• 대한치과교정학회지
• /
• 제34권4호
• /
• pp.351-362
• /
• 2004

고정식 교정 치료시 교정용 밴드가 장착된 치아의 치주조직 손상은 접착된 치아에서 보다 자주 발생한다. 일반 치과치료에 사용되는 시멘트는 세포독성을 지닌 것으로 알려져 있으므로 치주조직과 직접 접촉하거나 구강 내에서 밴드시멘트의 성분들이 용출되는 교정용 밴드 시멘트는 치주조직의 손상을 일으키는 원인이 될 수 있다 그러므로 교정용 밴드 시멘트의 생체 친화성은 재료의 물성과 함께 중요하게 고려되어야 할 사항이다. 이 연구의 목적은 교정용 밴드 시멘트의 세포독성을 평가하는 것으로 현재 임상에서 널리 사용되고 있는zinc phosphate cement (ZPC), glass ionomer (GI), resin modified glass ionomer (RMGI), compomer의 생체 친화성을 평가하기 위해 human gingiva fibroblast를 배양하고 이 세포에 대한 세포수 산정 및 세포 형태관찰, MTT(3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, 한천중층시험 등의 세포독성 검사를 시행하여 다음과 같은 결과를 얻었다. 1. 세포수 산정 및 형태 관찰 시험에서 Gl>ZPC, RMGI, RMG124, GI24>compomer24, ZPC24, compomer 순으로 세포독성이 높게 나타났다. 2. MTT assay 에서는 GI>ZPC, RMGI>GI24>ZPC24, compomer, RMGI24, compomer24 순으로 세포독성이 높게 나타났다. 3. 한천중층시험에서 는 GI>GI24, ZPC, ZPC24, RMGI>RMG124, compomer, compomer24 순으로 세포독성 이 높게 나타났다.

• Corrosion Science and Technology
• /
• 제4권1호
• /
• pp.15-18
• /
• 2005

Hydroxyapatite(HAp) was synthesized using the waste sludge from semiconductor process and used as an anticorrosive pigment. The water absorption of coating pigmented with anticorrosive pigment and the corrosion at interface between coating and substrate were monitored using AC impedance techniques. The anticorrosive performance of HAp was compared with those of red lead(RL) and zinc potassium chromate(ZPC), which have been known as representative anticorrosive pigments. The amount of absorbed water in ZPC- and HAp- pigmented coatings was much higher compared to that in RL-pigmented and unpigmented film. However, it seems that the water absorbed into HAp- or ZPC-pigmented film is beneficial to anticorrosive function. The anticorrosive performance of HAp is superior or at least comparable to those of ZPC and RL. The excellent anticorrosive properties of HAp can be explained by its passivating ability, caused by the reaction of the soluble component of HAp with Fe to form iron phosphate in the presence of water.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.321-337
• /
• 2000

Dental caries, one of the most frequent dental disease, become larger because it can be thought as a simple disease. Further more, it can progress to unexpected root canal therapy with fabrication of crown that needs reduction of tooth structure. Base is required in a large caries and ZOE, ZPC, glass ionomer are used frequently as base material. They, with restorative material, can affect the longevity of the restoration. In this study, we assume that the mandibular 1st molar has deep class I cavity. So, installing the 3 base material, 3 kinds of fillings were restored over the base as follows; 1) amalgam only, 2) amalgam with ZPC, 3) amalgam with ZOE, 4) amalgam with GI cement, 5) gold inlay with ZPC, 6) gold inlay with GI cement, 7) composite resin only, 8) composite resin with GI cement. After develop the 3-dimensional model for finite element analysis, we observe the distribution of stress and temperature with force of 500N to apical direction at 3 point on occlusal surface and temperature of 55 degree, 15 degree on entire surface. The analyzed results were as follow : 1. Principal stress produced at the interface of base, dentin, cavity wall was smallest in case of using GI cement as base material under the amalgam. 2. Principal stress produced at the interface of base, dentin, cavity wall was smaller in case of using GI cement as a base material than ZPC under gold inlay. 3. Composite resin-filled tooth showed stress distributed over entire tooth structure. In other words, there was little concentration of stress. 4. ZOE was the most effective base material against hot stimuli under the amalgam and GI cement was the next. In case of gold inlay, GI cement was more effective than ZPC. 5. Composite resin has the small coefficient of thermal conductivity. So, composite resin filling is the most effective insulating material.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.473-484
• /
• 1994

To investigate the effect of resin cement, which had been known to increase the adhesive capacity of the cast gold inlay, on the gingival marginal fit and whether the tin-planting of the beveled area affects the marginal fit, Class II cast gold inlays were made on the 25 sound molars. Control group(ZPC goup) was cemented with the ZPC by conventional method. Experimental groups were cemented with the resin cement(Super-hond & $Panavia_{EX}$) and subdivided further by the existence or nonexistence of the tin-plating of the beveled area(ST & PT groups: with plating, SNT & PNT groups: without plating). So, each group was consisted of 5 teeth and the gingival margin of each specimen was mesiodistally sectioned by 3 times and the marginal and internal gap were evaluated by the Stereo Microscope (${\times}180$) and the Scanning Electron Micrascope(${\times}5,000$) was used for examining the adhesive relationship of the resin cement to the cavity wall and to the cast gold surface. The results were as follows : 1. Marginal gap was less than internal gap in all groups. 2. ZPC and SNT(bevel without tin-plating) groups showed the least gap and gap in PNT(bevel without tin-plating) group, ST(bevel with tin-plating) group, PT(bevel with tin-plating) group showed the greater value in order in evaluation of the both internal gap and marginal gap. 3. With the exception of the relationships between ZPC and SNT groups, ST and PNT groups, relationships between any other groups showed the statistical significance in the internal gap(p<0.05). 4. In the marginal gap, all relationships between groups showed the statistical significance (p<0.05) except the relationships between ZPC and SNT groups, ST and PNT groups, ZPC and PNT groups. 5. ZPC group showed more soluble phenamena than the resin groups(ST, SNT, PT, PNT). 6. Resin cement showed the void spaces in spite of good penetration into the micro-irregularities on both the tooth surface and the cast surface. The void was shown more in PT and PNT groups than in the ST and SNT groups. 7. After the treatment of heat and desiccation for SEM specimen, resin cements were detached more easily from the tooth surface than from the cast surface.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.134-140
• /
• 1992

The purpose of this study was to investigate the antibacterial effect of zinc oxide eugenol(ZOE), zinc phosphate cement(ZPC), glass ionomer cement, resin, and Vitapex to S. muntans, S. sanguis, S. fecalis and E. coli by agar diffusion method. Four wells were punctured in mitis-salivarius agar plate per each group and each wells were filled with restorative matetials. The width of inhibition zones produced in mitis - salivarius agar were measured as the parameter of the antibacterial effect after 16 hours and 40 hours. In S. mutans and S. sanguis, the largest inhibition zone was produced on ZOE, followed by glass ionomer cement, and ZPC. Inhibition zones was not observed in resin and Vitapex. In S. fecalis, ZOE and glass ionomer cement showed wider inhibition zone than ZPC. In E. coli, ZOE showed wider inhibition zone than ZPC, but no inhibition zone was observed on glass ionomer cement.

• 한국통신학회논문지
• /
• 제29권8A호
• /
• pp.868-878
• /
• 2004

본 논문에서는 멀티미디어 트래픽을 효율적으로 서비스하기 위해 CDMA 순방향 링크에 제안되었던 Zone-based 전력제어 방식(1)의 역방향 링크 적용 타당성을 검증 및 분석하였다. Zone-based 전력제어 방식을 운용하기 위해서는 각 트래픽 채널에 할당되는 최대 전력량이 결정되어야 한다. 순방향 링크에서는 기지국의 전력 자원을 다수의 트래픽 채널이 공유하기 때문에 각 트래픽 채널에 할당 가능한 최대 전력 자원을 결정하는 메커니즘이 요구되지만, 역방향 링크에서는 서비스 단말별로 전송되는 트래픽 채널에 할당 가능한 최대 전력 자원이 결정되어져 있는 특성으로 인해 Zone-based 전력제어 방식이 쉽게 구현될 수 있다. 실험 결과는 Zone-based 전력제어 방식이 기존의 전력제어 방식에 비해 전력 소비량과 이동국의 트래픽 성능에 있어서 향상된 결과를 보여주었다. 결국 Zone-based 전력제어 방식은 멀티미디어 트래픽 환경에서 고속 데이터호의 서비스 반경을 셀의 전체 서비스 반경으로 확보할 수 있게 하고, 시스템 내에 생성되는 간섭 량을 억제하여 저속 음성호의 QoS도 적절히 보장해줄 수 있는 방안임을 확인하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제11권5호
• /
• pp.35-42
• /
• 2006

본 논문에서는 황화철($FeS,\;FeS_{2}$) 유기 용매의 환원적 분해 반응과의 표면특성의 관계에 대해서 다음과 같은 결과를 얻었다. hexachloroethane(HCA)은 수소첨가반응, 탈염소제거반응과 탈수소탈염소화반응으로 pentachloroethane(PCA), tetrachloroethylene(PCE), trichloroethylene(TCE)와 cis-1,2-dichloroethylene(cis-1,2-DCE)로 분해되었다. FeS와 $FeS_{2}$를 반응 매개물로 HCA에 대한 반응에서 FeS는 $FeS_{2}$보다 분해반응 속도가 빠르게 나타났다. FeS와 $FeS_{2}$의 표면 특성 연구에서 각 광물질에 대한 친수성 표면 자리(Ns)를 정량적으로 계산하기 위해서 비표면적 값($107.0470m^{2}/g$와 $92.6374m^{2}/g$)과 표면 전위를 측정에 측정된 $PH_{ZPC}(FeS,\;PH_{ZPC}=7.42,\;FeS_{2},\;PH_{ZPC}=7.80)$ 값을 이용해서 계산한 결과 FeS와 $FeS_{2}$의 $N_{s}$값은 각각 $0.053\;site/nm^{2},\;0.205\;site/nm^{2}$으로 나타났다. 그리고 0.2 g/L Fe광물질에 대한 실질적인 친수성 표면 농도는 각각 $3.303{\times}10^{-6}\;mol/L$와 $1.102{\times}10^{-5}\;mol/L$ 나타났다. $FeS_{2}$는 FeS에 비해 훨씬 친수성 표면임을 실험 결과 확인하였다. FeS와 $FeS_{2}$의 두 광물질 중에서 유기 용매의 환원 반응 속도는 FeS가 훨씬 빠르게 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.64-72
• /
• 1994

Zinc Phosphate Cement hand been used for about more than 100 years in luting of cast gold inlay. But many scientists had been trying to develop the new form of luting agent because the ZPC hand shown the lack of adhesiveness on the tooth structure and the toxicity to the pulp tissue. Recently many researches about the surface treatment of the cast body are being done to increase the adhesion of cement to it. The conventional Class I gold inlays were fabricated in the 20 permanent molars. After the internal surface of the cast body was sandblasted with $Al_2O_3$ particles and was tin-plated, the inlays were cemented with adhesive cement [G I cement and resin cement(Super-Bond & $Panavia_{EX}$)] and the evaluation on the adhesion pattern, adhesive strength and the fracture pattern of the adhesive cast gold inlay was compared to that of the cast gold inlay cemented conventionally with ZPC. The results were as follows : 1. The surface roughness of the cast body was increased significantly after sandblasting with the $Al_2O_3$ particles and the tin oxide layer, which was consisted of round particles, came into being. 2. The bond strength was in the order of Super-Bond, ZPC, Fuji I, $Panavia_{EX}$ group. The group cemented with Super-Bond showed statistically greater strength than the other groups(p<0.05). 3. The group cemented with ZPC was fallen apart by principal adhesion failure and that with Fuji I was by complete adhesion failure. But the group with Super-Bond showed pricncipal cohesive failure pattern and in the group with $Panavia_{EX}$, complete cohesive fracture pattern was shown and small protion of tooth structure was fractured out with cast body and the fractured surface showed the figure just as the enamel prism. 4. Various gaps were shown at the pulpal side regardless of little gap at the side walls of the cavity in all groups. Only the Super-Bond was attached to the tooth structure and the other cements were detached from both the tooth and the cast body.

• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.225-232
• /
• 1992

The purpose of this study was to compare the bond strength of the glass ionomer luting cements after the functional loads were applied to the crowns respectively 10 min, 30 min, 1 hr, 24 hrs later after mixing of cements. The conventional (GC Fuji I; GC Int. Co., Japan), water hardening type (Ketac Cem; ESPE, W. Germany) glass ionomer luting cement and C-dent ZPC (Confi-Dental Products Co., U.S.A.) as a control were used. The results of this study were obtained as follows: 1. In the bond strength of GC Fuji I, 24 hr-group was highest and there were no statistically significant differences among 10 min-, 30 min- and 1 hr- groups. 2. l3 the bond strength of Ketac Cem and C-dent ZPC, there was no statistically significant differences among 10 min-, 30 min-, 1 hr- and 24 hr-groups respectively. 3. Comparing the bond strength among cements in 10 min-, 30 min-groups respectively, GC Fuji I was lowest and there was no statistically significant difference between Ketac Cem and C-dent ZPC. 4. The bond strengths between GC Fuji I and Ketac Cem were not significantly different in 1 hr-, 24 hr-group. 5. The bond strengths among 3 types of cements were not significantly different in 24 hr-groups.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.379-386
• /
• 2001

This study was performed to evaluate the sealing ability of various retrograde filling materials by using bacterial penetration and dye penetration test. One hundred and forty extracted human teeth with single, straight canals and mature apiece were collected and used for this study. All canals were instrumented using an engine driven Ni-Ti file (ProFile). After removing 3mm from the apex of tooth, a standardized 3mm root end cavity was prepared using an ultrasonic instrument. The 70 teeth were randomly divided into 7 groups : 6 groups for retrograde filling using Super-EBA, ZOE, Chelon-Silver, IRM, ZPC and amalgam. The 7th group was used as a negative control. Nail varnish was applied to all external root surfaces to the level of the reseated root ends to prevent lateral microleakages. The specimens were then sterilized in an ethylene oxide sterilizer for 24 hours. 2 mm of the reseated root was immersed in a culture chamber containing a Tripticase Soy Broth with a phenol red indicator. The coronal access of each specimen was inoculated every 72 hours with suspension of Proteus vulgaris. The culture media were observed every 24hours for color change indicating bacterial contamination. The specimens were observed for 4weeks. The remaining 70 teeth were submitted to a dye penetration test. The canals of all teeth were first sealed with AH26 and obturated using an Obtura II system. Root resection, root end preparation and retrograde filling was performed as above. All specimens were suspended in 2% methylene blue dye for 72 hours before being ion gitudinally split. The degree of dye penetration was then measured using a stereomicroscope at 10 magnification and evaluated. The results were as floows : 1. In the bacterial penetration, the degree of leakage was the lowest in the Super-EBA, followed by, in ascending order, ZOE, Chelon-Silver IRM and ZPC. The amalgam showed highest bacterial leakage of all(p<0.01). 2. In the dye penetration, the degree of microleakage was the lowest in the Chelon-Silver and Super-EBA, followed by, in ascending order, IRM, ZPC. The ZOE and amalgam showed the highest microleakage of all (p<0.05). These results suggested that the eugenol based cement, Super-EBA, have excellent sealing ability as a retrograde filling material.