• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.14-26
• /
• 2018

The Biotope Area Ratio (BAR) is a quantitative pre-planning index for sustainable development and an integrated indicator for the balanced development of buildings and outdoor spaces. However, it has been pointed out that there are problems in operations management: errors in area calculation, insufficiency in the underground soil condition and depth, reduction in biotope area after construction, and functional failure as a pre-planning index. To address these problems, this study proposes implementing LIM. Since the weights of the BAR are mainly decided by the underground soil condition and depth with land cover types, the study focused on the terrain and pavements. The model should conform to BIM guidelines and standards provided by government agencies and professional organizations. Thus, the scope and Level Of Detail (LOD) of the model were defined, and the method to build a model with BIM software was developed. An apartment complex on sloping ground was selected as a case study, a 3D terrain modeled, paving libraries created with property information on the BAR, and a LIM model completed for the site. Then the BAR was calculated and construction documents were created with the BAR table and pavement details. As results of the study, it was found that the application of the criteria on the BAR and calculation became accurate, and the efficiency of design tasks was improved by LIM. It also enabled the performance of evidence-based design on the terrain and underground structures. To adopt LIM, it is necessary to create and distribute LIM library manuals or templates, and build library content that comply with KBIMS standards. The government policy must also have practitioners submit BIM models in the certification system. Since it is expected that the criteria on planting types in the BAR will be expanded, further research is needed to build and utilize the information model for planting materials.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.249-258
• /
• 1998

This study was researched the state and problem of the soft contact Lens wear by the history and inverted microscopy. The results was as follows; 1. The first use of contact lens wear was the 15 years and the last use was the 26 years. The first age of most contact lens wear was the 19 years. 2. In the almost contact lens wearers, the first visual test was the optical shop. 3. At present, almost soft contact lens purchase the optical shop 4. At present, most contact lens wearer like a soft type. 5. At present, most soft contact lens were a domestic production, and some subjects were foreign country production, but some subjects were unknown. 6. After contact lens wear, most subjects don't known the corrected visual acuity, especially, almost people don't known the binocular visual acuity. 7. At present, on soft contact lens color, the teens like the non-color contact lens, twenties like the color contact lens, but thirties was not known. 8. On the advantage of soft contact lens knowledge, most teens and twenties were only one, thirties was unknown. 9. On the disadvantage of soft contact lens knowledge, most teens and thirties were only one, twenties were two. 10. On the side effect of soft contact lens wearer, teens was one, and twenties and thirties don't known. 11. On the main symptoms of soft contact lens wearer, total kinds were seven, On these kinds, most subjects were not symptoms, the next order was unknown on the symptom. But, On the symptoms, the main symptoms was the pain and dry eye. 12. At present, the research on the surface morphology of soft contact lens by inverted microscope, the lens repture, lens folding, foreign body immersion and etc were present. Above the study, most contact lens was soft lens, and the purchase was the optical shop, on the other hand, the knowledge of soft contact lens and visual acuity was few. As a results, On the practical problems of soft contact lens wear, the optician have to the soft contact lens treatment and aftercare by law and educational supporting.

• Clinical and Experimental Pediatrics
• /
• v.52 no.7
• /
• pp.791-797
• /
• 2009

Purpose : We aimed to investigate the clinical manifestations of and antibiotic resistance in culture-proven childhood salmonellosis. Methods : Clinical manifestations and laboratory data of and antibiotic use in subjects with culture-proven childhood salmonellosis, who were treated at the Chonbuk National University Hospital between September 1998 and August 2008, were analyzed retrospectively. Patients with underlying diseases or concomitant illnesses were excluded. Results : We assessed a total of 72 patients. There were 68 stool culture-positive cases, 7 blood culture-positive cases, and 3 both stool culture- and blood culture-positive cases. Salmonella group D was the most frequent pathogen in stool (63.9%) and blood (71.4%) cultures. Salmonella typhi was isolated in 1 case. Of the 72 patients, 45 (62.5%) were male children, of which 29 (40.3%) were aged <3 years. The patients most commonly presented with diarrhea (90.2%) and fever (83.3%). Leukocytosis (leukocyte count, >$15,000/{\mu}L$) and leukopenia (leukocyte count, <$4,000/{\mu}L$) were detected in 8.3% and 5.6% of the patients, respectively. Elevated serum C-reactive protein concentration (>5 mg/dL) and erythrocyte sedimentation rate (>20 mm/h) were observed in 88.9% and 58.3% of the patients, respectively. Fifty-two (85.2%) of 61 patients who had undergone antibiotic treatment received a third-generation cephalosporin as definitive antibiotic therapy. Multidrug resistance rate was 40.0 % in the first 5 years of the study and 71.4% in the last 5 years. No fatalities occurred in this series. Conclusion : Children with culture-proven salmonellosis showed relatively benign clinical outcomes. Appropriate antibiotic treatment of <2 weeks is probably adequate for those without a suppurative focus of infection. The incidence of antibiotic resistant isolates was recently seen to increase.

• Clinical and Experimental Pediatrics
• /
• v.50 no.12
• /
• pp.1188-1193
• /
• 2007

Purpose : The prevalence of rickets in the world is on the rise not only in developing but also in developed countries. In Korea, breastfeeding has increased. There have been few studies on the possible association of rickets with breastfeeding. The purpose of this study was to identify the development and the clinical presentation of subclinical rickets in breastfed infants. Methods : We investigated patients who were breastfed and had hypovitaminosis D in the blood from May 2006 to April 2007, and who were diagnosed with vitamin D deficient rickets from May 2003 to April 2006. We evaluated the results of blood tests, x-rays and other relevant information in the medical record. A questionnaire that included questions on the diet of patients, the mothers activity during pregnancy and place of residence was administered. Results : Twelve patients (66%: male, 34%: female) were enrolled in this study. There were eight in the asymptomatic and four in the symptomatic group. The median age for each group was 8 months (range 4-11 month) and 5.5 months (5-8 month). All patients in the symptomatic group were breastfed until diagnosed. In the asymptomatic group, they were breastfed for four to six months, and then weaned with only thin rice soup and vegetables. Nine patients had a vitamin D concentration below 20 ng/mL and three patients had levels between 20 and 29 ng/mL. Alkaline phosphatase (ALP) and parathyroid hormone (PTH) were elevated in both groups. There were statistically significant $25-OHD_3$ levels in the blood in both groups (P=0.008). Ten of the patients (83%) also had iron deficient anemia. Conclusion : Vitamin D deficiency and subclinical rickets has been identified in Korea. However, the prevalence of this disease has not been determined. The main limitation of this study was the small number of patients and the absence of a control group.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.191-201
• /
• 2011

Soybean has widely grown for its edible bean which has numerous uses. Microwave remote sensing has a great potential over the conventional remote sensing with the visible and infrared spectra due to its all-weather day-and-night imaging capabilities. In this investigation, a ground-based polarimetric scatterometer operating at multiple frequencies was used to continuously monitor the crop conditions of a soybean field. Polarimetric backscatter data at L, C, and X-bands were acquired every 10 minutes on the microwave observations at various soybean stages. The polarimetric scatterometer consists of a vector network analyzer, a microwave switch, radio frequency cables, power unit and a personal computer. The polarimetric scatterometer components were installed inside an air-conditioned shelter to maintain constant temperature and humidity during the data acquisition period. The backscattering coefficients were calculated from the measured data at incidence angle $40^{\circ}$ and full polarization (HH, VV, HV, VH) by applying the radar equation. The soybean growth data such as leaf area index (LAI), plant height, fresh and dry weight, vegetation water content and pod weight were measured periodically throughout the growth season. We measured the temporal variations of backscattering coefficients of the soybean crop at L, C, and X-bands during a soybean growth period. In the three bands, VV-polarized backscattering coefficients were higher than HH-polarized backscattering coefficients until mid-June, and thereafter HH-polarized backscattering coefficients were higher than VV-, HV-polarized back scattering coefficients. However, the cross-over stage (HH > VV) was different for each frequency: DOY 200 for L-band and DOY 210 for both C and X-bands. The temporal trend of the backscattering coefficients for all bands agreed with the soybean growth data such as LAI, dry weight and plant height; i.e., increased until about DOY 271 and decreased afterward. We plotted the relationship between the backscattering coefficients with three bands and soybean growth parameters. The growth parameters were highly correlated with HH-polarization at L-band (over r=0.92).

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.93-100
• /
• 2011

Maintenance of adequate soil water potential during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil water movement within and below the rooting zone can facilitate optimal irrigation scheduling aimed at minimizing the adverse effects of water stress on crop growth and development and the leaching of water below the root zone which can have adverse environmental effects. The objective of this study was to evaluate the feasibility of using a portable irrigation controller with an Watermark sensor for the cultivation of drip-irrigated vegetable crops in a greenhouse. The control capability of the irrigation controller for a soil water potential of -20 kPa was evaluated under summer conditions by cultivating 45-day-old tomato plants grown in three differently textured soils (sandy loam, loam, and loamy sands). Water contents through each soil profile were continuously monitored using three Sentek probes, each consisting of three capacitance sensors at 10, 20, and 30 cm depths. Even though a repeatable cycling of soil water potential occurred for the potential treatment, the lower limit of the Watermark (about 0 kPa) obtained in this study presented a limitation of using the Watermark sensor for optimal irrigation of tomato plants where -20 kPa was used as a point for triggering irrigations. This problem might be related to the slow response time and inadequate soil-sensor interface of the Watermark sensor as compared to a porous and ceramic cup-based tensiometer with a sensitive pressure transducer. In addition, the irrigation time of 50 to 60 min at each of the irrigation operation gave a rapid drop of the potential to zero, resulting in over irrigation of tomatoes. There were differences in water content among the three different soil types under the variable rate irrigation, showing a range of water contents of 16 to 24%, 17 to 28%, and 24 to 32% for loamy sand, sandy loam, and loam soils, respectively. The greatest rate increase in water content was observed in the top of 10 cm depth of sandy loam soil within almost 60 min from the start of irrigation.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.267-275
• /
• 2000

In an effort to assess the reliability of satellite altimeter system, we conducted a comparative analysis of sea level data that were collected using the TOPEX/POSEIDON (T/P) altimeter and the 10 tide gauge (TG) stations in the satellite passing track. The analysis was made using data sets collected from marginal sea regions surrounding the Korean Peninsula at T/P cycles of 2 to 230, which correspond to October 1992 to December 1998. Because of strong tidal activity in the study area, treatment of tidal errors is a very critical step in data processing. Hence in the computation of dynamic heights from the Tn data, we adapted the procedures of Park and Gamberoni (1995) to reduce errors associated with it. When these T/P data were treated, the alias periods of M$_2$, S$_2$, and K$_1$ constitutions were found at 62.1, 58.7, and 173 days. The compatibility of the T/P and TG data sets were examined at various filtering periods. The results indicate that the low-frequency signal of Tn data can be interpreted more safely with longer filtering periods (such as up to the maximum selected values of 200 days). When RMS errors for 200-day low-pass filter period was compared among the whole 10 tidal stations, the values spanned in the range of 2.8 to 6.7 cm. The results of correlation analysis at this filtering period also showed a strong agreement between the Tn and TG data sets over the whole stations investigated (e.g., P values consistently less than 0.0001). According to our analysis, we conclude that the analysis of surface sea level using satellite altimeter data can be made safely and reasonably long filtering periods such as 200 days.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.503-510
• /
• 2012

Microwave radar can penetrate cloud cover regardless of weather conditions and can be used day and night. Especially a A ground-based polarimetric scatterometer operating at multiple frequencies can continuously monitor the crop conditions. We analyzed scattering characteristics of rice and soybean using pauli decomposition method. Surface scattering (${\alpha}$) is the dominant component over the entire stages for all bands and pauli decomposition value was the highest for L-band. Double bounce scattering (${\beta}$) and volume scattering (${\gamma}$) were approximately equal for C-band and volume scattering was higher than double bounce scattering for X-band in rice field. In soybean, double bounce scattering becomes higher than volume scattering during the R2 stage (DOY 224) and there was a significant difference between the two components after the R4 stage (DOY 242) for L-band. The maximum growth stage of soybean can also be detected using L-band double bounce scattering. The peak of double bounce effect coincides with the peak of growth biophysical variables on DOY 271. We found that pauli decomposition can provide insight on the relative magnitude of different scattering mechanisms during the rice and soybean growth cycle.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.555-559
• /
• 2012

Manures contain a variety of pathogenic microorganisms that pose a risk to human or animal. On-farm contaminations through contaminated manure were considered likely sources of the pathogen for several outbreak. Pathogenic microorganisms may survive in low numbers during the composting process and subsequently regrow to high levels under favorable conditions. The objective of this study was to investigate effect of temperature on survival of Salmonella enterica and Staphylococcus aureus in livestock manure compost. Commercial livestock manure compost (manure 60%, sawdust 40%) was inoculated with S. enterica and S. aureus. Compost was incubated at four different temperatures (10, 25, 35, and $55^{\circ}C$) for 20 weeks. Samples were taken every week during incubation depending on the given conditions. S. enterica persisted for up to 1 day in livestock manure compost at $55^{\circ}C$, over 140 days at $10^{\circ}C$, 140 days at $25^{\circ}C$, and 70 days at $35^{\circ}C$, respectively. S. aureus persisted for up to 1 day in livestock manure compost at $55^{\circ}C$ and 90 days at $10^{\circ}C$, 70 days at $25^{\circ}C$, and 40 days at $35^{\circ}C$, respectively. The results indicate that S. enterica and S. aureus persisted longer under low temperature condition. S. enterica survived longer than S. aureus at three different temperatures (10, 25, and $35^{\circ}C$). This study will provide useful and practical guidelines to applicators of soil in deciding appropriate handling and time frames for land application of livestock manure compost for sustainable agriculture. Results from these studies provide useful information in identifying manure handling practices to reduce the risk of S. enterica and S. aureus transmission to fresh produce.

• Journal of the Korean Vacuum Society
• /
• v.21 no.3
• /
• pp.142-150
• /
• 2012

In this Study, Mo back electrode were deposited as the functions of various working pressure, deposition time and plasma per-treatment on sodalime glass (SLG) for application to CIGS thin film solar cell using by DC sputtering method, and were analyzed Mo change to $MoSe_2$ layer through selenization processes. And finally Mo back electrode characteristics were evaluated as application to CIGS device after Al/AZO/ZnO/CdS/CIGS/Mo/SLG fabrication. Mo films fabricated as a function of the working pressure from 1.3 to 4.9mTorr are that physical thickness changed to increase from 1.24 to 1.27 ${\mu}m$ and electrical characteristics of sheet resistance changed to increase from 0.195 to 0.242 ${\Omega}/sq$ as according to the higher working pressure. We could find out that Mo film have more dense in lower working pressure because positive Ar ions have higher energy in lower pressure when ions impact to Mo target, and have dominated (100) columnar structure without working pressure. Also Mo films fabricated as a function of the deposition time are that physical thickness changed to increase from 0.15 to 1.24 ${\mu}m$ and electrical characteristics of sheet resistance changed to decrease from 2.75 to 0.195 ${\Omega}/sq$ as according to the increasing of deposition time. This is reasonable because more thick metal film have better electrical characteristics. We investigated Mo change to $MoSe_2$ layer through selenization processes after Se/Mo/SLG fabrication as a function of the selenization time from 5 to 40 minutes. $MoSe_2$ thickness were changed to increase as according to the increasing of selenization time. We could find out that we have to control $MoSe_2$ thickness to get ohmic contact characteristics as controlling of proper selenization time. And we fabricated and evaluated CIGS thin film solar cell device as Al/AZO/ZnO/CdS/CIGS/Mo/SLG structures depend on Mo thickness 1.2 ${\mu}m$ and 0.6 ${\mu}m$. The efficiency of CIGS device with 0.6 ${\mu}m$ Mo thickness is batter as 9.46% because Na ion of SLG can move to CIGS layer more faster through thin Mo layer. The adhesion characteristics of Mo back electrode on SLG were improved better as plasma pre-treatment on SLG substrate before Mo deposition. And we could expect better efficiency of CIGS thin film solar cell as controlling of Mo thickness and $MoSe_2$ thickness depend on Na effect and selenization time.