• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.167-168
• /
• 2023

The government has established a zero-energy roadmap in accordance with its 2050 carbon neutrality strategy, and from 2023 onwards, residential buildings with 30 generations or more must be constructed as zero-energy structures. In response to this, measures for energy conservation through enhanced building tightness are being developed. The LH (Land and Housing Corporation) aims to achieve the first-stage building tightness performance targets by 2022 in preparation for this. Currently, South Korea has the "KS L ISO9972 - Building Tightness - Measuring the airtightness of buildings by the fan pressurization method" as the method for measuring building tightness, which was established in 2006 and revised in 2016. In practice, the airtightness is measured using the Blower Door Test method, and it is expressed as ACH50 (the number of air changes per hour at a pressure difference of 50 Pa between the indoor and outdoor environments). This study aims to measure and analyze the airtightness of Happy Homes constructed from 2020 to 2022, categorized by building type.

• 한국환경과학회지
• /
• 제20권7호
• /
• pp.839-843
• /
• 2011

We have established a wind map of Singapore, a city-state characterized its land cover by urban buildings to confirm a possibility of wind farm development. As a simple but useful approximation of urban canopy, a zero-plane displacement concept was employed. The territory is divided into 15 sectors having similar urban building layouts, and zero-plane displacement, equivalent roughness height at each sector was calculated to setup a terrain boundary condition. Annual mean wind speed and mean wind power density map were drawn by a CFD micrositing model, WindSim where Changi International Airport wind data was used as an in-situ measurement. Unfortunately, predicted wind power density does not exceed 80 $W/m^2$ at 50 m above ground level which would not sufficient for wind power generation. However, the established Singapore wind map is expected to be applied for wind environment assessment and urban planning purpose.

• 산업기술연구
• /
• 제30권A호
• /
• pp.3-8
• /
• 2010

Recently, There have been many attempts to optimize energy usage in buildings and houses using Information Technology(IT) and the typical implementation can be found in Intelligent Building and Zero Energy Building. These kinds of buildings need to forecast the building loads, estimate the capacity requirement for power supply, and decide the capacity of the main transformer of the building. Currently, the capacity of the main transformer has been decided just using typical load estimation method not considering the load characteristics and patterns. In this paper, we propose a new load estimation method considering the load characteristics and patterns of the builiding. The proposed method was applied to actual mail center and verified the feasibility of application to actual design of buildings.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.222-223
• /
• 2018

Recent government policies are increasing interest in zero-energy housing, a building that minimizes energy consumption (90% reduction). As the importance of building passive performance is emphasized, the role of insulation is increasing as a way to reduce indoor heat loss in order to minimize the use of cooling and heating energy. There are two main types of insulation. Organic insulation is widely used for various construction structures such as construction and industrial due to some merits such as the convenience of construction and construction cost. However, it has been pointed out as a main cause every time a fire accident occurs, Jecheon Sports Center', the fire damage of buildings caused by the use of organic insulation materials is expanding to social problems, so it is urgent to research on nonflammable inorganic insulation materials.

• 한국태양에너지학회 논문집
• /
• 제40권3호
• /
• pp.21-31
• /
• 2020

The government mandates gradually zero energy building and Photovoltaic power generation systems installed in buildings are emerging as the most realistic alternative to increase the independence rate of building energy. In this study, we propose a method to reduce the power consumption of households by increasing the PV capacity of balconies and applying the method used the charged electric power stored in batteries after sunset. In order to evaluate the electric power energy savings of the residential BESS, a balcony PV 1.2 kW and a battery pack 2 kWh were installed for 9 houses in 4 apartments in Seoul and Gyeonggi-do. The BESS is charged when the balcony PV is generated electric power, and when solar power generation is finished, it supplies power to the electric appliances connected to the load. As a result of installing the solar PV module 1.2 kW and 2 kWh class BESS for 3 households located in Seoul and Gyeonggi-do, the average electric power consumption saving rate was 40%. The reduction in electricity consumption in the case of zero generation surplus power by maximizing the utilization rate of BESS has been improved to about 53%. Therefore, in order to increase the self-sufficiency rate of electric energy in apartment houses, it is effective to increase the solar photovoltaic capacity of the balcony and apply the residential BESS. In the future, it is believed that the balcony PV and home BESS will play a key role in achieving mandatory zero-energy housing.

• 한국기후변화학회지
• /
• 제2권4호
• /
• pp.283-295
• /
• 2011

기후변화에 대응하기 위한 온실가스 감축활동이 국 내외적으로 활발히 이루어지고 있다. 우리나라의 온실가스 감축에 있어서 건물부문의 온실가스 감축은 매우 중요한 부분이다. 2007년 기준 온실가스 총 배출량 610 백만톤 $CO_2e$ 중 건물이 차지하는 비중은 약 23%이며, 감축잠재량은 산업 부문에 이어 두 번째로 큰 수준이다. 본 연구는 향후 건물부문의 온실가스 감축 대책으로 추진될 "탄소제로건물" 건립에 필요한 기반자료를 제공하고자, 국내 최초로 지어진 업무용 "탄소제로 건물"인 국립환경과학원 기후변화연구동에 적용된 주요 기술, 에너지 부하 및 절감 에너지양, 경제성 평가를 수행하였다. 본 건물에 적용된 기술은 총 66가지로, 건물에너지 부하절감기술(30), 건물에너지 효율기술(18), 신 재생에너지 기술(13), 친환경 요소기술(5)이 적용되었다. 연간 총 에너지 부하($123.8kWh/m^2$)는 단열 강화와 고효율 설비 적용 등의 패시브 기술을 통해 40%($49kWh/m^2$) 절감하였으며, 잔여 에너지 부하인 60%($74.8kWh/m^2$)는 태양광, 태양열, 지열을 이용한 액티브 기술로 절감하였다. 건축비용은 일반건물 대비 약 1.4배 더 소요되었으나 액티브 기술을 제외하고 패시브 기술만 적용하게 되면 일반건물의 건축비용과 큰 차이를 보이지 않는 것으로 분석되었다. 건물에서 감축될 수 있는 온실가스양은 연간 $100ton{\cdot}CO_2e$ 수준이며, 에너지 자립으로 인한 연간 에너지 절감 비용은 약 102백만원, 온실가스와 대기오염물질 감축에 따른 부수적 수익은 연간 약 2.2 백만원 수준인 것으로 분석되었다. 또한, Life Cycle Cost (LCC) 분석 결과, 일반건물 대비 초과건축 비용에 대한 손익분기점은 20.6년으로 나타났다.

• 신재생에너지
• /
• 제19권1호
• /
• pp.22-30
• /
• 2023

Recently, the use of renewable energy has been increasing to achieve carbon neutrality. The concept of a zero-energy building is also attracting attention. In this study, a preliminary study was conducted to analyze the feasibility of a hybrid wind and solar power generation system between buildings that utilize the building wind generated by the Venturi effect. For this purpose, the wind speed and sunshine hours were monitored in the area where the building wind blows by the Venturi effect, and the power generation depending on system types, areas, and season was estimated. Consequently, the wind power generation system showed a larger amount of power per area than solar power. The wind power systems can generate larger power if wind power blades are installed along the height of the building. As a preliminary study, this study verified the feasibility of the system utilizing building wind and suggested follow-up studies.

• 한국지열·수열에너지학회논문집
• /
• 제17권4호
• /
• pp.28-35
• /
• 2021

The need for zero-energy building is increasing as a means of actively responding to climate change. Since pipe insulation is a factor that minimizes heat loss of cooling and heating facilities, it is necessary to check pipe insulation standards and prepare improvement plans of preparation for certification of zero energy buildings. In this study, domestic pipe insulation standards were checked to prepare new insulation standards based on energy performance. Through the development of a pipe insulation calculation program, the heat loss according to the insulation thickness of the piping for mechanical facilities was compared and reviewed. As a result, applying the insulation thickness of the KCS standard for the same conditions increased the heat loss by an average of 10% compared to the ASHRAE standard. For this reason, it is necessary to revise the pipe insulation thickness standard in consideration of heat loss due to thermal conductivity and pipe insulation thickness. Using the program in this paper, it is possible to design pipe insulation based on energy performance and help to determine the standard for pipe insulation thickness.

• 한국건설관리학회논문집
• /
• 제20권5호
• /
• pp.21-30
• /
• 2019

최근 전 세계적으로 지구온난화에 따른 이상기온과 화석연료 고갈 등 환경과 에너지문제는 인류의 생존을 위협하는 중대 과제로 대두되고 있다. 이에 따라 건축물 에너지 절감 및 온실가스 감축에 획기적으로 기여할 수 있는 혁신적인 건축물로서 제로에너지빌딩에 대한 관심이 높아지고 있다. 그러나 시장에서는 추가되는 건설비용은 제로에너지 인증 활성화에 큰 걸림돌이 되고 있다. 본 연구에서는 일반적인 민간 분양아파트를 연구의 대상으로 선정하고 초기 설계단계부터 제로에너지 인증을 위한 세부 요소들을 친환경주택 건설기준에 근거하여 제시하였으며, 인증 세부요소들의 비용효율분석을 통해 적정 가산비용을 제시하였다. 아직까지 기술수준과 물리적인 한계로 인하여 공동주택에서는 3등급까지만 인증이 구현 가능 한 것으로 분석되었다. 또한 생애주기동안 비용추이를 검토해본 결과 아직까지 제로에너지빌딩 5등급의 경우에서만 준공 후 13년 이내 모든 비용의 회수가 가능한 것으로 검토되었다. 앞으로 발주예정인 공동주택 사업 검토 시 본 연구에서 제시된 추가사업비가 적절히 반영되어 제로에너지빌딩 인증 활성화에 기여하고자 한다.

• 토지주택연구
• /
• 제11권1호
• /
• pp.87-94
• /
• 2020

To implement the planning of zero-energy buildings, their energy performance must be improved, and renewable energy applications must also be included. To accelerate the use of renewable energies in such buildings, BIPVs should be actively used in windows and on roofs. Window-type BIPVs are being developed in various forms depending on the size, composition, area ratio of the window, specification of glass, and so on. To analyze the applicability of various solar cells as window-type BIPVs, in this study, we evaluated their applicability, at the current development level, by analyzing the indoor illuminance, heat gain and heat loss; the cooling, heating, and lighting energy levels; and the generation performance of the various solar cells. To enhance the future applicability of window type BIPV, we analyze the overall energy performance of the building, according to changes in visible light transmittance and generation efficiency. The main research results are as follows. The area ratios above the standard illuminance, based on the window type and according to the VLT, were in order of low-e glazing, a-Si window, DSSC window, and c-Si window. The heat gain of the semi-transparent solar cell winodw was remarkably low. The energy consumption of buildings was highest in the order of c-Si window, DSSC window, a-Si window, and clear low-e window. However, in the case of including the power generation performance of the solar cell, the energy consumption was found to be high in order of DSSC window, c-Si window, a-Si window, and clear low-e window. In the future, if a window-type BIPV is developed, we believe that improvement in power generation performance and improvement in visible light transmittance will be needed.