• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.238-240
• /
• 1991

Langmuir-Blodgett(L.B) method is one of the most possible candidate for the fabrication of the micro scale memory or electrical devices. As for a fundamental study on the conduction mechanism in the organic thin membrane, N-alkyl quinolium-TCNQ complexes were synthesized and their physical properties were examined spectroscopically. LB film was produced by using Moving Wall Type LB Apparatus. The average area per molecule (N-docosylquinolium-TCNQ) was $67.97{\AA}^2$ which is ${\AA}^2$ larger than N-docosyl quinolium-TCNQ.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권4호
• /
• pp.276-281
• /
• 2010

A 2.5 V feed-forward second-order deltasigma modulator for audio application is presented. A 9-level quantizer with a tree-structured dynamic element matching (DEM) was employed to improve the linearity by shaping the distortion resulted from the capacitor mismatch of the feedback digital-toanalog converter (DAC). A chopper stabilization technique (CHS) is used to reduce the flicker noise in the first integrator. The prototype delta-sigma analogto-digital converter (ADC) implemented in a 65 nm 1P8M CMOS process occupies 0.747 $mm^2$ and achieves 109.1 dB dynamic range (DR), 85.4 dB signal-to-noise ratio (SNR) in a 24 kHz audio signal bandwidth, while consuming 14.75 mW from a 2.5 V supply.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1832-1833
• /
• 2011

석탄연소 화력발전소 보일러의 최적 제어는 부하요구에 대하여 보일러 출력을 신속히 제어하고, 보일러 출력에 대하여 보일러 입력에너지인 석탄 유량을 조절하여 에너지 균형을 맞추는 것이다. 이는 안정된 부하뿐 아니라 부하변동시에도 균형을 유지하면서 제어해야 한다. 석탄 연소 보일러 에너지 입력이 되는 석탄유량 측정 및 보정은 유류나 가스연료보다 까다롭고, 석탄 연료의 발열량이 시간에 대하여 변하는 문제가 있으므로, 신속하고 안정된 제어 성능을 위해 계측된 석탄 유량을 설계기준치로 환산, 보정하여 제어해야 한다. 이에 대한 기술은 일찍이 보일러 출력인 증기 보유열량을 측정하여 실제 계측한 석탄 유량을 연속적으로 보정하는 기법을 사용하고 있다. 이에 대한 석탄 열량 보정 제어로직을 검토하여 최적 튜닝방안에 대하여 고찰하고자 한다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.1114-1116
• /
• 2005

Shop floor control systems (SFCS) are used to make real-time planning and scheduling decisions to optimize the efficiency of manufacturing shops. These shops exhibit a non-linear, dynamic evolution caused by 1) the concurrent flows of disparate parts following complex routings, 2) a variety of machines that breakdown at random times, 3) stochastic arrivals of new parts with different priorities, and 4) jobs that have probabilistic processing times and transportation times. Because of their ability to capture that evolution faithfully, simulation models are often used in the aforementioned decisions. In this paper, various types of decision-making problems encountered in a shop floor have been investigated and categorized into process related problems and resource related problems for shop floor simulation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.160-163
• /
• 2000

Monolayers of lipids on a water surface have attracted much interest as models of biological membranes. but also as precursors of multilayer systems promising many technical applications. They exhibit very interesting physico-chemical properties as two-dimensional and interfacial systems. Until now. many potential methodologies have been developed in order to gain a better understanding of the relationship between the structure and function of the monolayers.

• 전기학회논문지
• /
• 제59권3호
• /
• pp.614-622
• /
• 2010

The goal of this paper is to develope the control program based on model which can be applied to 1000MW class coal fired thermal power plant. 1000MW class power plant has the higher efficiency and lower cost because the steam conditions of the ultra super-critical process are higher than them of the previous power plants in temperature and pressure. The program includes the state variable controls which have the desired characteristics for the higher temperature and pressure. The program had been developed successfully using advanced process control. The simulation results using the new control program showed the better performance and safer control than them of the previous control program and we could verify the application possibility of the new program for the actual power plant through the load test, comparison, analysis and tuning.

• 대한공업교육학회지
• /
• 제30권1호
• /
• pp.1-18
• /
• 2005

The purpose of this study was to development a model of problem solving instruction for improving practical skill-competence in technical high school. For the study, various literature researches were reviewed intensively about problem solving process, laboratory instruction's approaches and learning principals. The problem solving instruction process was composed with identifying problems, generating alternative solutions, investigation and research, choosing a solution, acting on a plan, modeling of problem solving, testing and evaluating, redesigning and improving. The skills schema combines a four domain of skilled activity, that is, cognitive skills, psychomotor skills, reactive skills and interactive skills. The problem solving instruction was composed with five major learning systems-emotional, social, cognitive, physical, and reflective-that can be used extensively as generic lesson plashing. The teacher serves as a coach or guide for student learning. As a facilitator, the teacher challenges, questions, and stimulates the students in their thinking, problem solving and self-directed study. In this process, students represent problem with think aloud, assume responsibility for their learning and move from teacher-centered to student-centered education.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.67-70
• /
• 2001

While PV system is clean energy that do not now out environmental pollution, but is influenced much in surrounding environment. Efficiency decrease cause of PV system is various kinds, try to analyze several specification causes among them through simulation with reference for various kinds effect urea in treatise that see.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.864-867
• /
• 1992

This paper describes optimum conditions for depositing Langumuir Blodgett(LB) films. $\pi$-A isotherm characteristics were studied with the following species, $C_{18}$-Quinolium(TCNQ), $C_{22}$-Quinolium(TCNQ), Azobenzene, Arachidic Acid, by varing length of alkyl chains, temperacture, pH, spreading amount, barrier moving speed and etc. We have observed the change of $\pi$-A isotherm depending on the above variations. From there we investigate the depositing conditions of LB films for each material.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2215_2216
• /
• 2009

As a driving method of AC PDP, address display separated (ADS) scheme has been widely used. In ADS method, a picture of one frame is divided into eight subfields. In this paper, the effect of sustain voltage stress have been studied with several parameters. The experimental results show that sustain pulses in the previous subfield work as the stress to address discharge in the current subfield. It is also shown that as the voltage of the sustain period in the previous subfield increases, the address time lag in the current subfield decrease slightly.