• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.267-270
• /
• 2014

As Smart Device research processes, the needs of information security in light devices is increasing. For example, Zigbee provide Information Security by applying $AES-CCM^*$ defined IEEE 802.15.4 standard. However, according to information security law in Korea, only devices with KCMVP certification can be used in government organization and facilities. Therefore, this paper provide a solution to apply ARIA-CCM and ARIA-GCM for KCMVP in reserved field of IEEE 802.15.4 standard. For analyzing performance, we provide the speed test result of ARIA-CCM and ARIA-GCM comparing with $AES-CCM^*$.

• Journal of Multimedia Information System
• /
• v.6 no.3
• /
• pp.131-138
• /
• 2019

With the rapid evolution of communication technology, it became possible to overcome the spatial and temporal limitations faced by humans to some extent. Furthermore, the quality of personal life was revolutionized with the emergence of the personal communication device commonly known as the smart phone. In terms of defense networks, however, due to restrictions from the military and security perspectives, the use of smart phones has been prohibited and controlled in the army; thus, they are not being used for any defense strategy purposes as yet. Despite the current consideration of smart phones for military communication, due to the difficulties of network configuration and the high cost of the necessary communication devices, the main tools of communication between soldiers are limited to the use of flag, voice or hand signals, which are all very primitive. Although these primitive tools can be very effective in certain cases, they cannot overcome temporal and spatial limitations. Likewise, depending on the level of the communication skills of each individual, communication efficiency can vary significantly. As the term of military service continues to be shortened, however, types of communication of varying efficiency depending on the levels of skills of each individual newly added to the military is not desirable at all. To address this problem, it is essential to prepare an intuitive network configuration that facilitates use by soldiers in a short period of time by easily configuring the strategy network at a low cost while maintaining its security. Therefore, in this article, the author proposes a Zigbee-based local strategic network by using Opnet and performs a simulation accordingly.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.15-20
• /
• 2019

Due to evolving IoT technologies, the various application services using clothing, sport equipment, and wearable devices equipped with extream small communication devices have been actively developed. On the other hands, since these serveices requires long distance communications, Long Distance wireless communication technology LPWAN Research has been proceeded due to limitation of the commuication distance of Wi-Fi and Zigbee which were considered as representative technologies for IoT. Iin this paper, we introduces LoRa technology in detail, which is a non-band network technology among LPWAN technologies, and investigates the use cases of domestic as well as international countries.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1014-1017
• /
• 2009

Ubiquitous makes it possible to expand a short-distant wireless communications infra and provide various services. Especially, it is very important to develop multimedia contents service technology through ZigBee and WPAN technology. But because the data transmission rate of IEEE 802.15.4 Standard ZigBee is low, there are many barriers for multimedia contents services. In this paper, to improve ZigBee that has the limitation of transmission rate in IEEE 802.15.4 Standard, an upgraded model to 1Mbps through MAC Layer remodeling is designed. And Zigbee-based broadcasting multimedia contents services system is designed and implementation to provide the service in Ubiquitous environment.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.867-874
• /
• 2023

In this paper, a wireless communication-based sensor data monitoring device with an explosion-proof (Exd IIC) case was implemented to enable installation at explosion-risk industrial sites such as plants. In existing industrial plant sites, most of the temperature sensors and vibration and impact sensors are wired up to several kilometers, which takes a lot of time and money to bury long pipes and cables. In addition, there are not many cases where some wireless devices have been applied to actual plant industry sites due to communication quality problems. Therefore, in order to solve this problem, zigbee mesh wireless communication was applied to provide high reliability wireless communication quality to industrial plant sites, and the time and cost incurred in new or additional installation of sensors could be greatly reduced. In particular, in the event of loss or error of some wireless communication devices, the communication network is automatically bypassed or recovered to enable real-time data monitoring.

• The KIPS Transactions:PartC
• /
• v.16C no.6
• /
• pp.699-706
• /
• 2009

The convergence tendency accelerates the realization of the ubiquitous healthcare (u-Healthcare) between the technology including the power generaation and IT-BT-NT of the ubiquitous computing technology. By rapidly analyzing a large amount of collected from the sensor network with processing and delivering to the medical team an u-Healthcare can provide a patient for an inappropriate regardless of the time and place. As to the existing u-Healthcare, since the sensor node all transmitted collected data by using with the Zigbee protocol the processing burden of the base node was big and there was many communication frequency of the sensor node. In this paper, the u-Healthcare system in which it can efficiently apply to mobile apparatuses it provided the transfer rate in which it is superior to the bio-signal delivery where there are the life and direct relation which by using the Bluetooth instead of the Zigbee protocol and in which it is variously used in the ubiquitous environment was designed. Moreover, by applying the EEF(Embedded Event Filtering) technique in which data in which it includes in the event defined in advance selected and it transmits with the base node, the communication frequency and were reduced. We confirmed to be the system in which it is efficient through the simulation result than the existing Electrocardiogram Measurement system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.267-273
• /
• 2012

The short-range communication module was developed in this paper which is suitable for the point-to-multipoint circumstances of 40 terminals communicating frequently in about 50 meters. The media access control layer of this communication module using asynchronous time-division multiplexing provides a fast and robust performance even in the worst case of simultaneous transmission events, and low packet error rate was measured a in LOS (Line-of-sight) circumstance by adding the function of acknowledge response to media access control layer. The difference test was carried out in order to measure the performance of point-to-multipoint communication. Two communication modules are respectively measured and graphed in 10 branches to 40 branches. The communication module developed in this paper showed a faster performance than the commercial Zigbee module in the specific case presented in this paper. Especially, in over 20 branches showed wide differences of the transmission speed. This results is caused by more network overhead of Zigbee whose wider applications needs the network layer and applicaiton layer besides media access control layer. Also, the asynchronous time-division multiplexing proposed in this paper are more suitable than CSMA-CA of Zigbee module when a lot of module ought to be frequently communicated in small area.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.123-132
• /
• 2012

Gas sensors has been used very differently that depending on following purposes; Automotive (exhaust gas, fuel mixture gas, oxygen, particulates), agriculture / food industry (fresh, stored, CO2, humidity, NH3, nitrogen oxide gas, organic gas, toxic gas emitted from pesticides and insecticides), industrial / medical (chemical gas, hydrogen, oxygen and toxic gases), military (chemical weapon), environmental measurements (CO and other air pollution consisting of sulfur and nitrogen gas), residential (LNG, LPG, butane, indoor air, humidity). The types of industrial toxic substances are known about 700 species and many of these exist in gaseous form under normal conditions. he multi-gas detection sensors will be developed for casualties that detect the most important and find easy three kinds of gases in marine plant; carbon dioxide(CO2), carbon(CO), ammonia(NH3). Package block consists of gas sensing device minor ingredient, rf front end, zigbee chip. Develope interworking technology between the sensor and zigbee chip inside a package. Conduct a performance test through test jig about prototype zigbee sensor module with rf output power and unwanted emission test. This research task available early address when poisonous gas leaked from large industrial site and contribution for workers' safety at the enclosed space.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.114-123
• /
• 2007

As a promising technology that enables ubiquitous computing and will lead the information technology industries of the next generation, the new field of sensor networks is one of the most active research topics today. From now on, each node, the network formation, and even the sensor network itself will interact with the generic network and evolve dynamically according to environmental changes, in a process of continual creation and extinction. In this paper, we propose a address-Internetworking scheme for interactive networking between a sensor network and the Internet based on the TCP port-numbers. The proposed scheme enables internetworking between a sensor network address scheme based on Zigbee and the Internet address scheme based on the Internet Protocol version 6 (IPv6). We implement the proposed address-Internetworking scheme using Berkeley TinyOS, Mica Motes, and IP. In addition we verify the proposed scheme by an interconnection experiment, which involves wireless sensor networks and the Internet, using IPv4/IPv6.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.1201-1202
• /
• 2017

최근 IoT 관련 제품들과 IoT를 구현하기 위한 저전력 무선통신에 대한 관심이 높아지고 있다. 저전력 무선통신의 대표적인 예로는 BLE, Zigbee, Wifi, Z-Wave 등이 있다. 본 논문에서는 이러한 저전력 무선통신을 이용하는 디바이스들과 실시간으로 연동할 수 있는 저전력 무선통신 인터페이스 플랫폼을 설계하는 방법을 설명한다.