• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.430-436
• /
• 2014

This paper relates to the study about the street security light management system. The purpose of the wireless remote management system is to manage street security lights efficiently. The system is composed of three components like light controller, CDMA gateway and web based remote management server. The zigbee solution is adopted to make local wireless network between street security lights. The CDMA network is used for the wireless communication between street security light controller and the remote control center. The gateway to interconnect zigbee network and CDMA was designed with low power 32 bits Cortex M3 micro-controller. For the data communication between the management server and the gateway, SMS and socket based TCP streaming is used. The management server sends SMS to the gateway to deliver light control and management requests, and the gateway replies with the light controllers report via TCP streaming. By using both SMS and TCP streaming communication, it was verified that simple cost effective management is possible for street security lights. We tried real test for 95 street security lights in real environment during two months and analyzed the practical possibility for mass supply.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.75-81
• /
• 2009

In this paper, USN of wireless communication with easy to install and effectiveness with variety information gathering has been proposed as a alternative of wired-based line for transmission of fire sensing data. But, The sensor node using USN should be considered for wireless transmission range and reliability of information. In this study, the zigbee protocol sensor node was implemented and then tested transmission range of sensor node as 10m interval using voltage information of DC 3V & 5V. Here, maximum transmission distance was confirmed 90m inside-outside. When used mesh routing relay node, distance was not limited. In USN network building, when fire sensing data transmitted, the sensing data same between direct sensing data from sensor and collecting data at USN. Therefore, was confirmed reliability for transmission range and information of proposed zigbee sensor node.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2413-2418
• /
• 2007

IN wireless sensor networks (WSNs), one challenging issue is to In wireless sensor networks (WSNs), one challenging issue is to construct a virtual backbone in a distributed and localized way while considering energy limitation. Dominating set has been used extensively as core or virtual backbone in WSNs for the purposes like routing and message broadcast. To ensure network performance, a good dominating set construction protocols should be simple and avoid introducing extra message. In addition, the resulting dominating set should be small, connected, and take into account the energy level at each node. This paper studies efficient and simple virtual backbone construction protocol using defer time in IEEE 802.15.4- based WSNs (e.g. Zigbee). The efficiency of our proposed protocol is confirmed through simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1723-1728
• /
• 2021

C-ITS is an intelligent transportation system that can improve transportation convenience and traffic safety by collecting, managing, and providing traffic information between components such as vehicles, road infrastructure, drivers, and pedestrians. In Korea, road infrastructure is being built across the country through the C-ITS project, and various services such as real-time traffic information provision and bus operation management are provided. However, the current state-of-the-art road infrastructure and information linkage system are insufficient to build C-ITS. In this paper, considering the continuity of time in various spatial aspects, we proposed a group-type network-based traffic situation recognition system that can recognize traffic flows and unexpected accidents through information linkage between traffic infrastructures. It is expected that the proposed system can primarily respond to accident detection and warning in the field, and can be utilized as more diverse traffic information services through information linkage with other systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.546-549
• /
• 2022

In recent years, to prevent the increase in accidents at industrial sites, various innovative technologies from the 4th industrial era have been incorporated into the construction administration to promote the advancement of safety management. As a result, smart safety management systems using intelligent monitoring that prevent and manage risks in industrial sites in real time are attracting attention. Smart safety management systems provide users with real-time, remote monitoring of factors such as noise, gas concentration fine dust concentration, building material quality, building tilt, and RFID-based worker access through sensors located everywhere. This paper presents a method for collecting and monitoring various data for smart safety management systems via Zigbee communication using Raspberry Pi.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.45-53
• /
• 2008

The animatronics technique could be very important fact of technique not only to achieve full completion of visible image but also to offer lots of chances to express images by merging CG, special effects and special devices. In this thesis, we design and implement the Zigbee-based wireless transceiver and communication program to control animal animatronics such as a dog and bear. The wireless control utilizing the Zigbee protocol is that electrically consumption is more small than the Bluetooth and reliability of data transmission is better. The implemented control systems and program have the normal and replay function for control of animal models. This functions and operability are tested by a designed animatronics prototype under the wireless environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.774-783
• /
• 2012

A simple, accurate, secure, long-lasting, and portable hybrid positioning system is proposed and designed in this paper. It consists of a lighting LED that generates visible light data corresponding to position information of a target and a Zigbee wireless network communication module with low power, security, and service area expansion characteristics. Under an indoor environment where there is 23.62m distance between an observer and the target, the presented hybrid positioning system is tested and is verified with the functions of Zigbee three hop wireless networking and visible light communication (VLC) scheme. The test results are analyzed and discussed.

• Journal of Korea Multimedia Society
• /
• v.23 no.3
• /
• pp.421-429
• /
• 2020

Recently, with the development of IoT technology and the increase of energy consumption, interest in energy saving and energy efficiency improvement is rapidly increasing. In particular, in the case of a device connected to a power plug with the power shutoff, a problem with standby power has been raised. Thus technology development through a low power method such as Zigbee is in progress. However, Zigbee, which is generally used, has a problem that a separate gateway is required because it is not an IP-based technology, and there is a problem that it is not suitable for a traditional computer network to which a variety of devices are connected. Therefore, in this paper, we designed and implemented a standby power saving system using MQTT, an IoT standard protocol, in Z-Wave environment. In order to evaluate the implemented standby power saving system, the same environment as the existing Zigbee-based standby power saving system was compared and evaluated.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1597_1598
• /
• 2009

In this paper, the techniques and design focus of flexible gain coltrol of LAN(Low Noise Amplifier) using the TSMC 0.18um CMOS process. The design frequency set up a standard on 2.4GHz that is used in Zigbee system. The design concepts a basic Cascode LNA techniques and a swiching circuit consisted of 4 NMOS of load resistance, which convert the output impedenceby tuning on or off. The result show the gain change by NMOS operated swich. The simulation result is that Gain is 10.23~12.96dB and NF(Noise Figure) is 1.41~1.47dB.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.186-194
• /
• 2008

This paper has implemented a ubiquitous healthcare system that can measure and check the electrocardiogram of a human body in anytime and anywhere. The implemented prototype is composed of electrocardiogram measurement terminal, data gathering base node, and medical information server. The implemented node constructs a sensor network using the Zigbee protocol and the TinyOS is installed on each node. The data gathering base node is linux-based node that can transfer sensed medial data through wireless LAN. And, the medical information server stores the processed medical data and can promptly notify the urgent status to the connected medical team. Through experiment, we confirmed the possibility of ubiquitous healthcare system based on sensor network using the Zigbee.