor operation, can generate reactive power capabilities by modifying a modulation technique. However, under non-unity power factor conditions, current distortion occurs at zero-crossing points of grid voltage and output current. This distortion is caused by parasitic capacitors, dead-time, and discontinuous conduction mode operation. This study proposes a modified modulation method to alleviate the current distortion at zero-crossing point of the grid voltage. A repetitive controller is applied to reduce this distortion of the output current. A 1 kVA prototype is built and tested. Simulation and experimental results demonstrate the effectiveness of the proposed method.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1168-1177
• /
• 2015

This paper presents a scheme to improve the line current distortion of power factor corrector (PFC) topology at the zero crossing point using a predictive control algorithm in both the continuous conduction mode (CCM) and discontinuous conduction mode (DCM). The line current in single-phase PFC topology is distorted at the zero crossing point of the input AC voltage because of the characteristic of the general proportional integral (PI) current controller. This distortion degrades the line current quality, such as the total harmonic distortion (THD) and the power factor (PF). Given the optimal duty cycle calculated by estimating the next state current in both the CCM and DCM, the proposed predictive control algorithm has a fast dynamic response and accuracy unlike the conventional PI current control method. These advantages of the proposed algorithm lower the line current distortion of PFC topology. The proposed method is verified through PSIM simulations and experimental results with 1.5 kW bridgeless PFC (BLPFC) topology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2104-2106
• /
• 2000

For general laser power supply. output of the secondary of the power transformer is connected to the rectifier and filter capacitor. The output of a rectifier is applied to a switching element in the secondary of the transformer. So, power supply is complicated and the loss of switching is considerably. In addition, according to increasing pulse repetition. charged energy of energy storage capacitor is not transferred sufficiently to flashlamp. and laser output efficiency decreases. In this paper, to improve laser efficiency. we designed and fabricated the power supply in which the SCR was turned on in zero point by the method of ZCC(zero crossing control)in result, laser output efficiency in creased by about 3.5% other than conventional supply. when a repetition rate was increased by 10[pps]. In 60[pps]. efficiency was about 20%.

• 전력전자학회논문지
• /
• 제21권5호
• /
• pp.449-452
• /
• 2016

This paper presents a simplified analysis on the rotor position detection error in sensorless interior permanent magnet brushless DC motor (BLDCM) drives, wherein terminal voltage sensing based on the back-electromotive force (back-EMF) zero-crossing point detecting circuitry is employed. The effect of a rotor saliency on the back-EMF's zero-crossing point detection is analyzed using the extended EMF-based voltage equation of the interior permanent BLDCM in a stationary reference frame, and thus the overall analysis is considerably simplified compared to the conventional one. Simulation results are provided to verify the effectiveness of the proposed method.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1995년도 제12회 음성통신 및 신호처리 워크샵 논문집 (SCAS 12권 1호)
• /
• pp.69-72
• /
• 1995

In this paper, a new approach for Korean connected digits recognition using the spatio-temporal neural network is reported. The data of seven digits phone numbers are used in the recognition of connected words, and in the initial experiment, digit recognition rate of 28% was achieved. In this paper, to increase recognition rate, two different approaches are analyzed. In the first system, to compensate the STNN's own defect and to emphasize the Korean word's phonic characters, the starting point of phone is pointed by comparing the average magnitude and zero-crossing rate and the ending point is pointed by comparing only zero-crossing rate. The digit recoginiton rate increased to 61%. Also, in the second system, to consider fact that same word's phone is varied severally, the number of STNN's of each word is increased from one to five, and then the varied same word's phones can be included to the increased STNN's. The digit recogniton rate of connected words increased to 89%.

• 한국음향학회지
• /
• 제2권1호
• /
• pp.35-40
• /
• 1983

수심 65m의 godutr에서 해면으로부터 10m 깊이에 수평 청음기 배열을 설치하여 수중소음의 상 관관계를 측정하였다. 분석은 FFT 방식을 이용하여 63Hz에서 315Hz 까지의 저주파 영역에서 True 상 관계수를 직접 얻었다. Buckingham의 천해모델과 비교한 결과 160 Hz 이하에서는 이론치와 거의 같았 으나 200Hz 이상에서는 이론치와 많은 차이를 보였다. 이는 200 Hz 이상에서 결과치의 Zero-Crossing point 가 이동된 것을 보보인면이나 Kuperman과 Ingenito의 천해 모델에서 NEAR-FIELD의 영향이 Zero-crossing point를 이동시킨다는 사실, 또 주파수가 높아질수록 해상상태의 영향을 받는다는 심해 수중소음의 상관관계에 대한 싫머결과등을 비교해 볼 Eio near-field 소음원의 영향을 무시한채 far-field 소음원의 영향만을 고려한 Buckingham의 천해모델이 갖는 제한성을 나타낸 것이라 볼 수 있다.