• Title/Summary/Keyword: Yttrium-90

Search Result 33, Processing Time 0.028 seconds

Microshear bond strength according to dentin cleansing methods before recementation

  • Tasar, Simge;Ulusoy, Mutahhar Muhammed;Meric, Gokce
    • The Journal of Advanced Prosthodontics
    • /
    • v.6 no.2
    • /
    • pp.79-87
    • /
    • 2014
  • PURPOSE. The aim of this study was to determine the efficiency of Erbium, Chromium: Yttrium-Scandium-Gallium-Garnet laser in different output powers for removing permanent resin cement residues and therefore its influence on microshear bond strength compared to other cleaning methods. MATERIALS AND METHODS. 90 extracted human molars were sectioned in 1 mm thickness. Resin cement was applied to surface of sliced teeth. After the removal of initial cement, 6 test groups were prepared by various dentin surface treatment methods as follows: no treatment (Group 1), ethylene diamine tetra acetic acid application (Group 2), Endosolv R application (Group 3), 1.25 W Erbium, Chromium:Yttrium-Scandium-Gallium-Garnet laser irradiation (Group 4), 2 W Erbium, Chromium:Yttrium-Scandium-Gallium-Garnet laser irradiation (Group 5) and 3.5 W Erbium, Chromium:Yttrium-Scandium-Gallium-Garnet laser irradiation (Group 6). The topography and morphology of the treated dentin surfaces were investigated by scanning electron microscopy (n=2 for each group). Following the repetitive cementation, microshear bond strength between dentin and cement (n=26 in per group) were measured with universal testing machine and the data were analyzed by Kruskal Wallis H Test with Bonferroni correction (P<.05). Fracture patterns were investigated by light microscope. RESULTS. Mean microshear bond strength ${\pm}$ SD (MPa) for each group was $34.9{\pm}17.7$, $32.1{\pm}15.8$, $37.8{\pm}19.3$, $31.3{\pm}12.7$, $44.4{\pm}13.6$, $40.2{\pm}13.2$ respectively. Group 5 showed significantly difference from Group 1, Group 2 and Group 4. Also, Group 6 was found statistically different from Group 4. CONCLUSION. 2 W and 3.5 W Erbium, Chromium: Yttrium-Scandium-Gallium-Garnet laser application were found efficient in removing resin residues.

Strontium-90 Levels in Milk

  • Park, Chan-Kirl;Yang, Kyung-Rin
    • Nuclear Engineering and Technology
    • /
    • v.3 no.1
    • /
    • pp.9-13
    • /
    • 1971
  • The levels of strontium-90 in milk produced in Korea were determined during the past six years. Milk samples were collected from dairies and market shops in seoul area. Strontium-90 in milk was separated from calcium using fuming nitric acid and purified radiochemically. After seculear equilibrium was completed, the radioactivity of yttrium-90 was counted in a low background beta counting system. The determination of stable calcium in milk was also made by volu-metric method using 0. 1 N potassium permanganate solution. The highest value of 34.9 pCi $^{90}$ Sr/g-Ca was determined in August, 1966 and the lowest value was 7.5 pCi $^{90}$ Sr/g-Ca in August, 1967. From the result we can say that levels of strontium-90 are decreasing year after year and are far bellow the maximum permissible level recommended by International Committe on Radiation Protection.

  • PDF

Fallout Radioactivity in Korean Foodstutts (Part 4) Stronitium-90 in Liquid Whole Milk Produced in Korea (한국식품 중의 방사능 함량 (제4보) 한국 우유의 스트론튬-90 함량)

  • Yang Kyung Rin
    • Journal of the Korean Chemical Society
    • /
    • v.13 no.2
    • /
    • pp.181-186
    • /
    • 1969
  • The concentration of Strontium-90 in liquid whole milk produced in Korea were measured during past four years. The samples of milk were purchased from dairies in Seoul. Strontium-90 was analysed radiochemically and the amount of stable calcium was also determined. Radioactivity of Yttrium-90 was counted in low background beta counter which has the background of 1.38 cpm. The concentrations of Strontium-90 in the milk are 25.1 PCi $^{90}Sr$/g.Ca in 1965, 26.8 PCi $^{90}Sr$/g. Ca in 1966, 13.7 PCi 90Sr/g.Ca in 1967 and 18.2 PCi $^{90}Sr$/g.Ca in 1968 in annual average. The concentrations of Strontium-90 in the milk of 1967 and of 1968 were decreased approximately compared with the values of 60% 1965 and 1966. From the results we can see that Strontium-90 concentrations in the milk vary roughly proportionally with the specific activity of fallout. Considering on the safety problems, the Strontium-90 levels in the milk produced in Korea were far below the maximum permissible level recommended by ICRP.

  • PDF

Radiation segmentectomy for gastric leiomyosarcoma hepatic metastasis

  • Roh, Simon
    • Korean Journal of Clinical Oncology
    • /
    • v.14 no.2
    • /
    • pp.142-145
    • /
    • 2018
  • Metastases to the liver can be found in various malignancies, most commonly originating from the colon, rectum, pancreas, stomach, esophagus, breast, lung, and melanoma. Surgical resection of liver metastasis is generally considered to be the definitive therapy fore cure. However, many patients are unable to undergo surgical resection due to medical comorbidities or multifocal extent of malignant disease affecting the liver. Among patients not eligible for surgery, other therapies exist for treatment in order to down stage the disease for surgical resection or for palliation. Radioembolization of hepatic metastases has shown to improve outcomes among patients with variety of malignancies including more common malignancies such as colorectal cancer. Yttrium-90 (Y-90) radioembolization has been successfully used in the management of hepatic metastases. A small series of metastatic sarcoma to the liver treated with radioembolization showed a promising response. We report a case of metastatic gastric leiomyosarcoma to the liver treated with Y-90 glass microspheres therapy using the radiation segmentectomy approach, previously described for hepatocellular carcinoma.

Yttrium-Stabilized Zirconia Particles Prepared Using Electro-dialysis of (Zr,Y)OCl2 Aqueous Solution

  • Chang, Myung Chul
    • Journal of the Korean Ceramic Society
    • /
    • v.51 no.5
    • /
    • pp.466-471
    • /
    • 2014
  • Hydrous zirconia particles were prepared from $ZrOCl_2$ aqueous solution using an electro-dialysis [ED] process. For the preparation of $(Zr,Y)(OH)_4$ precipitates, 3 mol% $YCl_3$ was added into $ZrOCl_2$ aqueous solution. During the hydrolysis of 0.5 mol/L $(Zr,Y)OCl_2$ solution at $90^{\circ}C$ a slurry solution was obtained. The ED process was used for the removal of chlorine from the slurry solution. Two kinds of slurry solution were sampled at the beginning and end of the ED process. The morphology of hydrous zirconia particles in the solution was observed using an inverted optical microscope and an FE-SEM. The hydrous zirconia particles were nano-crystalline, and easily coagulated with drying. Yttrium stabilized zirconia [YSZ] powder could be obtained by the calcination of $(Zr,Y)(OH)_4$ precipitates prepared from a $(Zr,Y)OCl_2$ solution by the ED process. The coagulated dry powders were shaped and sintered at $1500^{\circ}C$ for 2 h. The sintered body showed a dense microstructure with uniform grain morphology.

Nano Yttrium-90 and Rhenium-188 production through medium medical cyclotron and research reactor for therapeutic usages: A Simulation study

  • Abdollah Khorshidi
    • Nuclear Engineering and Technology
    • /
    • v.55 no.5
    • /
    • pp.1871-1877
    • /
    • 2023
  • The main goal of the coordinated project development of therapeutic radiopharmaceuticals of Y-90 and Re-188 is to exploit advancements in radionuclide production technology. Here, direct and indirect production methods with medium reactor and cyclotron are compared to evaluate derived neutron flux and production yield. First, nano-sized 186W and 89Y specimens are suspended in water in a quartz vial by FLUKA simulation. Then, the solution is irradiated for 4 days under 9E+14 n/cm2/s neutron flux of reactor. Also, a neutron activator including three layers-lead moderator, graphite reflector, and polyethylene absorbent- is simulated and tungsten target is irradiated by 60 MeV protons of cyclotron to generate induced neutrons for 188W and 90Sr production via neutron capture. As the neutron energy reduced, the flux gradually increased towards epithermal range to satisfy (n/2n,γ) reactions. The obtained specific activities at saturation were higher than the reported experimental values because the accumulated epithermal flux and nano-sized specimens influence the outcomes. The beta emitters, which are widely utilized in brachytherapy, appeal an alternative route to locally achieve a rational yield. Therefore, the proposed method via neutron activator may ascertain these broad requirements.

Synthesis and Magnetic Properties of Nanosized Ce-substituted Yttrium Iron Garnet Powder Prepared by Sol-gel Method (졸-겔법에 의한 Cerium 치환 Nanosize YIG 분말의 합성 및 자기적 특성)

  • 장학진;김광석;윤석영;김태옥
    • Journal of the Korean Ceramic Society
    • /
    • v.38 no.11
    • /
    • pp.1008-1014
    • /
    • 2001
  • Nanosize YIG powders added by Cerium which is exellent element in magneto-optical effect were synthesized by Sol-Gel method using Ethylene Glycol solvent. In 120 to 150 minute reaction time, stable sol solution which showed no change in viscosity, pH, and aging time was obtained. Monolithic YIG was synthesized at 80$0^{\circ}C$ with DTA and XRD measurement and its lattice parameter had a tendency to increase from 12.3921 $\AA$. Increasing annealing temperature from 80$0^{\circ}C$ to 105$0^{\circ}C$, average particle size was in the range of 40 nm to 330 nm. Saturation magnetization (M$_{s}$) value was increased from 18.37 to 21.25 emu/g due to enhancement of YIG crystallity and decreasing of orthoferrite phase. On the other hand, coercivity (H$_{c}$) value increased up to 90$0^{\circ}C$ and then decreased above 90$0^{\circ}C$. With increasing Ce addition, coercivity was almost not changed but saturation magnetization value was maximum at Ce 0.1 mol% and then decreased because of increasing a orthoferrite amount. Also, curie temperature (T$_{c}$) of YIG were not changed with Ce addition.ion.

  • PDF

Development of shielding device for bremsstrahlung radiation from Y-90 microspheres (Y-90 microsphere 로부터 생성되는 제동복사선의 차폐를 위한 차폐체 개발 연구)

  • Park, Jun Young
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.23 no.1
    • /
    • pp.50-53
    • /
    • 2019
  • Purpose Yttrium-90 (Y-90) is high-energy beta emitters ($E{\beta}$, max = 2.28 MeV) with the mean penetration depth of 2.5 mm in tissue. Radioactive microspheres containing Y-90 is widely used for the transarterial radioembolization of hepatocellular carcinoma. However, bremsstrahlung radiation from Y-90 can cause the external radiation exposure to medical staff who handle the Y-90 microspheres. In this study, shielding device for Y-90 microspheres was developed to minimize the external radiation exposure. Materials and Methods Y-90 microsphere shielding device was made from 6 mm thicknesses of tungsten including the lead glass window. Radiation shielding ability of Y-90 microsphere shielding device was evaluated using 4 GBq of $SIR-Spheres^{(R)}$ Y-90 microspheres. The bremsstrahlung radiation was measured using radiation survey meter. Results The mean radiation dose of Y-90 microspheres in acrylic shield was $261.7{\pm}2.3{\mu}Sv/h$ (n=5) at 10 cm away from the shield. With the additional tungsten shielding device, it was $23.7{\pm}1.3{\mu}Sv/h$ (n=5). Thus, the bremsstrahlung radiation dose was decreased by 90.9%. At 50 cm away from the shield, bremsstrahlung radiation was reduced by 89.2% after using tungsten shielding device. Conclusion During the preparation and radioembolization of Y-90 microsphere, medical staff are exposed to external radiation. In this study, we demonstrated that the use of tungsten shielding device devices significantly reduced the amount of bremsstrahlung radiation. Y-90 microsphere tungsten shielding device can be highly effective in reducing the bremsstrahlung radiation.

Radioimmunotherapy in Head and Neck Cancer (두경부암에서 방사면역치료의 역할)

  • Choi, Ik Joon
    • Korean Journal of Otorhinolaryngology-Head and Neck Surgery
    • /
    • v.61 no.12
    • /
    • pp.637-643
    • /
    • 2018
  • Radioimmunotherapy (RIT) is a therapy that takes advantage of the "cross-fire" effect of emitted radiation by radionuclides conjugated to tumor-directed monoclonal antibodies (mAb) (including those fragments) or peptides. While RIT has been successfully employed for the treatment of lymphoma, mostly with radiolabeled antibodies against CD20 [$^{90}yttrium$ ($^{90}Y$)-ibritumomab tiuxetan; $Zevalin^{(R)}$ and $^{131}iodine$ ($^{131}I)-tositumomab$; $Bexxar^{(R)}$], its use in solid tumors is more challenging, so far. Immuno-PET, a tool for tracking and quantification of mAbs with PET in vivo, is an exciting novel option to improve diagnostic imaging and guide mAb-based therapy. RIT in solid tumors including head and neck cancer may be an alternative treatment with advances in various biological, chemical, and treatment procedures, and it may help to reduce unnecessary exposure and enhance the therapeutic efficacy. Also, immuno-PET based on RIT might play an important role in cancer staging, in patients or targets selection of targeted therapeutics and in monitoring the response of targeted therapeutics as precision medicine. In this review, fundamentals of RIT/immune-PET and current knowledge of the preclinical/clinical trials in RIT for solid tumor including head and neck cancer are reviewed.

Microstructure and Electrical Properties of Pb(Mg1/3Nb2./3)O3-PbTiO3-PbZrO3 Ceramics Modified with Yttria (Pb(Mg1/3Nb2./3)O3-PbTiO3-PbZrO3계에 Yttria 첨가시 미세구조와 전기적 물성변화에 관한 연구)

  • 김창삼;이응상
    • Journal of the Korean Ceramic Society
    • /
    • v.24 no.3
    • /
    • pp.263-269
    • /
    • 1987
  • It is investigated that the determination of the correlation between the change of microstructure and electrical properties. Yttria is added to the compositiojn of rhombohedral region in Pb(Mg1/3Nb2./3)O3-PbTiO3-PbZrO3 ternary system. Average grian size, lattice parameters and distribution of yttrium are characterized by XRD, SEM and EDS. Electrical properties are determined by measurement of Curie temperature, piezoelectric properties and hysteresis loops. The results are as follows; 1. Both lattice parameters, a and ${\alpha}$, are changed by addition of yttria to the composition of rhomboheadral region in Pb(Mg1/3Nb2./3)O3-PbTiO3-PbZrO3 ternary system and Curie temperature is proportional to the values at (90-${\alpha}$).

  • PDF