• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.419-430
• /
• 2022

Defects in solids play a vital role on thermoelectric properties through the direct impacts of electronic band structure and electron/phonon transports, which can improve the electronic and thermal properties of a given thermoelectric semiconductor. Defects in semiconductors can be divided into four different types depending on their geometric dimensions, and thus understanding the effects on thermoelectric properties of each type is of a vital importance. This paper reviews the recent advances in the various thermoelectric semiconductors through defect engineering focusing on the charge carrier and phonon behaviors. First, we clarify and summarize each type of defects in thermoelectric semiconductors. Then, we review the recent achievements in thermoelectric properties by applying defect engineering when introducing defects into semiconductor lattices. This paper ends with a brief discussion on the challenges and future directions of defect engineering in the thermoelectric field.

• Journal of Korea Foresty Energy
• /
• v.23 no.2
• /
• pp.9-20
• /
• 2004

Growth and nutrients of Xinjiang poplar (Populus alba var. pyramidalis) seedlings treated with fertilizers and soil amendments were examined in nursery and windbreak at Dengkou after 6 months of treatments in Inner Mongolia, China. Soil water content was $10\%$ higher than that at most soils in desert. Height and diameter growth and foliar nitrogen (N) concentration were higher at N and nitrogen plus phosphorus (N+P) fertilizer treatments than other treatments. However, there were no differences in foliar P concentration among treatments in windbreak and foliar P concentration was higher at control than at other treatments in nursery. Yuho treatment increased height and diameter growth. Nitrogen appeared an influenciug factor for early growth of Xinjiang poplar, and P had a minor affect on growth. More long-time studies were needed to elucidate the effects of fertilizers and soil amendments on growth and nutrients of Xinjiang poplar.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.236.1-236.1
• /
• 2010

Due to global warming, the need to secure an alternative resource has become more important nationally. Due to the high tidal range of up to 9.7m on the west coast of Korea, numerous tidal current projects are being planned and constructed. The rotor, which initially converts the energy, is a very important component because it affects the efficiency of the entire system, and its performance is determined by various design variables. In this paper, a design guideline of current generating HAT rotor and acceptable field rotor in offshore environment is proposed. To design HAT rotor model, wind mill rotor design principles and turbine theories were applied based on a field HAT rotor experimental data. To verify the compatibility of the rotor design method and to analyze the properties of design factors, 3D CFD model was designed and analysed by ANSYS CFX. The analysis results and findings are summarized in the paper.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.159.1-159.1
• /
• 2011

Due to the global warming, the need to secure the alternative resources has become more important worldwide. Having very strong current on the west coast with up to 10 m tidal range, there are many suitable sites for the application of TCP(Tidal current power) in Korea. Not only from the current produced from the high tidal range, but also it can be widely applied to the offshore jetties and piers. The VAT(Vertical axis turbine) system could be very effective tidal device to extract the energies from the attacking flow to the structures. For the relatively slow current speed, the VAT system could be more effective application than HAT(Horizontal axis turbine) device. The performance of VAT can be evaluated by various parameters including number of blades, shape, sectional size, diameters and etc. The paper introduces the multi-layer vertical axis tidal current power system with savonius turbine. The turbine was designed with consideration of optimal blade numbers and the performance was simulated by CFD analysis.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.6
• /
• pp.730-736
• /
• 2016

Recent research suggests the various applications of Model Predictive Control on vehicle systems. In numerous cases, nonlinear tire models such as the Magic Formula, which are highly complex and are more detailed than necessary, are used. This paper presents a nonlinear tire model that excludes the region of negative slope but expresses the nonlinear properties of tire well enough for tracking the lane of a racing course. The proposed inverse tire model can also be used to calculate the slip angle from the tire force. Thus, the model can be utilized to design the Model Predictive Controller.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.3043-3050
• /
• 2022

In Korea, all nuclear power plants (NPPs) participate in annual performance tests including in vivo measurements using the FastScan, a stand type whole body counter (WBC), manufactured by Canberra. In 2018, all Korean NPPs satisfied the testing criterion, the root mean square error (RMSE) ≤ 0.25, for the whole body configuration, but three NPPs which participated in an additional lung configuration test in the fission and activation product category did not meet the criterion. Due to the low resolution of the FastScan NaI(Tl) detectors, the conventional peak analysis (PA) method of the FastScan did not show sufficient performance to meet the criterion in the presence of interfering radioisotopes (RIs), ¹³⁴Cs and ¹³⁷Cs. In this study, we developed an artificial neural network (ANN) to improve the performance of the FastScan in the lung configuration. All of the RMSE values derived by the ANN satisfied the criterion, even though the photopeaks of ¹³⁴Cs and ¹³⁷Cs interfered with those of the analytes or the analyte photopeaks were located in a low-energy region below 300 keV. Since the ANN performed better than the PA method, it would be expected to be a promising approach to improve the accuracy and precision of in vivo FastScan measurement for the lung configuration.

• Natural Product Sciences
• /
• v.29 no.2
• /
• pp.59-66
• /
• 2023

The anti-melanogenic activity of 259 actinomycete strains was tested, and based on the results for the inhibition of mushroom tyrosinase activity and the reduction in melanin content, Micromonospora sp. JCS1 and JCS7 were selected as the strains with the highest anti-melanogenic potential. The activity-guided fractionation of extracts from JCS1 and JCS7 led to the isolation of the dipeptides cyclo(ʟ-Phenyl alanine (Phe)-ʟ-Proline (Pro)) (1) and cyclo(ʟ-Tryptophan (Trp)-ʟ-Proline (Pro)) (2). These two compounds were tested for their inhibition of mushroom tyrosinase by monitoring ʟ-DOPA levels and melanin production. Cyclo(ʟ-Phe-ʟ-Pro) (1) and cyclo(ʟ-Trp-ʟ-Pro) (2) were thus confirmed to have the potential for use in functional whitening cosmetics containing actinomycete-derived secondary metabolites.

• Journal of the Korean Chemical Society
• /
• v.39 no.8
• /
• pp.643-649
• /
• 1995

The Menschutkin type reactions of substituted(Z)-benzyl systems with substituted(Y)-pyridines and N,N-dimethyl aniline have been studied by the electro-conductometric method in acetonitrile at 35$^{\circ}C$ and 50$^{\circ}C$. On the plot of $k_{obs}$ versus concentrations of nucleophile under pseudo-first order conditions, 3,$4-(CH_3/O)_2$-benzyl bromide and $4-CH_3O$-benzyl bromide were a positive intercept at zero concentration of nucleophile. The $k_1$ value for each compound was invariant with the different nucleoephile. However, $4-CH_3-$ and other electron withdrawing substituents of benzyl bromides did not show the positive intercept. These results are suggested that the reactions have been proceeding simultaneously and independently for the activated benzyl bromides via direct bimolecular and intimate ion pair intermediate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.817-823
• /
• 2017

In the past, research has been conducted on the development of an adaptive cruise control algorithm considering fuel efficiency, and an adaptive cruise control system considering fuel efficiency have been developed. However, research on optimizing vehicle and adaptive cruise control parameters in order to maximize performances is insufficient. In this study, the design optimization of vehicle and control parameters considering fuel efficiency, trackability, ride comfort and safe distance is performed. This paper proposes performance measures of vehicle behavior and develops an adaptive cruise control system. In addition, based on the screening of vehicle parameters that significantly influence performances, kriging surrogate models are constructed through a sequential design of experiment, and kriging surrogate model-based design optimization is performed to maximize fuel efficiency and satisfy target performances.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.222-228
• /
• 2016

Background: We are developing a small size dosimeter for dose estimation in particle therapies. The developed dosimeter is an optical fiber based dosimeter mounting an radiation induced luminescence material, such as an OSL or a scintillator, at a tip. These materials generally suffer from the quenching effect under high LET particle irradiation. Materials and Methods: We fabricated two types of the small size dosimeters. They used an OSL material Eu:BaFBr and a BGO scintillator. Carbon ions were irradiated into the fabricated dosimeters at Heavy Ion Medical Accelerator in Chiba (HIMAC). The small size dosimeters were set behind the water equivalent acrylic phantom. Bragg peak was observed by changing the phantom thickness. An ion chamber was also placed near the small size dosimeters as a reference. Results and Discussion: Eu:BaFBr and BGO dosimeters showed a Bragg peak at the same thickness as the ion chamber. Under high LET particle irradiation, the response of the luminescence-based small size dosimeters deteriorated compared with that of the ion chamber due to the quenching effect. We confirmed the luminescence efficiency of Eu:BaFBr and BGO decrease with the LET. The reduction coefficient of luminescence efficiency was different between the BGO and the Eu:BaFBr. The LET can be determined from the luminescence ratio between Eu:BaFBr and BGO, and the dosimeter response can be corrected. Conclusion: We evaluated the LET dependence of the luminescence efficiency of the BGO and Eu:BaFBr as the quenching effect. We propose and discuss the correction of the quenching effect using the signal intensity ratio of the both materials. Although the correction precision is not sufficient, feasibility of the proposed correction method is proved through basic experiments.